emoguitarboy

Now my main question is how did u set up the HDD, Did you format it using Fdisk, disk management sounds like the usual culprate that I run into with a DDO (Dynamic Drive overlay) As far as a SATA drive setting it up for WinXP, you'll defineatly want to …

sounds like a trick I used to play on my techie friends, there is a switch (usaly red) in the same genral region where the power chord plugs in, that should be set to 110. some times if that is set to the Euro setting the computer won't boot. Was …

Hmmm...it sounds like sone kind of video error, not sure why the onboard video didn't work...I would suggest trying possibly another video card (is it AGP or PCI video card?)

I take it you're using a USB keyboard...I would suggest get an old school PS/2 keyboard, sometime the BIOS won't allow for support of USB devices

[url]http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/std_adp.php?p_faqid=84&p_created=1005005461&p_sid=klKktK*h&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MzEyJnBfcHJvZHM9JnBfY2F0cz0mcF9wdj0mcF9jdj0mcF9zZWFyY2hfdHlwZT1zZWFyY2hfZm5sJnBfcGFnZT0xJnBfc2VhcmNoX3RleHQ9anVtcGVyIHNldHRpbmdz&p_li=&p_topview=1[/url] here's the website for WD jumper setting I know that could be some help, have you tried with just the new WD drive in the computer to see if that drive is recognized? Or you could try putting the drives on seprate IDE channels, that may work

So I get a lot of calls wanting to know if you can use a drive on both Mac & PC, I think I have a solution...but I'm not sure, I want to know of any conflicts or any ideas why it won’t work. Easy steps to format an external …