Member Avatar for KosherGoddess

Hello Beautiful People of DaniWeb!

Recently I re-installed on my PCVRZ54G Sony Vaio, Windows XP Pro. I had to change my hard drive and avoid buying new computer.

Everything is fine and works well, except, my speakers, I know they work, I've tested them with my DiskMan, my sound card is fine since my USB headset is working too.
But! When I plug speakers into computer they are not even recognized in Sound settings.

SOS help! SOS help!!!

(if you are familiar wiz Vaios, they have they own System Restore pack, mine just would not work, so I've installed Win XP Pro)

Thank you all!

  • 3 Contributors
  • 2 Replies
  • 110 Views
  • 1 Month Discussion Span
  • Latest Post Latest Post by tomgreag

Dani AI

Generated

Quick, practical checklist that builds on 's driver suggestion and 's hardware reminder. The usual causes are either missing/incorrect drivers or a Windows configuration/service issue; the steps below are ordered from easiest to deeper fixes.

  1. Inspect Device Manager -> look under "Sound, video and game controllers". A device listed as "Multimedia audio controller" or with a yellow exclamation mark means the driver is missing.
  2. Open Control Panel -> Sounds and Audio Devices -> Audio tab to confirm a playback device is present and selected. Check the Windows mixer (Volume Control) for mute/volume settings.
  3. Verify services: "Windows Audio" must be running. Use Services (services.msc) to confirm its status and startup type.
  4. Reinstall drivers in this order: chipset/motherboard drivers first, then the motherboard/audio driver provided by the PC vendor or the audio-chip vendor (Realtek/Conexant/SoundMAX as applicable). If a vendor package won’t install, uninstall the audio device in Device Manager and reboot so Windows can re-detect it.
  5. Check BIOS/UEFI for an onboard-audio enable/disable option. If onboard audio is disabled, Windows will not see the device.
  6. Confirm physical and software routing: try the rear panel jacks and/or front headphone jack, test speakers with another source, and try a known-good cable. If a digital output (S/PDIF) is set as default, analog speakers will be silent—change the default playback device in the audio control panel.
  7. As a fallback, a cheap USB audio adapter will provide immediate sound if onboard audio cannot be restored.

Create a restore point before driver or BIOS changes. If vendor drivers are unavailable, seek the PC model support page on the manufacturer site and install the exact audio and chipset packages intended for the OS/service-pack level.

Recommended Answers

All 2 Replies

Member Avatar for zeroth

sounds like you need to download the sound card drivers from the Sony webpage...

Member Avatar for tomgreag

You can repair your speakers if any problem in your speaker and if there is no problem in your speaker than you have to check out your system.

Be a part of the DaniWeb community

We're a friendly, industry-focused community of developers, IT pros, digital marketers, and technology enthusiasts meeting, networking, learning, and sharing knowledge.