Member Avatar for ferret_90

http://www.newegg.com/Product/Product.aspx?Item=N82E16815100015&nm_mc=OTC-pr1c3watch&cm_mmc=OTC-pr1c3watch-_-Video+Devices+++TV+Tuners-_-AVerMedia-_-15100015
It requires an 8 pin power connector onto the card. It has a 8 to 10 pin adapter. (see photo on site)

How and where do i connect this to the power supply?

  • 2 Contributors
  • 2 Replies
  • 111 Views
  • 4 Days Discussion Span
  • Latest Post Latest Post by ferret_90

Dani AI

Generated

discovered the card is a vendor A/V bridge, so it needs auxiliary power from the PSU like many add-in cards. Below is a focused, practical checklist for identifying and connecting the correct cable, plus safety and troubleshooting notes that fill the gaps from the thread.

First, power down and unplug the PC. Open the case and look for cables labeled "PCI-E" (or printed on the cable sleeve). A proper GPU/PCIe power lead is a keyed 6-pin or 6+2-pin connector that clips to the card. If you find a 6+2 cable, combine the two pieces into an 8-pin and seat it until the latch clicks. Route the cable so it is not under tension and keep it away from fans and sharp edges.

If the PSU has no PCIe cable, avoid relying on cheap adapters as a long‑term fix. Molex-to-PCIe adapters or forcing mismatched plugs can overload small wires or contacts and cause heat/failure. Better options are: obtain a correct cable from the PSU manufacturer (or a compatible modular cable if your PSU is modular), or upgrade to a PSU with native PCIe connectors. Check the card’s power draw and the PSU’s +12V capability before powering up; PCIe connector power specifications are documented here (PCI Express power section) and ATX connector info is here (ATX power connectors) for reference.

Quick troubleshooting: confirm the connector is fully seated and latched, test with minimum extra devices connected, and watch for unusual smells or shutdowns on first power-up. If the card uses an unfamiliar multi-pin vendor plug rather than a standard PCIe socket, consult the card manual or the vendor support for the exact wiring before attempting any adapter.

Recommended Answers

All 2 Replies

Member Avatar for sittas87

cant access your link

Member Avatar for ferret_90

nvm, i called hauppage and they said it was an A/V bridge for multiple tuners

Be a part of the DaniWeb community

We're a friendly, industry-focused community of developers, IT pros, digital marketers, and technology enthusiasts meeting, networking, learning, and sharing knowledge.