Member Avatar for Member #23858

I just got done building two computers using the C2D 6400. I used the Asus P5B-E and was not overly impressed. I hated the bios and its looks. It had a problem with any overclocking at all and some of it's own software messed it up. Anyone care to lead me to another board that you would recommend?

  • 1 Contributor
  • 3 Replies
  • 79 Views
  • 5 Days Discussion Span
  • Latest Post Latest Post by Member #23858

Dani AI

Generated

raised the right choices for a Conroe-based build. Short answer: if the primary goal is easy, high-stability overclocking, the Abit AW9D-MAX was the community favorite in that era; if the priority is a feature-rich, recovery-friendly board with good stock stability, the Gigabyte DQ6 is a solid pick; Intel 975X boards tend to be conservative and rock-solid but less flexible for tuning. Those tradeoffs explain why different builders recommended different boards.

Practical checklist to decide and to get a safe overclock with an E6400:

  1. Update the board to the latest BIOS before tuning.
  2. Run memory at SPD/default while testing FSB; increase FSB in small steps (10–20 MHz), test each step with Memtest86+ and Prime95 (blend) for stability, and monitor temps.
  3. Raise Vcore only when needed and in small increments. Watch VRM temperatures and ensure good case airflow; a weak PSU or hot VRMs are common failure points.
  4. Prefer boards that expose fine-grain Vcore and FSB controls in BIOS and offer robust BIOS recovery (Gigabyte DualBIOS or equivalent).
  5. Avoid relying on vendor Windows utilities for serious overclocking — use the BIOS and established stress tools instead.

When choosing between DQ6 and AW9D-MAX, look at real-user threads for VRM longevity, BIOS voltage resolution, PCIe/slot layout for cooling and multi-GPU use, and which SATA/AHCI drivers suit the OS you will run. If keeping the P5B-E, try a BIOS update, clear CMOS, and disable the vendor utilities before concluding the board is unusable.

Member Avatar for Member #23858

Anyone know about this board form intel?
975XBX2KR 975X 775 ATX Motherboard

Member Avatar for Member #23858

I have narrowed it down to the gigabyte DQ6 or the Abit AW9D-Max. Any info that you know about either of these boards would be appreciated. Thanks

Member Avatar for Member #23858

I can't find anyone on here that has used the DQ6. Anyone care to advise.

Be a part of the DaniWeb community

We're a friendly, industry-focused community of developers, IT pros, digital marketers, and technology enthusiasts meeting, networking, learning, and sharing knowledge.