Member Avatar for spazzbecker

Hi Guys and Gals!!
I'm looking at purchasing an MAC G4 800 MHZ here in the USA the thing is I'm moving to the UK in September will this work with 240V @ 50hz when USA is 110V @60hz ?
I think it will work with just a new power cord am I correct?

Thanks

Carl

  • 5 Contributors
  • 5 Replies
  • 220 Views
  • 6 Years Discussion Span
  • Latest Post Latest Post by siena547

Dani AI

Generated

Short answer: most iMacs will run on UK mains—Apple’s desktop specs for current iMacs list a 100–240V, 50–60Hz input—so a US-bought iMac usually only needs the correct UK mains lead or plug arrangement to work. (support.apple.com)

Practical checklist (quick verification and safe steps):

  • Identify the exact model/serial (About This Mac or the underside/regulatory label) and look up its tech specs. Identify your iMac model.
  • Locate the electrical rating printed on the case or power brick. If it shows 100–240V, 50–60Hz the internal supply is universal. iMac technical specifications.
  • Check the mains connector: if the cord is detachable, buy a UK replacement cable that fits the same inlet (or an Apple/authorized replacement). If the cord is fixed, use a certified fused UK adapter or have a qualified technician replace the lead—avoid cheap, loose adapters. (Apple community threads discuss using a UK IEC lead for iMacs.) (support.apple.com)

Warranty and service note: as and observed, warranty/service across countries can be limited or handled differently. Apple’s one‑year limited warranty and international service options vary by country; service, parts availability, shipping and taxes may apply. Check the product’s coverage via Apple’s warranty pages or the Check Coverage tool before relying on local warranty help. (apple.com)

Bottom line tied to the thread: was on the right track pointing to Apple specs, and ’s warranty caution is valid. For the later 24" Intel/Core2Duo example from the same checks apply—confirm the model rating, get a proper UK cord (or Apple replacement), keep the serial/proof of purchase, and test on arrival.

Recommended Answers

All 5 Replies

Member Avatar for kc0arf

Hello,

According to Apple's website:

Suggests that power requirements are auto-sensing from 120 - 240 Volts. Frequency is 50 - 60.

What is the specific model of iMac that you have? I would look a little deeper to be sure.

Christian

Member Avatar for spazzbecker

Hello,

According to Apple's website:

Suggests that power requirements are auto-sensing from 120 - 240 Volts. Frequency is 50 - 60.

What is the specific model of iMac that you have? I would look a little deeper to be sure.

Christian

Hi Christian
I'm looking at getting a iMac with a 1.25 GHz processor, 256MB of ram and an 80 GB hard drive

Thanks
Carl

Member Avatar for davebw@ntlworld

that will work ok but if u have any warrenty on it, it prob will not count in the uk.

DAVE

Member Avatar for alc6379

that will work ok but if u have any warrenty on it, it prob will not count in the uk.

DAVE

Excellent point.

I know that some companies have some funny things with their warranties. You buy the thing in America, your warranty's from America, but then you have to call the local tech support for issues, who directs you back to America... wash rinse repeat.

Personally, I'd just forget the thing had a warranty if I were moving out of the country.

Member Avatar for siena547

hi i have just bought me a used 24" iMac 2.8 GHz Intel Core 2 Duo 4GB 800MHz Ram from a dude in HOLLYWOOD USA and i didnt think to check if it will work in ENGLAND !! OOoop's....Can anyone help me and put my mind at rest ???

Be a part of the DaniWeb community

We're a friendly, industry-focused community of developers, IT pros, digital marketers, and technology enthusiasts meeting, networking, learning, and sharing knowledge.