Maplestory 0 Light Poster

I Have Got A Idea... If You Have A Router, Connect The Ethernet Cable From Your Computer To Your Router... Then Go To The Website : http://192.168.1.1 ... They Would Ask For The Username And The Password.. The Username Is : admin And The Password Is : admin

See This Whole Sentence To Make A Name For You Linksys Router...

Then You Go To (Wireless) Then Below The Big Boxes , There Are Small Words... Click On Basic Wireless Settings... Soon They Will Ask Your Wireless Network Mode.... You Would Have To Check Your Router.... Example(Linksys Router) : Wireless-G... Please Check On Your Router For The Example Give On Top...

The Wireless Network Name I(SSID) : Example(Your Wireless Network Name) : (E.G.) Linksys.... The Wireless Channel Should Be ::: 6-2.437GHz...

They Would Ask For You SSID Broadcast.. Please Enable It...

I Have Got A Idea... If You Have A Router, Connect The Ethernet Cable From Your Computer To Your Router... Then Go To The Website : http://192.168.1.1 They Would Ask For The Username: The Username Is : admin And The Password Is : admin

See This Whole Sentence If You Want To Have A Password On Your Router...

Click On The Word In The Big Box::: Wireless.. When You Have Clicked On It , Click On The Small Box Below It::: Wireless Security....

They Will Ask For Security Mode ::: You Should Chose This So That All Wifi Devices Could Use Your Internet On Your Router. :: Chose This :: WPA Pre-Shared Key...

Then They Would Ask For The WPA Algorithms: I Suggest You Should Chose This : TKIP

They Will Then Ask For The WPA Shared Key : Your WPA Shared Key Is Your Password For Your Router.....

They Would Ask For The Group Key Renewal : You Should Put ::: 3600 seconds

Please Check If You Have DMZ , If You Do Not Have , It's Okay... If You Want To Check If You Have DMZ On Your Router , You Should See Your Router If You Have The Word DMZ There..... This DMZ Is A Protective Security.. If The DMZ Got The Virus That You Went On The Website, The Virus WIll Not Be Send...

Read This Whole Passage If You Have DMZ On Your Router...

If You Have DMZ Go To The Following Page : http://192.168.1.1

Then Go To Applications & Gaming In The Big Box.... Please Press The Small Word Saying : DMZ...

First There Is Enable And Disable.. You Should Put Enable...

They Would Ask For The DMZ Host IP Adress.. You Should Put.. 192.168.1.1 ::: Pls Do Not Copy The Whole Thing But Copy The Last Number Given...

Please Note That If There Is Any Mistakes Please Paste On The Post.. I Will Copy Again...


If You Have Got Any Ploblems , Go To The Back Of Your Router, You Should Find A Reset Word With A Hole.. Pock A Pen In The Small Hole And Wait For The WLAN Light To Off And On..