Member Avatar for thewebhostingdi

Some of keys of my TVSE gold keyboard get stuck. One of my friend suggest me to deep the keyboard in water for 3 to 4 hours and then let it be dry in sunlight for 1 full day.

I want to confirm, how safe this trick is?

  • 3 Contributors
  • 2 Replies
  • 196 Views
  • 15 Hours Discussion Span
  • Latest Post Latest Post by caperjack

Dani AI

Generated

For sticky keys on a desktop keyboard (like the TVS/TVSE Gold mentioned by ) do not dunk the whole unit in water — submerging or spraying freely risks corrosion, trapped moisture and ruined electronics. Short targeted cleaning is the safer route; the manufacturers and repair guides warn against soaking and against letting liquids seep into the case. (support.logi.com)

A practical, low-risk workflow: power off and unplug; take a photo of the layout; gently remove only the affected keycaps with a keycap puller; set the caps aside to wash in warm soapy water and dry thoroughly. Blow out the switch wells with short bursts of compressed air, then clean sticky residue around the stems with a lint‑free cloth or cotton swab lightly dampened with isopropyl alcohol (use sparingly). Reassemble only after everything is bone-dry (see next paragraph for drying). Detailed teardown and keycap-wash methods are described in keyboard-cleaning guides. (ifixit.com)

If the keyboard is non‑removable (laptop style) or you’re uncomfortable opening it, follow a gentler approach: power down, tilt, and use compressed air in short bursts, then wipe surfaces with a barely‑damp microfiber cloth (isopropyl alcohol) rather than spraying. Avoid household oils or WD‑40 multi‑use sprays — they leave residues and attract dirt. If contact cleaner is needed, use a purpose-made, no‑residue electronics contact cleaner and test plastics first. (Target the problem keys rather than soaking everything, as and suggested.) (wd40.com)

Dry thoroughly out of direct sunlight and heat — allow parts to air for 24–48 hours in a ventilated spot before reconnecting. If keys remain sticky after careful cleaning the switch or membrane may be damaged and replacement or a new keyboard will often be the least costly, most reliable fix. Prevent future problems by avoiding eating over the keyboard, using a thin silicon cover, and using compressed air regularly. (lifewire.com)

Recommended Answers

All 2 Replies

Member Avatar for finito

rofl, don't do that.

Get a WD-40 to loosed the Keys or use a screwdriver to take out the keys that are stuck.

You can also use oil of any kind but you will end up with a sticky mess.

Member Avatar for caperjack

as finito says ,working with only the stuck keys ,no need to subject the othere keys to unecessary cleaning , Water !no no

Be a part of the DaniWeb community

We're a friendly, industry-focused community of developers, IT pros, digital marketers, and technology enthusiasts meeting, networking, learning, and sharing knowledge.