Member Avatar for paulchristensen919

over heating

  • 3 Contributors
  • 2 Replies
  • 63 Views
  • 1 Week Discussion Span
  • Latest Post Latest Post by ocdpcfix.com

Dani AI

Generated

Good catch, . and are on the right track — many dv6000s show overheating or video-subsystem symptoms, but a few targeted checks will distinguish a cheap cooling fix from a board-level video failure.

Quick diagnostics:

  • Observe when the fault appears: at boot, during light use, or only under heavy load? Note whether the machine shuts down, shows visual artifacts, or just slows (throttles).
  • Test an external monitor. If the external output is clean while the internal screen fails, suspect the panel or its cable; identical failures on both screens point at the GPU/video subsystem.
  • Boot outside Windows (BIOS self-test, HP pre-boot diagnostics if available, or a Linux live-USB). Artifacts that appear before Windows drivers load indicate hardware.
  • Check Event Viewer for display-driver resets and record the adapter/driver name.
  • Monitor temperatures and clock speeds with a sensor tool (HWMonitor/Speccy). Rapid temp rise plus falling clocks = thermal throttling.
  • Try software-first: clean drivers (use a safe-mode cleaner like DDU), then install HP-supplied chipset and video drivers and any HP BIOS updates. As a temporary triage, lowering the maximum processor state in Windows power options reduces heat.

If diagnostics point to hardware, start with cleaning the fan, replacing thermal paste, and checking the heatsink/fan assembly. Board-level repairs (reflow/reball or motherboard swap) can be expensive and sometimes temporary; have those done by a professional. Back up important data before testing, and use anti-static precautions when opening the case. Recording the exact dv6000 model number (sticker on the underside) and precise symptoms makes it possible to identify the right replacement parts or next steps.

Recommended Answers

All 2 Replies

Member Avatar for caperjack

known issue for this model laptop ,its caused by the video chip soldered to the motherboard ,it can be fix if you can find someone who knows how .
check www.google.com

Member Avatar for ocdpcfix.com

hello,

If you blow some air into the fan to get the dust out (from the outside) using an air duster product, it may help a bit. Best thing will be to take the laptop apart and clean all the dust. If this does not help. sometimes adding newer thermal compound between the CPU and heaksink may help. You may have to take it to a computer shop. If it is an issue with the video chip, it gets more complicated and expensive. Hope this helps.

Edited by Dani because: Plug snipped
Be a part of the DaniWeb community

We're a friendly, industry-focused community of developers, IT pros, digital marketers, and technology enthusiasts meeting, networking, learning, and sharing knowledge.