Can somebody tell me if this video card (PNY Nvidia GeForce 7600GS 512MB 128-bit GDDR2 AGP 4X/8X Video Card) can support 1440x900 resolution? Any help would be much appreciated. Thanks


My System:

Sempron 2800+ 1.6ghz(overclocked to 1.76)
ECS K8M800-M2 (version 1.0)
Via/S3G Unichrome Pro IGP(version )
250gb Hard Drive
400watt power supply

Dani AI

Generated

Short answer: yes — a GeForce 7600 GS AGP will handle 1440×900. That resolution is well within the capabilities of a GeForce 7-series GPU and is below the single‑link DVI/VGA limits most cards of that era support.

Why some people see only 1280×1024 (referencing ): that’s usually not a GPU capability problem but a driver/monitor/connection issue. Common causes are Windows using a generic VGA driver, the monitor’s EDID being read incorrectly, or using a cable/adapter that limits the available modes. Also note 1440×900 is a 16:10 widescreen mode — an older 4:3 or 5:4 monitor won’t advertise it.

Practical checklist to get 1440×900:

  • Verify the monitor’s native modes (manual or model spec).
  • Fit the card and connect via DVI or a proper VGA cable (avoid passive adapters that can force odd behavior).
  • Install the correct NVIDIA driver for the 7600GS (the driver enables the card to read monitor EDID and expose widescreen modes).
  • If the OS still only shows 1280×1024, use the NVIDIA Control Panel (Change Resolution → Customize → Create Custom Resolution) or an EDID/utility tool to add 1440×900.
  • If problems persist, test the card in another PC to rule out a faulty card or a motherboard/AGP-keying issue.

A final note: a system PSU around 400W is typically sufficient for a low‑power 7600GS, and AGP cards rarely need extra power connectors. Given ’s “lots of problems” comment, driver conflicts or a flaky card are the most likely culprits rather than an inherent resolution limit.

Nope, I dont think so, the highest mine can support is 1280 by 1024, any ways, i wouldnt get the card, mine has a lot of problems

Cần bán Card màn hình GeForce 7600GS, 512MB


Card máy đang dùng. Cần bán để mua lattop. Giá để em nó ra đi là 1tr500(fix)(đang còn hàng).
Giao dịch trực tiếp tại TP.HCM. Liên hệ:
Điện thoại: 01682047905
Yahoo:

Be a part of the DaniWeb community

We're a friendly, industry-focused community of developers, IT pros, digital marketers, and technology enthusiasts meeting, networking, learning, and sharing knowledge.