I have a IBM T22 that was working fine, then one day, the lights come on, but nobody is home. the screen, nothing boots up.

sound like anything anyone knows?

Dani AI

Generated

For 's T22 that shows power LEDs but never gets to video or a boot screen, 's point about listening for POST signals and 's experience with a failed drive are both relevant. Those two leads help narrow the fault, but a quick, ordered check will separate a simple user-serviceable issue from a board-level failure.

Recommended quick checks and isolation steps:

  1. Confirm the adapter and battery: verify the power brick LED and, if possible, measure output with a multimeter. Test with AC only (battery out) if a spare adapter is available.
  2. Do a power/EC drain: remove battery and AC, hold the power button 30 seconds, then connect AC only and try powering up.
  3. Memory: remove SODIMMs, clean contacts, then try one module in the primary slot. Faulty or poorly seated RAM often stops POST.
  4. Display vs POST: connect an external monitor (VGA) and also shine a bright light at the LCD to look for a faint image. External video or a faint picture points to backlight/inverter or lid cable problems.
  5. Storage isolation: remove the hard drive and power on. If the BIOS/POST appears without the drive, the drive or its controller/MBR is implicated. If nothing changes, the HDD is unlikely to be the root cause.
  6. Observe fan, LED blink patterns and any beeps; document them. No fan/spindle spin plus LEDs often means DC rail or motherboard faults.

If these steps do not produce POST or any diagnostics, the problem is likely motherboard/DC-jack/EC related and needs board-level repair or a replacement unit. Handle modules with ESD care and consider professional service if unsure.

Recommended Answers

All 2 Replies

Do you hear any beeps?

Try a different hard drive. I recieved a T22 for christmas and a few months after my hard drive failed and made the machine do all sorts of weird things. But IBM was quick and had a new drive to me in a few days (machine was still under warrenty).

Be a part of the DaniWeb community

We're a friendly, industry-focused community of developers, IT pros, digital marketers, and technology enthusiasts meeting, networking, learning, and sharing knowledge.