0

Hello, since i am a rookie in the field would you please help me out on this:
I need to connect the routers as described on the picture bellow (ports with question marks)
What IP's they should get so that they connect each other and be able to send and receive packets to / from others networks
Thanks!

[IMG=http://img300.imageshack.us/img300/4261/netxg5.th.jpg]

1
Contributor
1
Reply
2
Views
8 Years
Discussion Span
Last Post by BadGad
0

ok, obviously I need to add some details.
I was thinking to assign 172.16.0.0 - 172.31.255.255 (172.16/12 prefix) (RFC1918) which gives me 16 supernets 1048574 addresses each with but would this causes me any trobles in the future?
for example:
R1-172.16.4.1
R2-172.16.8.1
R2-172.16.12.1
so that I can add hosts to each of those three new nets
And if I add the default route 172.16.0.0 in the route table would this work in this way?
I haven't tried to implement supernets so far
or it will be more beneficiall if I just set defaul class c addresses like
R1 - 192.168.0.1 and 192.168.1.1
R2 - 192.168.0.2
R3 - 192.168.1.2

I just cannot figure it out how the route table would look like in this way

Thanks

This topic has been dead for over six months. Start a new discussion instead.
Have something to contribute to this discussion? Please be thoughtful, detailed and courteous, and be sure to adhere to our posting rules.