Member Avatar for Kufre19

Pls guys how do i fix my u8799 mother i wrongly placed the ram in it then it sparked now the gpu, keyboard and other components are working but it coming up and the cooling fan is working so please help me out

  • 2 Contributors
  • 1 Reply
  • 468 Views
  • 27 Minutes Discussion Span
  • Latest Post Latest Post by rproffitt

Dani AI

Generated

A few practical steps for to narrow this down, and some context following ’s earlier comment.

  1. Safety first — unplug the PSU and don’t power the board again if you see burn marks, melted plastic, or smell scorching. A brief visual inspection with good light and a magnifier can reveal charred pins, cracked components, or bulging capacitors; if any are present, stop and seek a bench tech.
  2. Minimal-boot test — with power removed, strip the system to CPU + one known-good RAM stick in the correct primary slot, no drives or extras and no add-in cards. Try each memory slot one stick at a time. If you getPOST beeps or video with the minimal config that isolates a damaged slot or card.
  3. PSU and basic volt check — if you can measure safely, confirm the PSU rails (5VSB, +12V, +5V, +3.3V) or try a known-good PSU. Many “powers on but no POST” problems come from weak/failed rails or a shorted power regulator. Only do multimeter checks if comfortable with mains/PSU work.
  4. CMOS reset and speaker/beep codes — clear CMOS and attach a case speaker to listen for POST codes; that helps identify CPU vs memory vs video faults.
  5. What it likely means and next steps — a spark during seating often causes a local short: a damaged DIMM slot, a burnt trace, or a failed VRM component. Those can be repaired by a skilled board technician but are frequently more expensive than replacing an old board; salvaging CPU/RAM/GPU may be the most cost‑effective option.

If unsure at any point or if you see physical damage, stop and get a repair shop to avoid further harm. As implied, compare repair time/cost against replacing the board or finding a donor.

Member Avatar for rproffitt

That appears to be a really old Socket 478 (Pentium 4 or Celeron) board. No schematic was issued for these so you rarely can repair them. The only good news is such is usually cheap on Ebay. At least here.

The spark usually means the tech forgot to remove power from the PSU before working on the machine. They usually lose one board before they learn that lesson.

Be a part of the DaniWeb community

We're a friendly, industry-focused community of developers, IT pros, digital marketers, and technology enthusiasts meeting, networking, learning, and sharing knowledge.