Member Avatar for tech291083

hi,

just came across this memory on ebuyer and looks like the fastest memory on planet.

http://www.ebuyer.com/customer/products/index.html?rb=23310872097&action=c2hvd19wcm9kdWN0X3NwZWNpZmljYXRpb25z&product_uid=108445

OCZ PC2-8000 DDR II-1000 GOLD EDITION XTC

but can't find a suitable m'board for it. can any one suggest any? the problem has to do with the mhz of the memory which is 1000 MHz and not many m'board support it. thanks.

  • 2 Contributors
  • 2 Replies
  • 109 Views
  • 1 Week Discussion Span
  • Latest Post Latest Post by tech291083

Dani AI

Generated

High-speed DDR2 modules sold at a 1000 MHz rating were an overclock profile in the LGA775 era rather than a universally guaranteed speed. The key to success is a motherboard with flexible memory dividers, explicit DRAM voltage control and good BIOS memory tweaking options. As pointed toward, an enthusiast/overclocking board is the correct direction when pairing this sort of memory.

Practical setup checklist:

  • Update the motherboard BIOS to the newest stable revision before testing.
  • Check the board manual and its QVL (Qualified Vendor List) for any similar modules or supported high-speed settings.
  • Set DRAM voltage to the module’s rated value (check the stick or vendor spec) and enter the vendor-specified timings manually rather than relying on SPD.
  • Start with one DIMM in the recommended slot and try to POST; if successful, run memtest86 (or memtest86+) for several passes to verify stability.
  • If it fails to POST or is unstable, reduce the memory frequency to the next stable setting, loosen timings, or increase voltage in small safe increments; clear CMOS between major changes and retest. Also test each stick individually to rule out a defective module.

When choosing a motherboard, prioritize strong BIOS memory controls, documented user reports of running high DDR2 speeds, and a QVL that matches your modules or vendor family. Expect to tweak settings—CPU, board and DIMM tolerances all matter—and remember that running memory at OC-rated speeds can affect stability, heat and warranty coverage. The OP reported success after using an enthusiast board and adjusting BIOS settings accordingly.

Recommended Answers

All 2 Replies

Member Avatar for reezin14

The ASUS P5W DH Deluxe is a great board I'm sure that could handle the RAM. Take look around the NET.

Member Avatar for tech291083

thanks mate, it helped.

Be a part of the DaniWeb community

We're a friendly, industry-focused community of developers, IT pros, digital marketers, and technology enthusiasts meeting, networking, learning, and sharing knowledge.