Member Avatar for bossy marmalade

well recently formated my harddrive and installed windows xp again. before the format whenever i connected my xbox to my pc via eathernet cable a little icon called lan would pop up and i would connect no problem. now i get no icon and when i try to set up a small office network (i think thats what i went to last time) to setup a new connection i go through a little wizard but nothing happens after i click finish my pc just wont reconize my xbox even wmp11 cant detect my 360 i really want to get back on xbox live please help

  • 1 Contributor
  • 3 Replies
  • 124 Views
  • 20 Hours Discussion Span
  • Latest Post Latest Post by bossy marmalade

Dani AI

Generated

— concise troubleshooting checklist and practical fixes to get a PC and a console to see each other over Ethernet.

First, verify the basics you can see and test right away: confirm the Ethernet cable and the NIC link lights on both ends (blinking or steady indicates a physical link). If you have an old crossover cable or an unfamiliar cable, swap it for a known-good straight-through patch cable or try the cable in another device. Check Device Manager (or the OS equivalent) to make sure the network adapter is present and has no error icons; update/reinstall the driver if it looks broken.

Next, confirm addressing and reachability. On the PC run ipconfig /all and note the Ethernet adapter entry. If sharing a connection manually, put the PC at 192.168.0.1 and the console at 192.168.0.2 (mask 255.255.255.0); then test with ping 192.168.0.2 from the PC and ping 192.168.0.1 from the console (or from the PC to the console if the console UI permits). If using the operating system’s Internet Connection Sharing, make sure it’s enabled on the internet-facing adapter and that the Ethernet adapter is the shared interface.

Third, temporarily disable any third-party firewall and Windows firewall for testing. If disabling the firewall makes the link work, re-enable it and add rules or an exception for the console/network. If you’re trying to share an Internet connection, a router between devices will simplify things and avoid many ICS/firewall headaches.

If those steps don’t reveal the problem: reinstall the NIC driver, try a different Ethernet port or a USB-to-Ethernet adapter, and capture results of ipconfig /all and a successful/failed ping to post (IP addresses redacted if desired). These diagnostics make it clear whether the issue is physical, addressing, or blocked by software.

Member Avatar for bossy marmalade

i forgot to mention i use comodo firewall and i since i just reinstalled xp service pack one

Member Avatar for bossy marmalade

nevermind its sp2

Member Avatar for bossy marmalade

help me anyone please

Be a part of the DaniWeb community

We're a friendly, industry-focused community of developers, IT pros, digital marketers, and technology enthusiasts meeting, networking, learning, and sharing knowledge.