Member Avatar for shahrooz63

roland drivers windows vista free download cx-24

  • 3 Contributors
  • 2 Replies
  • 128 Views
  • 1 Month Discussion Span
  • Latest Post Latest Post by Ancient Dragon

Dani AI

Generated

Both posts in this thread are about older Roland hardware, so the first step is to confirm the exact model and how it connects to the PC. mentioned a CX-24 and a CM-12 — those are different product lines and need different driver packages. Instead of a generic search, use the exact model string from the machine's label and include the OS (for example: "CM-12 Windows Vista driver") when searching.

Start with the manufacturer's support resources (Roland DG / Roland DGA depending on your region). If no Vista driver is listed, download the latest Windows XP driver and install it in compatibility mode: right-click the installer → Properties → Compatibility → choose Windows XP (SP2 or SP3), apply, then right-click and Run as administrator. If the installer extracts files, use Device Manager -> right-click the device -> Update Driver -> Browse my computer -> Let me pick -> Have Disk and point to the extracted INF.

Connection type matters. Many older plotters use RS-232 (serial) or parallel ports rather than native USB. USB-to-serial adapters can work if they use a well-supported chipset (FTDI, Prolific, Silicon Labs) and you install that adapter's driver first. Parallel-to-USB "printer cables" often fail for plotters; a real parallel port (or PCI card) is more reliable. If the device shows as unknown in Device Manager, note the COM port and use the manual driver-install route described above.

Vista x64 requires signed drivers and may block unsigned legacy drivers. A temporary approach is to enable test signing, install the driver, then disable it (use these commands in an elevated prompt with caution):

bcdedit /set testsigning on
bcdedit /set testsigning off

If nothing works, consider running an XP virtual machine and passing through the USB/serial device to install legacy drivers there, or contact Roland support for archived drivers. Avoid random third-party driver sites — they often bundle unwanted software.

Recommended Answers

All 2 Replies

Member Avatar for craigWA

I need a driver for my Roland cm 12 plotter.

Be a part of the DaniWeb community

We're a friendly, industry-focused community of developers, IT pros, digital marketers, and technology enthusiasts meeting, networking, learning, and sharing knowledge.