'll make it simple,
I have locations in different cities, connected using 2 Cisco ASA devices.
my main location, corporate, use the IP 192.168.1.x The second location, remote store, use the IP 192.168.3.x
I have a DHCP server (192.168.1.254) at my corporate location. I have created a scope for the 192.168.1.x which works fine for the corporate location.
I created a scope for the remote location (192.168.3.x) on my DHCP server and tried to configure the remote ASA DCHP Relay,
on the remote ASA: I disabled the DHCP Server on the inside. I enabled DHCP Relay on the inside, with set route set at yes.
I set the Global DHCP Relay Servers, specify up to four servers to which DHCP requests would be relayed. I added my DHCP, 192.168.1.254
I flashed these settings to the ASA and gave it a try, didn't do anything.
am i missing something - forgetting something. not really sure what im doing wrong.