HELP!
WGR614 < hard wire >( AP1) WG302 ***>>wireless ***>> (AP3)WG602 & (AP2)WG302 ***>>wireless ***>>(AP4)WG602
In pictures it is easier to see. I have posted same on the web if hekpful www.wpraaca.com/needshelp.doc
Regardless what the above is 'supposed' to represent is a network with two paths Internet to router 614 then by wire to ap1 then wireless to ap3 the other path is Internet to router 614 then by wire to ap1 then wireless to ap2 then wireless to 1p4. Hope that didn't make it more confusing.
This network was working GREAT until just recently now ONLY connects to internet from PCs wired to WGR614 or wireless to WGR614 Unable to connect any Wireless units to internet via any AP. All APs are currently set to ‘Repeater Mode with appropriate MAC Associations. Also All are set to same SSID and Channel
All APs are set with static IPs used for passed several years 192.168.0.226 - 229, WGR614 192.168.0.1. Subnet Mask 255.255.255.0 DHCP Pool from WGR614 192.168.0.2 – 200
WG602 AP Firmware ver. 3.2 RC^ and WG302AP Firmware ver. 2.04 RC8 – Are my APs set in the correct mode or ….. Any and all assistance will be greatly appreciated.