Member Avatar for drjsmooth

I need AGP Video Card for my Hp Desktop, Slot 8x/4x for an old Hp that runs flawless. I'll be using a new Viewsonic Monitor #VX2235WM, The Monitor has both VGA and DVI Ports. Will not be used for games. I just make movies and surf the net with it.

Other info on my computer: Motherboard is Kelut #A7V8X-LA, AMD XP3000, 2.10Ghz, Max out memory @ 2 Gigs.

Any suggestions would be appreciated, Thank you.

  • 3 Contributors
  • 2 Replies
  • 231 Views
  • 13 Hours Discussion Span
  • Latest Post Latest Post by OlyComputers

Dani AI

Generated

Quick, practical checklist for an AGP upgrade on your HP with the Kelut A7V8X-LA (AMD XP3000). The A7V8X boards use a keyed AGP slot and require +1.5V AGP cards (they support AGP 8x/4x), so only buy a 1.5V-compatible AGP card — 3.3V-only cards will not fit or work. (manualzilla.com)

Pick a card with a DVI output if you want to use the ViewSonic’s DVI input for the cleanest signal. Note the difference between DVI-I and DVI-D: DVI-I carries analog (VGA) and digital, so a simple passive adapter can give VGA; DVI-D is digital-only and cannot be passively converted to VGA. If you plan to use the monitor’s DVI input, any digital DVI output on the card will be fine. (nvidia.custhelp.com)

Power and physical fit are the usual gotchas in older OEM boxes. Many older AGP cards drew extra power or used AGP Pro variants; check the card’s power draw and avoid models that require extra onboard connectors if the HP PSU is original or low-wattage. Measure or note your PSU’s wattage and clearance inside the case before buying. (en.wikipedia.org)

Installation checklist and quick troubleshooting:

  • Verify the card is +1.5V AGP before purchase.
  • Remove old video drivers, install the new card, then boot and install vendor drivers (use safe mode if display drivers hang).
  • If no POST, reseat the card, clear CMOS, and try booting with onboard video disabled.
  • Confirm the card supports the monitor’s native resolution (so you get full desktop size).
    As suggested, watch PSU capability; as asked, confirm the card can drive the monitor’s native resolution. These checks will keep the upgrade simple for movie playback and web use.

Recommended Answers

All 2 Replies

Member Avatar for OlyComputers

It depends a lot on what you mean when you say "make movies". If you're talking windows movie maker and clips of your kids birthday parties you'll be fine with about anything, but more serious video editing can be very gpu intensive.

What kind of pricerange are you looking at?

http://www.newegg.com/Product/Product.aspx?Item=N82E16814102814 is a decent card

http://www.newegg.com/Product/Product.aspx?Item=N82E16814125249 should take care of you on a budget
and

http://www.newegg.com/Product/Product.aspx?Item=N82E16814102730 is about the best perfrmance for AGP

You need to keep a eye on your power supply though, a lot of OEM systems have just enough power to run stock hardware and don't have much to spare.

Be a part of the DaniWeb community

We're a friendly, industry-focused community of developers, IT pros, digital marketers, and technology enthusiasts meeting, networking, learning, and sharing knowledge.