Member Avatar for mettinge

On my computer, i'm kinda getting annoyed because when I turn on my computer, it comes up to a screen that says the motherboard name and graphics logo. I customized every other part of the computer and want to customize this screen. I have the newest firmware to the BIOS (In case anyone is wondering). Does anyone know how to change that screen?

  • 4 Contributors
  • 4 Replies
  • 84 Views
  • 1 Week Discussion Span
  • Latest Post Latest Post by mettinge

Dani AI

Generated

For : changing the motherboard splash is possible, but the safe way depends on the board and firmware. Some manufacturers provide a built‑in UEFI option or an official utility that accepts a prepared image. Other boards require editing and reflashing the firmware image, which carries recovery risk. That is what , and were warning about—do not proceed without a recovery plan.

Practical checklist before trying anything:

  • Note the exact motherboard model and current firmware version (you already did this).
  • Read the vendor manual and look in UEFI for a “Full Screen Logo” / “Boot Logo” option or vendor tools that mention logo replacement.
  • If a vendor tool exists, follow its image requirements exactly (they vary; many older tools expect a 24‑bit BMP at the board POST resolution).
  • Back up the current firmware if the tool allows, prepare a recovery USB, and ensure you have uninterrupted power during a flash.
  • If the board has a hardware recovery feature (dual BIOS, BIOS Flashback), learn how to use it first.

If there is no official method, do not flash a custom ROM unless comfortable with hardware recovery. Safer alternatives: turn off the splash to show POST messages in UEFI, or customize the operating system boot animation instead.

Recommended Answers

All 4 Replies

Member Avatar for nizzy1115

i would never change this if i were you. Something goes wrong and you need a new motherboard. Even a bad windows boot screen can cause your computer not to boot...

Member Avatar for goldeagle2005

I've noticed changing the Windows XP boot screen makes a few tabs from System properties to vabish. It's ot a good idea to change the boot screen. As for the BIOS, if you mess it up while modifying the flash rom, you could fry your 'puter.

Member Avatar for mettinge

Okay. I guess that it is a good idea to leave it alone. Thanks for your help.

Be a part of the DaniWeb community

We're a friendly, industry-focused community of developers, IT pros, digital marketers, and technology enthusiasts meeting, networking, learning, and sharing knowledge.