0

Can anybody tell me .How should i use Active Directory Users and
Computers .Kindly let me know the Idea.How should i make
New user.IF Possible Kindly send me ScreenShots .Any help would
Be highly appreciated.

4
Contributors
17
Replies
18
Views
8 Years
Discussion Span
Last Post by firoz.raj
0

That depends on what you want to do with Active Directory.

i want to add new user for internet connection .Kindly let me know the idea.Any help would be highly appreciated.

0

1st u need to know what is the use of ADUC(Active Directory Users and
Computers). Through ADUC u can add new users,groups and apply
restrictions on them .

0

1st u need to know what is the use of ADUC(Active Directory Users and
Computers). Through ADUC u can add new users,groups and apply
restrictions on them .

i simple want to add New users .so that internet be available also
in My laptop .Kindly let me know the idea.Any help would be highly
appreciated.means i simple want to add the users in the domain.
if possible kindly let me know the process .what is need to be done
in my Windows 2003 server.any help would be highly appreciated.

Edited by firoz.raj: n/a

0

For internet connection ,u donot need to create new users in domain environment. U create new users in ADUC inorder to have a domain user account which users can use to log into Domain Controller by using
their computers.

For internet connection ,simply plug an ethernet cable in the RJ 45 port of the NIC Card in ur laptop and make sure that the other end of the ethernet cable is properly plugged into a DSL Modem(Provided by ur ISP).

I hope this helps,

0

Sir,
in my computer internet is working properly.but when i simple remove the ethernet cable from lan card.and reconnect the same
ethernet cable in mylaptop.and i did change in my laptop property from internet connection.i go local area connection.right click property->internet protocol->again property->and then i click on radio button->obtain
ip address automatically .after finishing that i right click on mycomputer->click on tab computername->when i type my domain asfsteel.com in domain text box .then i got error
Kindly let me know the idea.Any help would be highly appreciated.

0

Firoz,

I am geting ur problem now, tell me 1 thing what happens when
u click on the radio button "Obtain IP address automatically"?
Do u get any error messege when u click on this radio button?

Make sure that u also click on the radio button "obtain DNS Server address automatically".

Please note once again that ur internet connection has nothing to do with ur domain.

Also tell me that what error messege do u get when u try to enter the domain name into the domain name field ?

Are u sure that in ur computer ,the TCP/IP configuration was set to dynamic?

Answer my questions 1 by 1 and hopefully ur problem will be resolved.

Edited by Frank Wallis: adding more information

0

I am geting ur problem now, tell me 1 thing what happens when
u click on the radio button "Obtain IP address automatically"?
Do u get any error messege when u click on this radio button?

I did not get any error.

Make sure that u also click on the radio button "obtain DNS Server address automatically".
I did it .

Also tell me that what error messege do u get when u try to enter the domain name into the domain name field ?
if i just right click on my computer->Properties-when i try to click
Computer Name tab.and when i click to change button.and select
radio button Domain instead of workgroup.
(a) A Domain Controller for the Domain asfsteel.com could not be contacted.
(b)Ensure that the domain name is typed correctly.
©if the name is correct,details for the troubleshooting information.

Are u sure that in ur computer ,the TCP/IP configuration was set to dynamic?
Can you tell me Sir .How should I make Tcp/ip configuration was set to dynamic ?
Kindly let me know the idea.Any help would be highly appreciated.

0

Follow these steps:

1) R.C on LAN connection icon in the taskbar----->Status----->Support Tab on the top(Do u see IP address,Default Gateway and Subnet Mask details)? Does it say after "Address Type" :Assigned by DHCP?

You should do this before joining your laptop to domain

Also tell me is ur computer already joined to domain?

0

(1) R.C On lan connection Icon in the taskbar.....->when i see
status it shows Limited or no connectivity.In activity i got send
386 packets.But in received i did not get any received byte.Kindly
let me know the idea.Any help would be highly appreciated.

Also tell me is ur computer already joined to domain?
No my laptop is not alredy joined to Domain.

Kindly let me know the idea.Any help would be highly appreciated.

0

But you said in your last post that you also have a computer on which
internet is working properly? Thats why I was asking if that computer
is also joined to domain?


Which OS do you have in your Laptop, WinXP or WinVista?

If you are geting "Limited and No Connectivity" then follow these steps:

1) R.C--->LAN Connection--->Repair. If Repair doesnot do the job then
move to step 2 and 3.

2) R.C--->LAN Connection--->Disable.
3) Click on Start--->Control Panel--->Network Connections--->R.C---->
LAN icon--->Enable.

If still your problem is not resolved ,get back to this thread.

Edited by Frank Wallis: Adding and Correcting

0

But you said in your last post that you also have a computer on which
internet is working properly? Thats why I was asking if that computer
is also joined to domain?

yes .But now i have tested internet connection on laptop.
we are using cisco 800 series router.simple i did plug
cable.into ethernet cable of laptop.But still the same issue.

Which OS do you have in your Laptop, WinXP or WinVista?
all the computer is joined with domain.except laptop.and
we are using piorated version in my laptop.meanwhile we
are using original version of windows xp.
(3) R.C--->LAN Connection--->Repair. If Repair doesnot do the job then
move to step 2 and 3.
so many times i did repair.But still the same issue.Kindly let me know the idea.Any help would be highly apprecaited.

0

Maybe you cannot use the "Obtain IP address automatically" option because the ISP wants you to access the internet service using static configuration.
But it say dynamic in a type column.Kindly let me know.when i issue arp -a at dos prompt.

C:\Documents and Settings\firoz>arp -a

Interface: 10.0.0.186 --- 0x2
Internet Address Physical Address Type
10.0.0.138 00-23-04-12-3c-f9 dynamic

C:\Documents and Settings\firoz>

Now hopefully you will be able to join your computer or laptop to domain?
Kindly let me know how should join laptop to domain.using Active directory user and computer

0

Maybe you cannot use the "Obtain IP address automatically" option because the ISP wants you to access the internet service using static configuration.
But it say dynamic.Kindly let me know.

C:\Documents and Settings\firoz>arp -a

Interface: 10.0.0.186 --- 0x2
Internet Address Physical Address Type
10.0.0.138 00-23-04-12-3c-f9 dynamic

C:\Documents and Settings\firoz>

Now hopefully you will be able to join your computer or laptop to domain?
Kindly let me know how should join laptop to domain.using Active directory user and computer

0

My computer is already joined in laptop.Additional can you tell me .How i always disconnect my computer after 4 o'clock.from internet.Kindly let me know the idea.Any help would be highly apprecaited.when time come 4 o clock after 4.1 when i tried to use internet .page says cannot display the requested page.Can you tell me please.How should i increase time length from server.Any help would be highly appreciated.so that internet should available
upto 5 o oclock.Using Aduc. Kindly let me know me the idea.Any
help would be highly appreciated.

0

i did not get answer.kindly give proper link.Kindly let me know the
idea.any help would be highly appreciated.

This topic has been dead for over six months. Start a new discussion instead.
Have something to contribute to this discussion? Please be thoughtful, detailed and courteous, and be sure to adhere to our posting rules.