HP Pavillion a1410n with Samsung SP 2004C HDD. Would like to make Seagate U6 ST380020A the master drive and Samsung the slave. Seagate jumpers set to master. Not familiar with slaving SATA drives, especially with non-SATA master. Please advise.
orlochavez
0
Newbie Poster
Recommended Answers
Jump to PostThere are no jumper settings on a sata hard drive. Just set the boot order correctly in your bios and you should be good.
All 3 Replies
Rik_
111
Nearly a Posting Maven
There are no jumper settings on a sata hard drive. Just set the boot order correctly in your bios and you should be good.
Xlphos
16
Veteran Poster
There are no jumper settings on a sata hard drive. Just set the boot order correctly in your bios and you should be good.
Rik from RCE is right.
Each SATA drive has is own cable so there is no master or slave for that cable.
Go into BIOS and set the segate drive as the second in the boot and the other drive after it; the CD/DVD drive should be first incase you need to boot from CD/DVD.
Hope this helps.
orlochavez
0
Newbie Poster
works great now. Thanks guys
Be a part of the DaniWeb community
We're a friendly, industry-focused community of developers, IT pros, digital marketers, and technology enthusiasts meeting, networking, learning, and sharing knowledge.