[cisco] Forum Topics

hi guys I need help with our homework. How do I put password in packet tracer? and also what is a AMY and AU router?? Here is the complete instructions our prof gave us when he left for a meeting. Also how do you make it max of 2 users …

What are the requirements to take the CCNA test? I've purchased the book and I'll be spending a large majority of my time studying independently. I'm wondering though, is taking a CCNA course a prerequisite to taking the test or is it just recommended? Thanks!

Hi Guys! I want to seek advice on how to deploy a Firewall Appliance side-by-side with a cisco router. The topology is like this. Cisco Router -> Firewall Appliance -> VLAN SW. I have already created a transit link between the units. The firewall appliance can see the router interface …

hi everyone I'm trying to use cisco vpn client on my new win 8.1 machine. I had installation error 27850 at first but updated DNE and was able to successfully intall it. but now I cannot connect to the vpn that I want. I receive this error: Secure VPN Connection …

 May I know that what is the ACL as shown above doing? Why do we need deny any when we are permitting the specific ip address? Isn't that ACL list has a hidden "deny all" statement? Thank you.

Well, I am making leaps and bounds in what I am learning in the area of IPSec VPN Tunnels. I do have a question, though that I hope I can get a simple answer for. I have 13 locations that I am trying to connect, which we can refer to …

I have a Cisco 4948 Catalyst switch that keeps on rebooting when console. How to prevent a Cisco Catalyst 4948 from rebooting when consoled and what are the command line that needs to be removed?, TQ

I'm new to networking and right now I was messing around in packet tracer, but I'm having trouble with the scenario I created. I will upload a couple of screenshots i've taken of my situation and I will proceed to explain my problem and what im trying to achieve. I …

Here's a fun problem for you geniuses who know SharePoint and networking. We upload videos to our SharePoint site. Regardless of the size, when we play it here at the corporate office, it will play about 20 seconds in and then reset to zero and you would have to refresh …

Quick question. I'm studying for my CCNA and my supervisor gave me this challenge question. You're given 5x Cisco 3560's and 5x Cisco 3750's which are to be installed side-by-side on a rack. Which model would you choose to avoid issues with STP? I'm currently skimming over [this](http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6406/data_sheet_c78-584733.pdf). Thanks!!

main 168.24.0.0/16 Hosts / ip Address / Subnet mask 500 100 50 20 5 2 2 2 please help me understand how

 1) How can I make sure R11 is able to get the OSPF routes of all the areas. 2) Make sure area-278 does not receive any ospf routes from other areas as well as from ASBR routes from other areas. At the same tim, area-278 should be able …

Hi guys, We already cracked my head with this problem. Hopefully someone could enlighten me. We got a UC540 unified communication here at the office. This UC got an internal flash problem on it, so my boss bought a new 8G compact flash from cisco. He then gave us this …

hi guys just wanted to ask you about the specialization that you would choose and here are the options for example: .Net, Oracle, or Cisco??? I chose Oracle a while ago and already passed the requirements and form in our university. But still I'm confused because right now it keeps …

Hi guys I just want to ask how to do this: "The distribution switch is connected by trunk links to the access switches." I included the whole Phase 2 instructions so you can better understand what I am trying to do. I've done all that's in this list already except …

hi guys I just want to ask how to add 100 laptops in a network for a certain group. I posted an attachment so you can better understand me. You'll see from the picture about the 100 laptops... thank you for those who will help out. :) 

Hello guys i'm currently having difficulties with pinging different vlans whether they are on the same switch or not. I have 3 vlans: vlan 30, vlan 40, vlan 50. I have 1 switch which I use as the VTP server and 7 switches connected to it which I use as …

Hello , i built a network topology on packet tracer a while ago using a computer that is not mine. i saved the file and now when i open it on my computer i can't see the commands that i have entered before. is there a way to show these …

How did they get the IP Addresses and subnet masks in West HQ s0/0/0 and s0/0/1, and also those in wbranch1 and wpc2 the ones with red ip addresses and subnet... please help. Here's the link to the table: http://www.scribd.com/doc/63095432/ERouting-OSPF-PT-Practice-SBA

I have spent weeks looking for a solution online but I have turned up with nothing. I am running Windows XP Professional (this has been tried on both service pack 2 and service pack 3) but every time I try to run the Cisco VPN client I get "Error 56: …

Dear Experts, we have a 2851 router which interconnect our local network to public network. we recieve our internet on interface e0/1 and e0/0 restricted to our lan as below configs int e0/0 192.168.10.1 255.255.255.0 ip nat inside int e0/1 X.X.X.226 255.255.255.224 ip nat outside ! web server ip nat …

Hi guys do you need to have a master's degree to apply for a license as a CCNA, CCNP or CCIE? just wanna know I hope you guys can help me here. Thank you and have a great day!

What is a telnet password and is it automatically type 7? If not how do I make the telnet password a type 7? Pls help I am confused with it. Thanks

We have a point to point connection going from a regional office to the main office this is provided by a Service Provider. In our office we have an ISP and what we need to prevent from happening is that if the internet drops from the ISP we could somehow …

[B][U]Settings to connect a Cisco 7960 handset running SIP firmware to SIPGATE UK[/U][/B] [B][I]Moderators: I actually came on here to post these settings on the blog I used to have on here but which seems to have disappeared, so I'm dropping this in here in the hope these settings will …

Hello, I have decided to become an IT Professional. My financial Aid counselor ask me to interview 3 IT Professionals...I don't know any IT Professionals. Please Help me with these 3 Questions. You are also welcome to contribute a short paragraph of any other information about yourself, career, job satisfaction …

Hi guys, I have a CISCO 5500 Firewall and it already has 2 networks connected: one connecting to the internet and the other one connecting my private network. I have now connected another network on one of the interfaces but I am unable to enable communication between the new network …

Hi, Since I starting dabbling in many areas of the tech world, I think I've lost some of the basic networking concepts I should already know. So I'm running into a problem: I came into a job with a network in place. After some issues, we had replaced some equipment …

I read somewhere on the net that a loopback would be appropriate but having read up on a loopback it seems to only be on one reserved IP of 127.0.0.1 The single fixed IP I have been assigned is /32, I thought this leaves me with no space for hosts? …

Dear all, I'm please to share you a GNS3 course. The videos has been uploaded to youtube. PART1 [url]http://www.youtube.com/watch?v=-GwomBC0vwc[/url] PART2 [url]http://www.youtube.com/watch?v=SWafA4SxMJw[/url] [URL="http://grook.net/forum/it-infrastructure/network/gns3-course"]GNS3 course[/URL]