Member Avatar for shraddha raut

i am having compaq presario sr1425il boot rom bios driver is currupt. M/b is Asus PTGD1-LA(Goldfish2) I don't know what to do?:(

  • 3 Contributors
  • 2 Replies
  • 127 Views
  • 1 Day Discussion Span
  • Latest Post Latest Post by coolraj003

Dani AI

Generated

Thread context: the machine is a Compaq Presario SR1425il with an Asus PTGD1-LA (Goldfish2) motherboard; reported a corrupted boot ROM and and noted basic CMOS/reset checks. If those quick checks did not restore POST, the next steps focus on obtaining and restoring the correct OEM Boot ROM and safe methods to reprogram the board.

Common, practical next steps:

  • Confirm exact system and board IDs. Record the Compaq product/serial number from the case sticker and the motherboard model/revision and the markings on the BIOS flash chip (manufacturer + part number). Clear, close-up photos of the board silk‑screen and the IC markings are exactly the information a vendor or repair shop will ask for.
  • Check the system vendor first. For OEM laptops/desktops the system maker (Compaq/HP in this case) is normally the distributor of the correct BIOS image for that system SKU. The system product number/serial is used to fetch the matching BIOS.
  • If an official image is not available, options are: obtain a dump from an identical, same‑revision board; buy a pre‑programmed replacement flash IC from a trusted supplier; or use an SPI/LPC programmer to dump and reflash the on‑board chip yourself or via a repair service.

Programmer workflow (high‑level):

  • Identify the flash chip (SOIC8/16 markings). Use an SPI programmer (common tools are CH341A + SOIC8 clip or professional programmers) to read and save the existing contents first. Always backup the dump before attempting writes.
  • Only flash an image that exactly matches board revision and chip type. Verify file integrity (checksum) where possible. Flash, verify, then test POST.

Cautions and final notes:

  • OEM BIOSes can contain vendor‑specific data (ACPI tables, SLIC/license blobs). Flashing an incorrect image often makes recovery harder.
  • If unsure, professional reprogramming or buying a pre‑programmed IC from a reputable service is safer than trial flashing.
  • If the board shows no power or no signs of life, the root cause may be elsewhere (power, VRM, damaged boot block) and a technician diagnosis is recommended.

Recommended Answers

All 2 Replies

Member Avatar for 4th&3wood

The BIOS is a set of operation instructions stored in a IC on your motherboard. If the BIOS was damaged your computer would effectively be dead. If you think that there is something not functioning properly because of a BIOS setting try clearing the CMOS by either using the jumper on the motherboard next to the battery or unplug the computer and remove the battery for about fifteen or twenty minutes. This will revert the BIOS setting to their default values.

Member Avatar for coolraj003

Yep exactly, try removing the battery and clearing up the CMOS. that would most likely solve ur problem and once its up and running you would be able to get it upgraded as well but that is after thought.

Be a part of the DaniWeb community

We're a friendly, industry-focused community of developers, IT pros, digital marketers, and technology enthusiasts meeting, networking, learning, and sharing knowledge.