Member Avatar for Member #907639

I really want to put a new video card in my computer but I have no clue where it is. HEre is a video I put:
http://www.youtube.com/watch?v=Z_J2URmAeHI

  • 2 Contributors
  • 3 Replies
  • 117 Views
  • 19 Hours Discussion Span
  • Latest Post Latest Post by caperjack

Dani AI

Generated

As already pointed out, the right next steps are verification and measurement before buying anything. For : get the exact PC model (printed on the case) and a clear photo of the power supply sticker and the motherboard area around the main expansion slot. Those three pieces of info let people give specific, safe advice.

How to inspect safely: power down, unplug, open the case, and look at the label on the PSU for total wattage and the +12V rail amperage. Note what power connectors are available (Molex, SATA, any 6/8‑pin PCIe). Measure the distance from the rear expansion bracket forward and the card height clearance above the slot. Also note the motherboard form factor (micro‑ATX, mini‑ITX, etc.) so anyone advising can confirm case and mounting compatibility.

What to look for in a candidate GPU: search for cards listed as low‑profile or small‑form‑factor and that explicitly state they need no external PCIe power. Compare the card’s physical length/height to your measured clearance. Check the card’s power draw (TDP) and compare it to the PSU label: if the slot and supply can’t safely provide the required +12V capacity, the upgrade is unsafe. Avoid Molex‑to‑6‑pin adapters unless the PSU specs clearly support the extra load.

Quick install/troubleshoot checklist: seat the card firmly in the expansion slot and screw the bracket, attach any required power leads, plug the monitor into the card (not the motherboard), then enter BIOS if the display is blank and set primary video to the PCIe device. If problems appear, remove the card and recheck power ratings, connectors, and dimensions. If the PSU or case is the limiting factor, migrating the motherboard to a larger case with a higher‑rated PSU is the reliable long‑term fix — but plan that as a small rebuild (match standoffs, front‑panel connectors, and form factor).

Recommended Answers

All 3 Replies

Member Avatar for caperjack

I really want to put a new video card in my computer but I have no clue where it is. HEre is a video I put:
http://www.youtube.com/watch?v=Z_J2URmAeHI

you don't have a video card ,you have integrated video device ,a chip built into the motheboard ,and it not likely you will be able to run much of a card anyway because of the power supply in that emachine .the black slot at the top right corner is a be a pci-E slot it would take a low profile card ,you are not going to make a gaming computer out of that tower'


also one of your parents just called and she said to tell you to clean your room .lol

Edited by caperjack because: n/a
Member Avatar for Member #907639

Could I make the powersupply bigger?

Member Avatar for caperjack

Could I make the powersupply bigger?

nope ,they don't make one ,[well maybe one with just a few more watts than your own or yours actually could be the biggest made to fit that box as i don't know the wattage of yours im only assuming] , that will fit in the box,
your option would be to buy a larger case with a more powerful power supply and move your motherboard to it ,having said that the little Acer was never intended to be a gamer.

what type of games do you intend to play/use, or is gaming actually the reason you want to add the new video card

Edited by caperjack because: n/a
Be a part of the DaniWeb community

We're a friendly, industry-focused community of developers, IT pros, digital marketers, and technology enthusiasts meeting, networking, learning, and sharing knowledge.