Member Avatar for n.cramp

Computer: Packard Bell iXtreme i5622 uk intel Core i3 processor 530, 3GB DDR3

My dad's computer has died and we have identified the motherboard to be at fault.

I'm uncertain as to which motherboard to suggest as a replacement for the above, i can find little documentation about it on the internet, and can't find any motherboards matching the above on sale online, only RAM.

Has anyone who has had to replace a motherboard for this packard bell series, or who knows which one might be close, post a suggestion? Or is this a case of - 'its broken and costly to fix, just buy a new computer'?

Nathan

  • 2 Contributors
  • 1 Reply
  • 277 Views
  • 2 Hours Discussion Span
  • Latest Post Latest Post by rubberman

Dani AI

Generated

Short summary and practical next steps.

A basic “minimal‑boot” (strip everything to CPU, one DIMM, PSU and speaker/monitor) is the standard way to confirm a dead motherboard before buying parts or a replacement system — that isolates PSU, GPU and peripheral faults. (See Intel’s troubleshooting / component‑test guidance.) (Intel: Why won’t my computer turn on?). As observed, if the machine is out of warranty and a quick test isn’t convincing, replacing the whole system is often the simplest choice.

How Packard Bell built these desktops and what to look for.

Many Packard Bell IXTREME-era desktops shipped on OEM H57-based boards; community hardware probes and CPU-Z dumps commonly show Packard Bell boards identified as H57M01 or FIH57 in similar machines. (linux-hardware probe: H57M01) (CPU-Z dump: FIH57 examples). The CPU family used in those builds is the LGA1156 generation and is supported by Intel H55/H57/P55 chipsets (so retail LGA1156 motherboards of those chipsets will work electrically). (TechPowerUp: Core i3-530 specs / chipsets).

Replacement options and gotchas.

  • Easiest: source the identical OEM board (same silkscreen part number on the PCB) or a whole donor Packard Bell — that avoids front‑panel harness and I/O bracket mismatches.
  • Alternative: a retail LGA1156 H55/H57/P55 board (micro‑ATX/ATX) will accept the CPU, but expect to adapt or rewire front‑panel cables, USB/audio/card‑reader harnesses and possibly the I/O shield; Packard Bell service manuals show manufacturer‑specific front harness panels and removal steps. (Packard Bell manual example: mainboard removal / front cables).

Recommended workflow (concise): confirm with a minimal‑boot test, photograph the motherboard silkscreens and the front‑panel harness, search used‑parts marketplaces for the exact board model, and only if that fails consider a retail LGA1156 board (budget time to rewire). If time or cost is constrained, replacing the whole PC is often the pragmatic outcome.

Member Avatar for rubberman

At this point, if it isn't under warranty, just get a new computer. Just because the mobo is bad does NOT mean other stuff isn't also, such as the PSU, CPU, etc.

Be a part of the DaniWeb community

We're a friendly, industry-focused community of developers, IT pros, digital marketers, and technology enthusiasts meeting, networking, learning, and sharing knowledge.