0

Hi All,

I bought a new system with the following configurations

Pentium D 2.66 Ghz
Intel D102 GGC2
250 GB HD(segate).
DDR2 512 MB RAM

I try to install Windows XP with SP2.....I did the partion and it copies the files after that the system Restarted and it shows the following error


TRAP 0000006 ======EXCEPTION====== tr=0028 cr0=80000011 c2=00000000

cr3=00039000 gdt limit=03FF base=0003F000 idt limit=07FF base=0003F400 cs:eip=0008:8016500C ss:esp=0010:005FBF4 errcode=0000 flags=00010097 Cy NoZr IntDis Down TrapDis eax=0005FC99 cbx=0005FFD8 eox=0000000A edx=004164D2 ds=0010 es=0010 edi=0005FD3A esi=0005FFFC ebp=0005FE1F er0=80000011 fs=0030 gs=0000

Please tell how to fix this....

Thanks

2
Contributors
1
Reply
2
Views
10 Years
Discussion Span
Last Post by Xpenetrator
0

Here's my idea:

This error seems to be related to a hardware problem:
Most sources refer to damaged start files (i.e NTLDR) or alike, some mention defective RAM chips. I believe in the start file version, it can be fixed by a Windows XP repair installation on other computers. Your computer is new and I understand you never had Windows installed before on it? Then nothing usual (pulling the plug...) could have happened to damage these files and something may be wrong with your hard disk / the HDD-cable / the controller (Mainboard).

You can download a diagnostic tool for your Seagate HDD here:
http://www.seagate.com/support/seatools/

Guess you have to burn it on a bootable CD/DVD first.

This topic has been dead for over six months. Start a new discussion instead.
Have something to contribute to this discussion? Please be thoughtful, detailed and courteous, and be sure to adhere to our posting rules.