- Strength to Increase Rep
- +0
- Strength to Decrease Rep
- -0
- Upvotes Received
- 1
- Posts with Upvotes
- 1
- Upvoting Members
- 1
- Downvotes Received
- 0
- Posts with Downvotes
- 0
- Downvoting Members
- 0
 | Installing a PowerPC G3 with OS 9.2.2 (6GB hardrive) for someone less-advantaged, but realize that the browser, in particular, presents a problem just in rendering. I've installed iCab 3, but not sure she can keep up with the updates. Question: Can this hardware run OS X (Tiger) smoothly? anybody have …  |
| | I have a Toshiba Satellite A135-S4467 that I upgraded to 2x2 gig of ram (paired set). Have run the laptop several days and now suddenly won't boot up. I've reseated the ram and removed battery, and it booted right up and worked fine. Shut it down, left it for an … |
 | I have a laptop (Sony Vaio) running Vista, which has recently received a sharp tap (with fingertips) to the surface, just in front of the touchpad. It immediately froze and now, on start up, it displays ‘Windows Error Recovery Screen’, which then loads ‘Start-up Repair’, which runs for quite some … |
 | Allo-ha, friendlies! This was a custom-built job completed at the end of last year. It had been working absolutely fine, booted up with no probs at all at least three times already today. No internal changes. The only change made was to plug a dvi-vga cable into the extra monitor-out …  |
| | Hi, I'm new in this forum. My old laptop (4 years) has developed some estrange symptoms. It turns on normally, but once it is on if I adjust the angle of the screen or move the laptop a little hard (the screen shakes) it goes black and appears to crush. … |
| | Guys 'n' Gals, A month or so ago I tried to plug my [URL="http://www.popvoucher.co.uk/cheap-sandisk-cruzer-micro-8gb-u3-readyboost-_lid-mmpcmmam.html"]USB PEN[/URL] into my Notebook (XP SP2) to download some photos. The PEN said it was being charged but the Notebook seems to have no inkling that it's connected. I can't force it to pick it up … |
| | I recently bought another video card hoping to squeeze a couple more years our of PC gaming but have since had a major system malfunctions. My current situation is that the computer does not seem to post (nothing on the monitor). I checked the video card and also the previous … |
| | I am trying to accomplish One thing and either way I will be happy. I had a HP Laserjet with No Mac OS support and every third party drive didn't work at all. So I sold the windows only LJ and just bought a Mac OS X compatible HP LJ. … |
| |
Re:
Airport Express My roommate bought an airport express before I had moved in. We now have 3 computers wireless off this router (Me and my two roommates). Recently my boss gave me his old G4 laptop and I am having a hard time connecting to the internet. My G4 shows full bars … |
| | If any one could tell me why my monitor turns off when I launch a computer game, it would be most appreciated. I have a MacMini and I have tried dumping files, launching games from the applications folder and running the game while the monitor is down to see if … |
| | I am attempting with little success to connect a G5 to a G4. I attempted to connect using a hub through the ethernet connections with no luck. Today I attempted to connect using a firewire from one to the other. With the GA booted up, I booted up the G5 … |
| | This is my first post so please be gentle with me!! I am having trouble understanding airport utilities. I have the utilities window open and it displays the router address...I would like to know where this address is from, is it internal or did my internet provider give it that … |
| | I have a g3 700 imac that hasn't been used in about a year since it died and was replaced by the intel based imac. The g3 imac will not even power up. The CRT was showing signs of degradation before the g3 quit. I wonder if it is a … |
| | If you hear timed clik cloks on your hardisk its time to say goodbye, for there is no way you can have it working again. the hardisk has crash for it cannot recover from a physical damage that has happened. you can hear timed knocking.for the hardisk cannot goback to … |
| | hey guyz i have this little problem that i cant figure out , and frankly its very irritating i was woundering of u guyz could take a look and tell me whats the problem or how to resolve the it. i built my second extreme low budget pc for lan …  |
| | i had a 512mb pc3200 ram. my uncle replaced his computer and gave me two 512 DDR pc3200. i've installed both of them in but now it only reads 1 gig of ram. i went on crucial.com and it only reads that i have 2 slots filled. and 2 slots … |
| | Hi expert please help! I have a MAC OS 10.4.8 software. Every time I insert it into my Intel laptop PC dvd drive. How come it doesn't work ? It seems like didn't recognized it why ? Is that the Operating different ? Can any Mac expert here please help … |
 | What is the Best mother board/CPU combo for Gaming? |
 | Hello, I'm afraid to hear the possible truth to this question, but... The screen on my eMac contracts a bit in size for a fraction of a second to a second. Seems to only do it when using a browser, not just when my slide show is running or if … |
| | Hello everyone, [INDENT]I've just joined today and have come up through the electronics industry, moving over to the IT industry where I have had experience building and repairing PCs and more recently repairing G3 and G4 Power Macs. I have just aquired a faulty G5 Dual 1.8GHz PowerMac. This machine … |
| | Hi there My powermac tower G5 was working fine until yesterday and today the screens wont receive signal from tower. I just bought two Samsung monitors and installed it to the computer it work fine for a couple of days and now it does not receive the signal from the … |
| | I have a Dual 2 GHz G5 with OS 10.3.9 and a HP MediaCenter with Windows XP. Each computer is connected to a Princeton VL1916 flat panel monitor. Since they are connected to these monitors none of my computers would hibernate or shot down unless I disconnect the monitor cable … |
| | My Imac G3 was always acting up when it turns on after 5 to 8 minutes it shutsdown, so i decided to open up and found out that it has a defective power supply, no parts available so I dissembled it make an improvisions, using its optical protection switch imade … |