SHENGTON

I got some problems with my program here. There are lots of lacking in my code. Hope you can help me with this guys. I'm still a student. Here's the problem: A program that prints figures of (*): 1. Displays a menu [1] Figure 1 [2] Figure 2 [3] Figure …

Hello, good morning. :) I got some questions about the RAID 2, 3, and 4: 1. In RAID 2 and 3, if the parity disk is damage can I still recover the files? 2. In RAID 4, if the ECC disk is damage can I still recover the files?

Hello, good evening. :) This is a thesis. My thesis is "SMS Textspeak Corrector". [b]SMS Textspeak Corrector[/b] is a text messaging software for mobile phone where users can convert or correct the “txt spk” message to the original normal words. For instance, it will correct the “txt spk” text message …

Hello, good afternoon. :) Now I got some problems with my "Create Payroll". I changed the "rate[100]" integer to "salrate[100]" float. After changing these errors prompted me. [b]Errors:[/b] payroll system.cpp(157,22): Illegal use of pointer <-- This is "Error" payroll system.cpp(158,8): Possible use of 'gsalary' before definition <-- This is "Warning" …

Hello, good evening. :) I'm having a hard time with my "Searching" codes. :( [b]The problem is:[/b] When I try to search the employee number after registering, my program will print "EMPLOYEE NUMBER NOT FOUND". I don't know where's the culprit. :( Here's the whole codes: [code=C]#include <stdio.h> #include <conio.h> …

Hello again guys, I got here a Stack and Queue Array program. My problem is deleting an item in Queue. Here's a quick video of my problem: [url]http://www.youtube.com/watch?v=X_G82aU_LV4[/url] Here's my code: [code=C]#include <stdio.h> #include <conio.h> int main() { int a[100],n=0,i; int cho,choi,choice; clrscr(); do { printf("\n\n\n [1] Stack\n"); printf(" [2] …

Hello, good morning guys! I got a problem here with my submenus of Stack and Queue link list. When I try to add an item, it won't display and pop the items when I try to select the display and pop functions. Same as well with Queue. Can anyone help …

Hello, I got working code of Linked List here. But I having a problem with adding an item. I added four numbers in the Linked List. First, I added 2 then 8 then 4 and the last one 16. The result would be like this: [IMG]http://i168.photobucket.com/albums/u162/SHENGTON/display-1.jpg[/IMG] What I want to …

Hello, I'm still a novice with this C programming and I got some problems with my program. I got 3 errors and 3 warnings with my Linked List. I attached an image for you to see. Someone can help me how to solve this problem? Here's my code: [CODE=C]#include<stdio.h> #include<stdlib.h> …

Hello, good day. :) I got a problem with "passes occurred". This is the only problem left in my program. My program is about Naive Searching and Binary Searching. There's no problem with my "Naive Searching". The problem is the "Binary Searching". [b]Naive Searching:[/b] This is the result when I …

Hello, I recently made operable a computer based off of the Intel STL2 server motherboard, however when I try to start the computer and boot from the Windows XP CD, I get the following errors: PXE-E61: Media test failure, check cable PXE-MOF: Exiting PXE ROM. Operating System not found Upon …

Hello, good day. :) I got a problem here in displaying the items of array. In "Display Items", it should display the numbers that I inputted in the "Input Items". Is there lacking in my code? [b]Menu:[/b] [IMG]http://i168.photobucket.com/albums/u162/SHENGTON/menu.png[/IMG] [b]Input Items:[/b] [IMG]http://i168.photobucket.com/albums/u162/SHENGTON/input.png[/IMG] [b]Display Items:[/b] [IMG]http://i168.photobucket.com/albums/u162/SHENGTON/result.png[/IMG] Here's the code: [CODE=C]#include<stdio.h> #include<conio.h> int …

Right, so I installed a 512mb module, but it is only showing 64mb? Im sure its compatible, it is pc133-333-542, just like the 128mb that came with the computer. I upgraded my bios yet still no luck :( Thanks in advance

So here's my problem. I recently updated my BIOS on my notebook (Toshiba Satellite L450D-113, to be exact) to V1.2 so the recovery would work. But the flash went bad, and now the system will not boot. How can I reflash the BIOS?

I read a post similar to my issue, but my situation's a bit different. See, my computer starts and then stops. I press the power button, the fan starts, the lights flicker and then nothing. I literally have to press the power button 15 to 25 times to finally get …

I am working on a Compaq Presario SR1318NX. When I turn it on the fan starts out good but as soon as the COMPAQ logo appears the fan speeds up and then it turns off. I have tried running it in safe mode but it says system32\hal.dll is either missing …

Help, please! I turned on my computer and got a black screen with the message: “Reboot and Select proper boot device or insert boot media in selected boot device and press a key” I had no prior warning or problems with my computer. I hit F1 for the setup menu …

I am new to laptops but anyway: My Vaio was working perfectly. I closed the lid (it was plugged in) and 30 mins later opened it and NOTHING. My cable had power to it so assume it is OK. The battery was very bad (I had already ordered a new …

Hello everyone, I have a motherboard with a problem. The board was working fine when one day I tried to turn it on and nothing came on the display. Everything else worked fine, the drives started up, cooling fans run. At first I thought the processor had died, but after …

lost user name and lost password for ibm thinkpad 2660 windowsxp please help. thanks big jeff

Hi i turn off computer but when i turn on it after show mother bord logo befor show bootloader(grub) it be reset i did not add any new hardware . now i use ubuntu live cd . what`s probleam can any one help me ??? thanks

Well, I have a very strange problem with my laptop: sometimes it wants to boot and sometimes it doesn't want to boot. First of all, I want to specify what I mean with doesn't want to boot: If I press the power button of my laptop, then the LEDs of …

Hello, good evening. :) I got some problems with the "Bubble Sort" and "Selection Sort". My "Insertion Sort" is already ok. I just can't figure it out with this problem. Hope you can help me with this and explain it to me my mistakes. Here's the whole code: [CODE=C]#include<stdio.h> #include<conio.h> …

Hi, can anyone please help me. I'm so not technical, just use my sony vaio notebook for email and invoicing my clients. About two weeks ago the screen started freezing so I would reboot it, or remove battery and power plug overnight and reboot. Then after a few times of …

Hi, I have a toshiba sattellite A 135-S2266 The power light will come on, but the computer will not boot up the screen is dark.What advice can you foffer for troubleshooting.

Hello guys, My friend bought an old hard drive. He noticed something with the hard drive that it was just replaced with a SATA socket. Now the question is: 1. Does the Transfer Rate of the harddisk (that has been replaced from PATA socket to SATA socket) would be SATA …

Good day DaniWeb experts. This is my first post here and hope you can help me with my problem. I'm a noob with Borand C++. I see a tutorial here "[url=http://www.dreamincode.net/forums/showtopic37428.htm]Converting and Evaluating Infix, Postfix and Prefix Expressions in C[/url]". I copied the code and run it in my Borland …

Hi DaniWeb experts, good day. :) Just tested my internet speed awhile ago in three websites. Here are the results. [url]www.speedtest.net[/url] [IMG]http://www.speedtest.net/result/339081775.png[/IMG] [url]www.abeltronica.com[/url] [IMG]http://i168.photobucket.com/albums/u162/SHENGTON/Test.jpg[/IMG] [url]www.onestopclick.com[/url] [IMG]http://i168.photobucket.com/albums/u162/SHENGTON/Test2.jpg[/IMG] Question: 1. Why I'm getting different results? Hope you can help me with this. Thanks and God bless. :)

Hi DaniWeb experts, good day. :) Every time I had a customer and if the problem is in the memory. I used to clean it with eraser, and viola, the computer will had a display again. Someone told me that cleaning a memory using eraser is not advisable. It's because …