765 Posted Topics

Member Avatar for warmexxus

First, load default settings in BIOS. It will set your CPU speeds to the factory settings. If your BIOS is latest one for your mobo, it should positively identify your CPU and it's settings. There might be, however, incompatibilities with system RAM and in such case you would need to …

Member Avatar for Chaky
0
165
Member Avatar for Griffs4ever

Off course there is a way to retrieve your files.. simply put the hard drive into another laptop, or a desktop, if you have appropriate connector (like [URL="http://www.datapro.net/products/laptop-ide-hard-drive-adaptor.html"]this[/URL] one). There also is an ISO file on the net called ERD50.ISO (google it) which, when burned on a CD, can be …

Member Avatar for Chaky
0
210
Member Avatar for chrisonan

Is your battery OK? To reset the laptop, plug out the mains and take out the battery. P.S. Mobo or CPU is most likely fried.

Member Avatar for CaroonM80
0
128
Member Avatar for CopingSkills
Member Avatar for bwasson

I think that this is a networking forum material. Maybe you should consider [URL="http://www.winbatch.com/"]Winbatch[/URL] for writing batch files, but I'm not sure if it is possible to use it cross-platform. A thought: Devices attached to every machine (USB hubs, network cards, HD-s...) can be shut down independently if the machine …

Member Avatar for Chaky
0
175
Member Avatar for mikeandike22

Is it single drive or is there another optical or hard drive on the same cable? If it is single drive, then it must be set as "slave". Also check polarity of the cable on both ends.. (in case you flipped it upside-down) If there is a hard drive on …

Member Avatar for mikeandike22
0
180
Member Avatar for tbradsh1

Explain the freezing ups, please.. Are we talking about performance glitches, or total system freezes with reboots? I'm familiar with Bioshock, and there is an [URL="http://www.gamershell.com/news_41047.html"]ATI Patch[/URL] available. Also, latest patch for Bioshock is v1.1.. make sure you get the [URL="http://www.fileshack.com/file.x/11517/BioShock+Patch+1.1+-+Worldwide"]worldwide[/URL] patch.. unless you have the [URL="http://www.fileshack.com/file.x/11516/BioShock+Patch+1.1+-+English+/+USK+German"]German[/URL] version. That would …

Member Avatar for sittas87
0
108
Member Avatar for Alej

It seems like there is a Trojan there.. MIFENG-K TROJAN to be precise... and ad-spamming CoolWebSearch also. For the CoolWebSearch, I suggest you uninstall it via Add/Remove programs in Control Panel (if I'm not mistaken, there is an uninstall string there). For the Trojan.. that is another story.. I suggest …

Member Avatar for Chaky
0
150
Member Avatar for victimless

Call me crazy, but it looks to me like your keyboard has some keys stuck.. try booting with no keyboard. Also, remove the CD(s).. scratched CD can halt the booting while the CD drive pointlessly tries to read the basic info off the CD.

Member Avatar for Chaky
0
64
Member Avatar for Kirb70

Make sure that it is recognized in your desktop's BIOS. Make sure that it is on secondary IDE channel, as it is probably set as master. Also, make sure that the secondary IDE channel isn't disabled in BIOS. Is the power cable connected to it?

Member Avatar for Kirb70
0
139
Member Avatar for superspeedz

You might need to use f6 drivers, especially if you're trying to install XP. You will need floppy drive too. CD that came with mobo should be bootable, and there should be utility for creating such floppy.

Member Avatar for EMCCleveland
0
143
Member Avatar for mattyd

I am an atheist. (both of my parents are) No scraments, not baptised, not circumcisized, no nothing. Does that make me evil or something? I think not. (Haven't killed anyone. Yet.) I think it makes me OBJECTIVE regarding religions. And guess what, people. I DO think that there is a …

Member Avatar for ~s.o.s~
3
10K
Member Avatar for Chaky

There is a bot running around. [URL="http://www.daniweb.com/forums/member318036.html"]This[/URL] is the account, and it is posting adverts in the troubleshooting dead machines forum.

Member Avatar for happygeek
0
84
Member Avatar for Shiggity

That, my friend, is usual behavior of short circuit protection. Your PSU detects a short circuit, immediately shuts down and refuses to start again, until it is reset. And reseting is done by switching PSU switch off and on. You should test the machine with different monitor, because it is …

Member Avatar for Chaky
0
138
Member Avatar for Serunson
Member Avatar for jbennet
0
894
Member Avatar for samaru
Member Avatar for ATF

You should check your BIOS settings for the HD. Make sure it's set on LBA. In the on-board chip settings turn off all the enhancements and set data transfer on PIO. Also check the jumper settings on the HD. Especially ones referring to no. of cylinders/heads/sector to see if different …

Member Avatar for Chaky
0
490
Member Avatar for taylorjt4

Hi. What you can do i use hijackthis and check in the running processes: C:\WINDOWS\sysockeu.exe C:\WINDOWS\sysodkcs.exe C:\WINDOWS\sysoghcx.exe C:\WINDOWS\sysokuaw.exe and O4 - HKLM\..\Run: [1029BB4B-16A9-4E77-AA3D-96930BD68EEC] "C:\WINDOWS\sysockeu.exe" O4 - HKLM\..\Run: [852EBF20-A95D-4F1F-B9C2-B2CD24350F3E] "C:\WINDOWS\sysodkcs.exe" O4 - HKLM\..\Run: [756349DC-6D9E-4F2A-9B24-269661F073C3] "C:\WINDOWS\sysoghcx.exe" O4 - HKLM\..\Run: [2177F056-0AA6-4D6C-A944-13F71F341C29] "C:\WINDOWS\sysokuaw.exe" and click on "fix checked".

Member Avatar for crunchie
0
169
Member Avatar for jazziemack

Run hijackthis, check O4 - HKLM\..\Run: [outlook] C:\Program Files\outlook\outlook.exe /auto and click on "fix checked" It is a Win32.Worm.VB.DW [URL="http://www.bitdefender.com.au/VIRUS-195364-au--Win32.Worm.VB.DW.html"]acording[/URL] to BitDefender.

Member Avatar for jazziemack
0
123
Member Avatar for Asiweb

[URL="http://en.wikipedia.org/wiki/Adobe_Flash"]Yes[/URL] they are one and the same. You will need to open the .swf file with internet explorer. Rightclick, then click "open with" and select Internet explorer. If it is not shown on the cascaded-context menu list, then you will have to select it manually from the list in the …

Member Avatar for Chaky
0
105
Member Avatar for Chaky

This one is one nasty adware. It eluded hijackthis, Spy sweeper, ad-aware, BitDefender, Malwarebytes' Anti-Malware.... Only [URL="http://research.sunbelt-software.com/threatdisplay.aspx?name=Trojan.in-t-e-r-n-e-t&threatid=191099"]refference[/URL] I came across named it Trojan.in-t-e-r-n-e-t. It mentions that the author is NicTech Look2Me. Suffice to say that Look2Me-Destroyer (yet another tool I tried) failed to get rid of the thing. I think …

0
53
Member Avatar for Mleonpi

If there is any hardware faliure, it is logged in event viewer (application or system branch). In the "run" menu type [B]eventvwr[/B] and post any suspitious events ("error" type).

Member Avatar for Chaky
0
413
Member Avatar for >shadow<
Member Avatar for maui_mallard
0
884
Member Avatar for zbyang

Have you tried booting without main battery? You didn't mention that combination. It is possible that the battery is completely dead and that it is draining all of the juice that comes out of power supply, making one big short circuit. You should also check the motherboard for blown/damaged capacitors. …

Member Avatar for Chaky
0
125
Member Avatar for AmjadIT

CPU fan error usually means that the RPMs are too low, or the threshold for the alert is too high. That is changeable in the BIOS setup. Hmm.. Overclocking failed! Press F1 to enter SETUP or F2 to continue. Overvoltage failed! That happens after the machine failed to start after …

Member Avatar for Chaky
0
1K
Member Avatar for 81griffinIT

Maybe you need healthy AGP card to be able to switch back to on-board VGA via BIOS settings... or simple clearing the CMOS via jumper (that is usually located near BIOS battery) would do the trick, giving that the on-board video is enabled by default.

Member Avatar for 81griffinIT
0
88
Member Avatar for The Dude
Member Avatar for Chaky

I was wondering if there is a tool that can identify which service/application is using network adapter. Thing is, I am getting allot of network traffic in "idle" mode. All I know is that it is coming from my PC and is sent somewhere on the internet. As "idle" mode, …

Member Avatar for DimaYasny
0
115
Member Avatar for vmaxusb

Maybe you should set up additional serial port. Try "add new hardware" in control panel.

Member Avatar for Chaky
-1
82
Member Avatar for just_humes
Member Avatar for The Dude

hehe Your score is 0 on a scale of 1 to 10. You hate Bush with a writhing passion. You think he is an idiot, a liar, and a warmonger who has been an utterly incompetent, miserable failure of a president. Nothing would give you greater pleasure than seeing him …

Member Avatar for sneekula
2
419
Member Avatar for shouvik.d

You hould change booting sequence in BIOS. 1-Hard disk 2-CD Drive 3-Network (a.k.a boot agent)

Member Avatar for explodinghead75
0
109
Member Avatar for reuvn

Have you tried downloading and installing any CODEC packs? Windows media player is capable of automatic CODEC download, unless you disabled it. (tools/options/player) Sometimes my windows media player mutes the sound by itself. There is also setting regarding audio device (tools/options/devices/speakers properties) Make sure it is set on default device.

Member Avatar for vigneshvh
0
390
Member Avatar for The Dude

Here is a true story: My father (retired ship engineer) told me that, once they had a huge problem with ship's auxiliary engine. That kind of engine is used to run the generator and is usually the size of the engine that is used to propel the locomotive. (just to …

Member Avatar for The Dude
0
199
Member Avatar for Salo1971

That is normal behaviour. When there is a single VGA, the PCI-E works at x16 mode, and in SLI mode it is 2x8. No tweaking possible.

Member Avatar for Salo1971
0
67
Member Avatar for Chaky

Hi. I use [URL="http://www.viewsoniceurope.com/data/62/447PRO.pdf"]Nokia 447PRO[/URL] ([U]NOT[/U] 447XPRO) and have 4 problems: 1 - There is no driver (inf + color profile) available (I bought it 2nd hand without the drivers & utilities CD) 2 - I've recently discovered that my graphic card isn't happy with my monitor's EDID 3 - …

0
74
Member Avatar for bill.jeffs

[quote=Arcnazgul;438195]I don't think it needs a speaker to make the beep on post but it does sound like a power problem do you have a spare psu to test it with?[/quote] Speaker MAKES the beep sound. Some motherboards have on-board speaker. Looks like a big capacitor with a hole. The …

Member Avatar for bill.jeffs
0
315
Member Avatar for The Dude
Member Avatar for The Dude
Member Avatar for The Dude

In my expiriance it is not possible to get rid of that (annoying) line. The "USER.DAT" and "SYSTEM.DAT" are files with WINDOWS REGISTRY! DO NOT TEMPER WITH THEM! Or youll mess up windows and be forced to reinstall them. It is normal that they are modifyed whenever ANYTHING is modified …

Member Avatar for thunderstorm98
0
626
Member Avatar for EAMiller

All audio cards can be connected to any audio system. Mine is connected to Hi-Fi. All you need is cable and jack connectors to connect line-out (or audio-out for headphones, if the line-out isn't available) from your audio card and connect to the line-in on your audio system. Line-out is …

Member Avatar for Chaky
0
115
Member Avatar for umodjm

Read [URL="http://tldp.org/LDP/tlk/dd/pci.html"]this[/URL] article. It has allot of info of how the busses and bridges work.

Member Avatar for Chaky
0
89
Member Avatar for Sniph
Member Avatar for mk112

Your floppy is still operational. You'll need to flash again. There are two revisions of your motherboard. use either [URL="http://america.giga-byte.com/FileList/BIOS/motherboard_bios_ga-965p-s3_f12.exe"]rev. 1.0[/URL] or [URL="http://america.giga-byte.com/FileList/BIOS/motherboard_bios_ga-965p-s3_f12.exe"]rev. 3.3[/URL] BIOS, depending on your model.

Member Avatar for Chaky
0
149
Member Avatar for bondi007

If I understand it.... You want to install OS without CD... Only one way, if you have Windows Server 2003 (or any OS with RIS service) on another machine and hook them up in network. You would also need RIS (Remote Installation Service) running and configured. Then, if you have …

Member Avatar for bondi007
0
210
Member Avatar for spidey

You should try to recreate the hanging or the restart and post what is that you did to get it. Also look at your event viewer to see if there are any warnings or error reports. It is in the administrative tools. (XP/2k/vista not 98/95)

Member Avatar for Chaky
0
49
Member Avatar for knip808

Never post your email. You will get spammed. Did you try your video card on that other PC? You should try reinstalling the motherboard and video drivers. No standby option is a sign that the motherboard drivers are not working. That would explain why your display is acting funny, because …

Member Avatar for jbennet
0
272
Member Avatar for The Dude

[URL="http://drawapig.desktopcreatures.com/gallery/large.asp?id=1527997&p=0&hof=1&q=personality+test"]Looks[/URL] like a dog.

Member Avatar for hbk619
0
220
Member Avatar for Duki
Member Avatar for sharaths81

Maybe you should try changing setting s for Avast antivirus and disable some of the features? If you can't get control of your PC, do this: - prepare (if necessary) f6 driver floppy - disable HD in BIOS <-- crucial - boot with windows setup CD and install fresh copy. …

Member Avatar for Chaky
0
96

The End.