Member Avatar for paintman161

when i turn on the power button and seems to boot normally, but before it even gets to the windows screen and goes right into the options, to select safe mode, normal mode, etc. it does it everytime, does anyone know what is wrong with it? I hope its not the hard drive, i already had it replaced once like a year ago. please help

thanx

  • 3 Contributors
  • 4 Replies
  • 181 Views
  • 1 Week Discussion Span
  • Latest Post Latest Post by alc6379

Dani AI

Generated

Quick summary of likely causes and a short, practical checklist based on the thread: when the Advanced Boot Options (safe mode / normal mode) shows every startup the usual culprits are a stuck or noisy keyboard key (F8), a persistent boot configuration change, Windows detecting repeated failed boots, or filesystem/drive problems. The display flicker that improves when the lid is moved points to a physical video-cable or hinge issue that is separate from — but can coexist with — boot problems. Notes: ’s suggestion to enter debugging/safe modes is a useful way to get into the OS temporarily; ’s pointer toward the System Configuration tool is also a good next step once a normal boot is achieved.

A concise troubleshooting order to follow:

  1. Select Normal Mode or Last Known Good Configuration from the menu. If Windows boots, run the System Configuration utility (msconfig) and restore Normal Startup, then reboot.
  2. Test for a stuck key: disconnect any external keyboard or try a different one; on laptops, press every key several times to free sticky keys. A held/shorted F8 will trigger the menu.
  3. Disconnect all nonessential peripherals (USB drives, printers, etc.) and try again.
  4. If the system will boot, run ScanDisk and back up all important files immediately. Repeated boot prompts can follow filesystem errors or a failing drive. Listen for clicking/noisy disk activity.
  5. If unable to boot to Normal Mode, use a bootable rescue disk/USB to copy data and run disk diagnostics.

Regarding the screen flicker: connect an external monitor. If the external display is stable, the internal cable/inverter or panel is likely damaged (hinge movement often points to a loose ribbon cable). If both displays flicker, suspect the video chipset or motherboard. For physical repairs on a laptop, professional service is recommended (opening may void warranty).

If uncertainty remains after these tests, prioritize a full backup and have a tech inspect the hinge/cable and run a SMART/disk-health check.

Recommended Answers

All 4 Replies

Member Avatar for loser34

ive had this problem b4 but just start up in debugging mode thats what worked for me i dont know if it will work 4 u but try it

and what os do u have?

Member Avatar for paintman161

I have windows ME

Member Avatar for paintman161

also my screen likes to flicker alot but it fixes it if i move it a little too maybe bad wire connection?>?

Be a part of the DaniWeb community

We're a friendly, industry-focused community of developers, IT pros, digital marketers, and technology enthusiasts meeting, networking, learning, and sharing knowledge.