0

Not bootable CD-Rom

Intel UNDI, Pxe-2.0 (build 082)
Copyright (c) 1997-2000 Intel Corporation

For Realtek RTL8139(X)/8130/810X Pco fast Ethernet Controller v2.13 (020326)
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting PXE ROM.
Floppy disk fault -- insert valid boot disk and press any key

^ i need a lot of help and i cannot risk formating it also recently stopped reading the DVD-R drive plz help coz i dun understand, Catweazle plz help + everyone else^ *****It is making a scanning noise ,dull and every second, plz help*********

3
Contributors
3
Replies
4
Views
12 Years
Discussion Span
Last Post by MidiMagic
0

also this is not on my current computer (this one) but on my normal mosted used laptop

0

Not bootable CD-Rom

Intel UNDI, Pxe-2.0 (build 082)
Copyright (c) 1997-2000 Intel Corporation

For Realtek RTL8139(X)/8130/810X Pco fast Ethernet Controller v2.13 (020326)
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting PXE ROM.
Floppy disk fault -- insert valid boot disk and press any key

^ i need a lot of help and i cannot risk formating it also recently stopped reading the DVD-R drive plz help coz i dun understand, Catweazle plz help + everyone else^ *****It is making a scanning noise ,dull and every second, plz help*********

hi we have the same problem at my laptop computer pls send me a letter containing how to solve this problem...
email me at erslenjr@yahoo.com

0

That sounds like it is trying to access the floppy drive instead of the CD drive. Check the BIOS boot settings.

You could also have a corrupt driver, or the wrong driver for the drive.

This topic has been dead for over six months. Start a new discussion instead.
Have something to contribute to this discussion? Please be thoughtful, detailed and courteous, and be sure to adhere to our posting rules.