Member Avatar for tracsimp

Please help, sucessfully installed wireless connection with WG111T adapter.

'Wireless connection to arouter is OK but problem with the router'

I have no idea what is wrong?

Any ideas.

  • 2 Contributors
  • 2 Replies
  • 83 Views
  • 1 Day Discussion Span
  • Latest Post Latest Post by tracsimp

Dani AI

Generated

A compact troubleshooting checklist for anyone using a Netgear WG111T who finds the client associated with the wireless network but still has routing or Internet problems. was right to ask for more detail, and since later reported the issue was resolved, the steps below collect the common, verifiable checks that usually fix this class of problem.

  • Confirm the client actually has a usable IP in the router subnet (not a 169.254.x.x APIPA address). If the IP is wrong, the DHCP path from router to client is the issue.
  • Test basic reachability: ping the router, then a public IP, then a hostname to separate gateway, Internet, and DNS failures.
  • If the router shows no WAN/Internet, connect a PC to the router by cable to verify the ISP link and router configuration (PPPoE credentials, DHCP upstream).
  • Look for driver/utility conflicts: WG111T drivers often ship with a vendor wireless utility. Use either the Netgear utility or the OS wireless manager, not both. Reinstall the latest WG111T driver if needed and disable USB power-saving.
  • Check router settings: DHCP enabled, no MAC filtering, no client isolation, and matching encryption/authentication (test briefly with encryption off).
  • Update router firmware only via the manufacturer procedure, and back up settings before any factory reset.

Quick command checklist (Windows):

ipconfig /all
ipconfig /release
ipconfig /renew
ping <router_IP>
ping 8.8.8.8
nslookup www.google.com

When multiple devices fail, focus on the router/ISP; when only the WG111T client fails, focus on drivers, utility conflicts, and USB/port power.

Recommended Answers

All 2 Replies

Member Avatar for DenisOxon

Please help, sucessfully installed wireless connection with WG111T adapter.

'Wireless connection to arouter is OK but problem with the router'

I have no idea what is wrong?

Any ideas.

Welcome to Daniweb,

For anyone to offer advice we need some idea of the problems you are encouintering and what steps you have taken to solve the problem.

Denis

Member Avatar for tracsimp

Welcome to Daniweb,

For anyone to offer advice we need some idea of the problems you are encouintering and what steps you have taken to solve the problem.

Denis

All sorted now. Thanks.

Be a part of the DaniWeb community

We're a friendly, industry-focused community of developers, IT pros, digital marketers, and technology enthusiasts meeting, networking, learning, and sharing knowledge.