Big Max

I am trying to activate DMZ on my computer. I have a Linksys router and I am on my house's network. However when I enter the Web adress for the Web Utility, which is "http://192.168.1.1", it says "Page Cannot be displayed", I need help!

The fun begins..... I'm upgrading my Powermac G3 B&W with a serial ATA Hard drive and controller card. I want to copy the contents of the old drive to the new drive. I know that in the PC World Maxtor has a utility on a boot disk that allows you …

I've personally amassed a decent collection of older Macs. I love these little boxes-- I can still make them do all kinds of things, as old as they are! I'm curious if there's anyone else here that loves the older Macs, or maybe just still uses them. Here is my …

I know I'm a bit late with the news, but just was wondering everyone's opinion on this. Think we'll see a new incarnation of the all-in-one line anytime soon?

Ok, My Palm Zire syncs fine with my PC at work but with my Mac at home it does not. I keep getting "File Locked" errors. I've taken screen shots of them. I got some suggestions from Palm that did not work. Here is what they told me to do: …

I am going to home network. I am really unsure on how to make all the connections. Also is there any special software that I should have? What are the steps in making a network connection with the mac computer? Thanks

I have a WI-FI notebook that has 802.11g ethernet in it and a Desktop that has the wireless base station, cable modem, ethernet cords hooked up to it and everything. I've done everything the microsoft MN-700 Wireless-G base station instructions have told me to do. I've installed everything (i think) …

picked up a powermac 5400/200. I can not get past the at ease log in because I do not know the user name or password. Is there a way to turn this off or reset the needed info. Thanks for any help.

I've recently come by a 1999 model G3 which is great but I'm reduced to kindergarten by my total lack of basics. Q1. How do I uninstall stuff, do I just send it to the trash? Q2. I can't run or install any of my old windows programs, eg winamp. …

Hello, Dani, our System Administrator, has created a new forum called Mac Tips and Tricks. I'd love to write about a number of things concerning the Macintosh, but being at the administrator level for so many years, I may be a bit out of touch on what new people would …

i have an apple using the mac os x operating system. I bought it yesterday from a pawn shop. it worked fine yesterday at the pawn shop when it was on. Today i turned it on and a screen pops up MAC OS X and an icon asking for a …

:D :confused: :confused: my mac mouse is mad at me & driving me mad. I have installed a Dlink router but did something to make my mouse mad & its now frozen. Messages are: An error has been detected in the list of ADB devices maintained by the system. (133) …

Well... that laptop went up to get connected with it's server again (several hundred miles away from me). I had added the server to it's c:\i386\hosts file and set the ip on the server to the same. (since that worked to see my home network perfectly) and the call comes …

Hi All, Stupid question for ya, when networking windows machines you can enter a domain or a workgroup, is the any way i can put a workgroup name into mac os9. as i am trying to link my windows pc in with the mac to provide file shares. ps. I …

Greetings, Whenever I attempt to save Jpegs from the web onto my hard drive it use to save them as Jpegs but all of a sudden it will only save them as .bmp files. Unfortunately when I attempt to open them, they cannot be viewed, as all of my Graphic …

recently i bought a wireless network card so i can connect my notebook and desktop together P2P. I am able to get a connection but thats where it ends. Cant share files, cant ping, cant do anything with eachother.. Ive sure ive installed everything properly since my notebook and desktop …

Hello, if someone can help me, that would be GREAT! I have a network running in the house with 2 desktops and a laptop. I am connected with SBC DSL with a wireless router that it came with. I have internet running on 1 desktop and the laptop, but cant …

Greetings Friends, I hope you all had a wonderful Christmas!! :cheesy: Here's my issue- We've moved and I'm on dialup until Earthlink gets my DSL connectin back up. I dial in on my G3 B&W and lose connectivity with my home network shares. It appears that I can either be …

Im kinda of a newbie to wireless networking however i have a few questions I cant seem to find the answers on the net. given a good or worse Wireless PCI Adapter what is the maximum range they can communicate to wireless router inside a house. Guessing the house has …

I need help. I recently upgraded to OSX 10.2.8 after installing my computer froze and I got an error message. it includes the date plus "init:can't exec /bin/sh for single user: Exec format error" I have tried booting from CD, using various keyboard commands and nothing has work yet, any …

bought win xp home ed "upgrade, attempted to install it and registered product code to my backup computer , Gateway 950 gighertz with 2 8 gig harddrives, cddvd rom drv and cdrw drv, ,,,,,,,,,,and roxio cd burn program for phillips cd-rw drv. got corrupt errors on Uggrade edition so i …

I don

I have a computer that use to use xp but I had to reformat it so it has windows 98 on it now and I dont know how to renetwork it again. My other computer that is in the network runs off of win xp. I am not familiar with …

Wow it seems every post I read starts out with "Hey I am a newbie to this, I need some help" then it is continued by a long long long paragraph without any commas, periods, and so on. Well here I go, but i'll try to keep it short and …

This is driving me just crazy! I have Adobe Acrobat Reader 5 installed and it works fine. However, whenever I open up a *.pdf file, it defaults to opening up in Apple's "Preview" application. Where could I change this setting?

Greetings, From my G3 I can see my Windows XP shares, and my Windows XP shared Printer is set up, but when I attempt to print from my G3 I get one line of gibberish. The following is the output of the gibberish: %! PS - Adobe - 3.0 %RBINumCopies …