Posts by caperjack

doing sumpthing way over my head ,wow, post is like reading a riddle and trying to solve it .

nice board it sure will support 4 gig ,i think its a wast using xp on such an advanced board , dam shame actually .
http://www.gigabyte.com.tw/Products/Motherboard/Products_Overview.aspx?ProductID=2989

Nothing to do with XP. Everything to do with whether or not one has a 64bit operating system.
If your XP is only 32bit, then 4Gb of RAM will not be recognised. Same goes for Vista.

true, but it shouldn't revert back to only 2gig,unless that's all the motherboard supports ,what is make and model # of your motherboard

i would reload win 7 but cant dlete or format hdd now i can even load windows anymore stays !

hi please be careful of typos than can mean 2 different things [ now i can even load windows] you mean can't ,right

anyway are you using the win7dvd to format and reload ,as you can't format/delete windows from within windows ,as it is being used

hello ,give this a look /try.

Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)

Reasons for this error include a driver that is not present; a binary file that is corrupt; a file I/O problem, or a driver that references an entry point in another binary file that could not be loaded.

Have you installed a 'packet driver' lately??

Possible Solution......go to Start /run/ type in ,regedit.and do the following

There are 2 reg keys that can screw the device......remove them both and reboot......

The keys are:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325 -11CE-BFC1-08002BE10318} - "Upperfilters" and "Lowerfilters".

go to there u will find win7 ultimate

you are breaking daniweb rules by posting that site

They all show in tools/plugins/options

i google your problem and some of the post go back to 06 with people having same problem ,read a few and they suggested going back to wmp 10 try it to see if visualization works ,then keep it or reinstall wmp11 and try again

it works on win7

its possibly a dead drive or not connected in the case correctly

non issue ,something wrong with the image not the monitors ,and your attachment is nothing but black

Thanks for your help. Took it back to PC World last night and it was apparently the Num Lk key that was on - bit embarrassing!

yup,thats what im referring to

you would need an adapter from avg to mac connection
like this
http://www.computercablestore.com/6_FT_VGA_to_Mac_Monitor_C_PID394.aspx

2) Is there a simple remedy?

Thanks for any help you can give.

yes ,you have the keypad turned on ,not sure but on mine its thee FN key" bottom row" and f11"top row " to turn it off

not sure ,but check in tools/option and plugins and make sure thy are added

well vista & 7 have an anyoying cut,paste,copy paste message boxes, esp when over writting files, click here tick here, chich here. Well, their is a site about window 8 for starter if you google, in my opinion xp was the best of all time and everybody in the IT kinds of agree with me

yes xp is good and may be the best after sp3 ,but foe me a home user win98se was great ! im sorry i don't get any annoying message box when i cut/copy and paste files to move them ,works same as winxp for me

I have just heard that their is a new versio of windows on the way. i haven't seen some screenshots but i bet will the same as windows 8. I think it a bit stupid, they should just fix the the bugs and service packs for windows 7. I hope they fix the cut,copy,paste stupid time comusming message boxes

i get the point ,but see no reason for the post ,how do you know that they aren't working and soon going to release a SP.for win7 [the best os release since win98 se ] ,whats wrong with your copy/ past i have no problem with mine works as quick as always

as its a net book i cant reinstall OS as i have no drive,

someone please heeeeeeeeelllllllllllppppppppppp...

hi may nedd to get a external dvd rom or install windows on a thumbdrive, depends on your computer knowledge
http://blogs.technet.com/aviraj/archive/2009/02/01/installing-windows-7-using-usb-thumb-drive.aspx

check task manager again going into resource monitor ,see attached image

using snipping tool in start ,capture your screen shot of yours and post it maybe

i think it is chargeable .Kindly let me know any other .any help
would be highly appreciated.Kindly find the attachment also.do
you have idea for skype.Kindly let me know a bit.

nothings FREE in this world
skype is free if the person you are calling is on skype.
http://www.skype.com/intl/en/getconnected/

hello,and welcome to daniweb, not saying this will work but i's worth a try i think ,i assume you are using internet explorer, open it go to tools/advanced and reset IE settings down the bottom

Oh, and to rule out hardware problems, I booted the system in Ubuntu Linux from CD and visited the same Flash sites that definately caused slowdowns in windows. Everything ran very quickly, no slowdown. In fact, Flash seemed to run far too fast. So whatever it is, its in windows. But What?

/QUOTE]
that eliminates all hardware except the harddrive ,may be getting bad

I need a driver for HP designjet 100 to be installed in Win7;
where to find it? Thank you.

www.hp.com

Hello I am new to forums in general, please accept my apology for posting in the wrong place, hopefully this reply is going to Caperjack,

Thank you for your reply I will certainly try your advice.
Dia

it sure did, good luck

it worked, is been fixed. Thanks

great .please mark thread solved ,you will see a icon [solved] to do so ,thanks ,good luck

could you e mail me DIRECT on what to to ]

sorry not email ,keep it on site .
i suggest you take it to someone who know how to fix computer .

sorry it been so long since i have used ubdisk,maybe later today i will try it and give suggestion.
sorry i recommended ubcd ,its use it complicated at best .
i now will suggest borrowing a windows cd and running recovery ,and do a chkdsk /f

Maybe this will give an idea to someone, I dont know what to do with this from here? Any ideas?

what have you done so far, forget about belarc adviser ,that was for you ram /speed inquiry ,lets fix your problem with outlook,you remember the error message you posted about in your first post,did you try what was suggested in the link i posted in post #8
more suggestions here
http://www.google.ca/search?q=MESSAGE+CHARACTER+SET+CONFLICT&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a

chk my post #8 for link to help with your outlook error

This is very, very strange. I've just checked all the screensaver clocks that didn't work, and they are all behaving correctly now!
I wonder why? Ah,well, such is life!!

sometime a restart of computer once or twice is all it takes to correct some software

This still isnt going well! Ive downloaded UBCD version 4.q for win.exe and have it on a disk.

I cant seem to find what to do with it?

1 - I put the disk in on start up and nothing.

2 - i press F12 change boot to only do CDrom - I only have option to put CDrom as 1 and the following one as 2? I start up PC and it thinks about it. Then comes up with Cannot boot, F1 to re-try, etc...

3 - It takes me to safe mode asnd nothing? what am I missing??

I have downloaded the boot x3 1/ in Zip, 2/ in previous extracted zip and 3/ .exe and nothing.

use the iso download ,it will burn and make the disk bootable
use iso imageburn to burn it if your burning software doesn'r support iso burning
http://www.imgburn.com/index.php?act=download

install of XP at the 39 minute left mark whether I insert the XP cd or not. Also can no longer get into SAFE MODE as setup is not finished it says
=================
above is one of the reasons they tell you to backup data before attempting a repair install,
i suggest removing the drive and slaving it in another computer to retrieve data and then try repair install again [make sure cd is clean and no scratches]or format and reload

Hi, this is most important !
4 - I dont have a recovery disk. At this stage I cannot get into the system to fix it?

you are going to be able to little or nothing wit out it or some other form of boot disk like UBDcd
http://www.ultimatebootcd.com/download.html

MESSAGE CHARACTER SET CONFLICT..

What do I need to do to get away from this in outlook?

check this out might help .
http://forums.majorgeeks.com/showthread.php?t=17691

well you must have done more that just stop it in task manager .
system32 folder is in the windows folder !
do this i think you allready did it but try once more .

ALT+CTRL+DEL, start task manger/go new task/ type in EXPLORER.EXE/ hit enter

Download malwarebytes , install and update it, and then turn off your internet and run malwarebytes

Download Malwarebytes' Anti-Malware (http://www.majorgeeks.com/Malwarebytes_Anti-Malware_d5756.html) to your desktop.

* Double-click mbam-setup.exe and follow the prompts to install the program.
* At the end, be sure to checkmark the Update Malwarebytes' Anti-Malware and Launch Malwarebytes' Anti-Malware, then click Finish.
* If an update is found, it will download and install the latest version.

* Once the program has loaded, select Perform full scan, then click Scan.
* When the scan is complete, click OK, then Show Results to view the results.
* Be sure that everything is checked, and click Remove Selected.
* When completed, a log will open in Notepad.
* Post the log back here.

The log can also be found here:
C:\Documents and Settings\Username\Application Data\Malwarebytes\Malwarebytes' Anti-Malware\Logs\log-date.txt
Or at C:\Program Files\Malwarebytes' Anti-Malware\Logs\log-date.txt

Make sure that you restart the computer.

HELP ME, I accidently ended explorer.exe (my shell) in Task Manager. I went to New Task>explorer.exe>run and it only opened windows explorer but did not open my shell.

reboot computer

send u mail address so u can tell me more and see if u can help me with other problems or mine is SNIP

send you nothing ,

sounds like heat problem ,get a can of compressed air and blow out the fans ans fins

take it to repair and this with the hdd in it

Hi Jim,
Could you share that answer with others here and then mark this thread as closed. You will see an place down the bottom of this window. "Mark thread as closed"

sure bob p-ss off another great American.lol

If I have posted in the wrong place, just let me know.

Thank you,

Jim

you posted in the wrong section ,should have been in viruses and other nastiest section

wipe free space under ccleaner windows is taking so long

run it in normal mode ,according to malware log you had 1 trojan and it fixe it

boy,if any of them icons looks like a cowboy,cowboys in your are must dress driferent that the ones in my area .smoke any good weed lately .lol

making sure, after malware scan is done port the log restart PC and run it again plus ccleaner right?

correct

k i got win 7 on desk top and labtop when i started the home group it never asked meto join on labtop so it obvouse theat there both running there own im wondering if there is a way to reset this so i can join them to gether it would be really helpfull for me for school if any on has any info please let me know thank you

i think its just a matter of setting the same password in both

ok.try this !

Download Malwarebytes' Anti-Malware (http://www.majorgeeks.com/Malwarebytes_Anti-Malware_d5756.html) to your desktop.

* Double-click mbam-setup.exe and follow the prompts to install the program.
* At the end, be sure to checkmark the Update Malwarebytes' Anti-Malware and Launch Malwarebytes' Anti-Malware, then click Finish.
* If an update is found, it will download and install the latest version.

* Once the program has loaded, select Perform full scan, then click Scan.
* When the scan is complete, click OK, then Show Results to view the results.
* Be sure that everything is checked, and click Remove Selected.
* When completed, a log will open in Notepad.
* Post the log back here.

The log can also be found here:
C:\Documents and Settings\Username\Application Data\Malwarebytes\Malwarebytes' Anti-Malware\Logs\log-date.txt
Or at C:\Program Files\Malwarebytes' Anti-Malware\Logs\log-date.txt

Make sure that you restart the computer.
and this program after malwarebytes .
CCleaner
Download Ccleaner, Install it, Open it...
Under the 'Cleaner' Section select all in the 'Windows' And 'Applications' Tab, Then click on 'Analyze' And then 'Run Cleaner'...
Do The Same In The 'Registry' Tab, i.e. 'Scan For Issues' and 'Fix Selected Issues', It will ask you to make a backup, DO IT...Then Click on 'Fix All'run the registry one until it finds no more!...Now Reboot The Pc..

ok,but what about my quetion

Hello,

but still I can access the web even on safe mode & network.

i will assume this is a typo and you mean[ but still I cant ]

the diagnose connection says is with the firewall.

did you check firewall settings or turn off the firewall land try connnecting

wow ,glad i didn't have the problem you are having when i upgraded to win7,lol just a little tong and cheek ,personally i don't see the problem as i stopped using a screen saver back with win98, i just set it to turn off the monitor , works for me .

i know it doesn't mean much but i skipped vista ,went right to win7 ,and love it, and the new task bar is my favorite option ,and the start menu is great to ,not much different than vista in short i really like Win7,maybe because i got it for FREE from Microsoft,lol