caperjack

have a look around [url]www.bootdisk.com[/url] and you should fine file and info for creating a boot disk[cd] for when you have no floppy drive ,and just do a search for fdisk and how to use its command to create a new bootable partition on the drive

[QUOTE=raptor660;679468]i have a compaq presairo 2100 at start up comes to a point were it says operating system not found ?[/QUOTE] its not detecting your harddrive ,on bootup go into setup/bios and see if it shows you harddrive there

I no expert about this for sure ,but just reading the first link and the last ? states= The sum total cannot exceed 96MB. and this = Pre-allocated memory is invisible to the operating system. The additional memory requested by the application is relinquished back to the operating system upon …

i have done a repair install many time, in doing what you are doing ,although i do recommend a fresh install, i have done the repair on many of my customers computer [that i didn't want to do a fresh install of all programs for one reason or another ]and …

I dough if very much ,highly on likely ! but i could be wrong ,but not this time, i don't think

loading what! what theme!!

Hi ,welcome to DaniWeb .give this a try ! Repair Internet Explorer: Go to Start - Settings - Control Panel - choose Add-Remove Programs. Click to highlight Internet Explorer then click the Change-Remove tab - choose Repair I.E. OK - Yes. If you get a message saying it can't be …

[QUOTE=zeroth;671196] file system corrupt...please run chkdsk (the system actually demands a chkdsk on restart) zeroth[/QUOTE] try chkdsk /f ,from the recovery console repair when you boot computer from the winxp cd.

Download **Malwarebytes' Anti-Malware** ( <a href="http://www.majorgeeks.com/Malwarebytes_Anti-Malware_d5756.html" rel="nofollow">http://www.majorgeeks.com/Malwarebytes_Anti-Malware_d5756.html</a> ) to your desktop. * Double-click **mbam-setup.exe** and follow the prompts to install the program. * At the end, be sure to checkmark the **Update Malwarebytes' Anti-Malware** and **Launch Malwarebytes' Anti-Malware**, then click **Finish.** * If an update is found, it will download …

and for photoshop cs3 you would be better off putting a video card into the tower . pci-e i would assume it take

yes the are.:)

maybe in safe mode you could go to the control panel/add and remove programs ans see if you can uninstall the update or if you are so inclined you could try MS's suggestion . [url]http://support.microsoft.com/kb/914232[/url]

what did you wipe the keyboard with , to me it sort of sounds like a short inside the keyboard .

[QUOTE=r_freeman123;573436]hi all, please help me, I got a problem to enter windows XP prof., it show empty desktop and there is no user, no start menu. when i press Ctrl,Alt,Del many time i got the task manger and there is no user in it. please can i do to get …

[url]http://www.htc.letstalk.com/product/browse.htm?pgId=100[/url]

hi,i don't know the program that well but i typed the text,went to tables and drew a box around the text and the text popped out, so i highlighted the text and cut and pasted back into the box .

this happens to me from time to time ,usually fixed the next time i get updates

[url]http://pcsupport.about.com/od/operatingsystems/ss/instxprepair1.htm[/url]

follow the instructions here fairly strait forward . [url]http://support.microsoft.com/kb/900325[/url]

LOL, sounds like 2 scamers trying to scam each other ! good luck to the both of you !LOL

try going into safe mode an uninstall the drive or rollback the driver in device manager . get to safe by hitting f8 on bootup

bad power supplies can turn on fans but not have correct/enough power to boot windows

Power supply ! They can go bad,but still turn on fans and not have enough/correct prower to boot to windows. [url]http://en.wikipedia.org/wiki/Computer_power_supply[/url]

[QUOTE=BrendanK;674291] Is this a power regulation problem? What part needs to be replaced to solve this problem? Any ideas whatsoever would be a help. Thanks![/QUOTE] sorry for your troubles ,but you will need to have someone in the know have a look inside to tell you exactly what may or …

unplug the router from its power source and leave it out briefly , then plug it back in ,then refresh the network list on the laptop

won't even begin to try and understand any of that ,have a ? why did you not just format drive 2 with winxp cd .and load winxp

try ,opening case and removing ram and hdd cables ect act and then replace them just to re-seat them and try that .,also remove the video card if it has one and re-seat it

[QUOTE=mcportal;673590]I know it's been awhilw, but how did you replace winlogon.exe? I am having the same problem. I can't get into anything just blue screen. Thanks for any help you can give.[/QUOTE] try this first ,boot the winxp cd and do a repair .at the prompt type in chkdsk /f …

when you backed up the mydocuments folder did you get it from the desktop or this file path . C:\Documents and Settings\your User name\mydocuments.

try safe mode see if it works ,hitting f8 on bootup . also if you have another computer in the house you could remove hdd from bad computer and install in other as slave to get the pictures off ,if no other computer ,remove hdd and take to computer repair …

hold the power button in long enough and i bet it will work ,i think that maybe you cpu or even you ram is over heating, you have 1 gig ram is it 2x512 or 1x1024, if you have 2 stick of ram try removing one[and then the other ] …

repair install, [url]http://pcsupport.about.com/od/operatingsystems/ss/instxprepair1.htm[/url]

do the bells and whistles include a good video card ,that meet the games system requirements

it has only one input output . to my knowledge one hole can't be both input and output ,just one or the other ,and if its for the aerial ,then no you will not be able to hook you computer to it

you need to boot to the winxp cd ,and go to R ,for repair and when you cet to the prompt ,type in , chkdsk /r, not there is a space between k and /

just the upper and lower filters

most likely cause is you jarred something loose ,unplug computer and remove and reset,the video card the ram and the ribbon cabe from the dvd to the motherboard things like that

take away the ( i think , but i don't have a answer to the change name thingie

just delete the upper and lower filters from the right column

try unistalling the program ,then make sure it never left a folder in program files on the harddrive .if so delete it ,then run ccleaner to remove dead registry entries ,run the registry scan 2 or 3 time to make sure all is gone .then try reinstall,might help might not …

just for the heck of it over the past few years i have installed different Linux os on many different boards and they all worked .also ran live cd Linux on many different boards all worked for me

maybe Sandra lite will tell you the maker of the mass storage device and you can get the driver from them .worth a try [url]www.filehippo.com/download_sandra_lite[/url]

right click on the screen when dvd is playing usually gives dvd controls!

its impossible to say whats wrong without knowing some more info about you computer ,like the motherboard make and model #.

your only option i think is to right click on the link to the next page and choose open in new window .like gerbil i to only use IE when i have to

[QUOTE=susa;666230]It is very simply work. File replaced by a file with the same name moved from another folder, and it is very likely the replacing file. =========================== susa [url="HTTP://WWW.ASCIITECH.COM"]ASCIISOL[/url][/QUOTE] WHAT!

[QUOTE=Thinka;665366]But for bigger disasters - MoBo failure, fire, deadly virus, worm, a separate hard drive in the same computer will be as useful as dental floss in a beer-drinking contest.[/QUOTE] lol, reminds me of the office fire that destroyed the computer and the secretary purse,no problem with lost data said …

did you turn on file sharing [url]http://support.microsoft.com/kb/304040[/url]

you need a video card /capture card ,plus software to capture video ,in the computer to hook the camera to search video capture in [url]www.google.com[/url]

[QUOTE=stenaldermand;252710]Hi there! I haven't been able to boot my xp machine for a couple of weeks, and decided to "repair" it with the xp cd (SP1) And there wasent no problems at all until the computer restarted like it was supsosed to, and began to install some files, or something …