extofer

[QUOTE=amd_sucks]my forum needs more members whats the best way?[/QUOTE] I suggest optimizing your site, when people find you on Google or Yahoo, they will join if it looks appealing. Also, try blogging or podcasting issues that can help your search. You can send me a private message if you want …

I've started a new site, but I've had the domain for a while, I have my blog on a subdomain. [url]http://blog.company.com[/url] and the blog can also be hit by [url]www.company.com/blog[/url] ... because I had the blog before the site, I submitted the blog subdomain to google and yahoo. I have …

Minister of Denmark

I have the basics down on the VPN, but I seem to have several problem. I have the 4 locations that I can hit, they route to one machine, I use different Ips however, all static. For instance, the first location has IP 10.0.0.2 to 10.0.0.19, next location has Ips, …

I had a similar problem, if her router supports Wireless-A Settings and G it helped me to specify G. Then within G, it also helps to try G Only, B Only or mixed modes.

I've been checking my back links at [url]http://www.iwebtool.com/backlink_checker[/url], I understand the importance of back-linking in site rating, but how can I get the more back links. I tried link swapping, but that can be too dangerous… any ideas? Also, call me an SEO newbie, but how do I get link …

I successfully installed Ubuntu Linux, and I am new to it. When I boot up, I log into a shell, from there, how do I start GNOME or KDE?? thanks :)

Two things, static IPs should only be in the two digit mask 10.0.0.1 ~255 also make sure you not only use the router IP as the Gateway but as the DNS as well

how about a project on "honey pots" Honey Pot security means you set up a server somewhere on-line and TRY to hack it, while applying fixes to vulnerbilities and finding more vulnerbilities

1) could be the ram not letting boot into the BIOS, if you don't hear a beep, it's the ram 2) if the fans don't run, it's the power supply 3) double check the jumpers, make sure J1 is accurate, that's for the CMOS 4) are you running an Intel …

Buttons are made with <form> tags. in it, you specify the destinations when it's presses. As for as rollovers, yes, there are custom bottons in javascript you can use.

What is the Quick and dirtiest way to get back links or a site listed??? Thanks

The US Government appointed an IT lobbyist to Homeland Security Cybersecurity chief. Gregory Garcia will report to Under Secretary George Foresman. Garcia, an information security policy expert, was the Vice President of the ITAA (Information Technology Association of America). What does this mean to the Internet era in the US. …

I'm a developer working on Exchange Server 2007... i need to be able to execute a script upon receiving a new email on a particular mailbox. Can anyone help me out here?? Best regards, extofer

I have a third-party JavaScript that works as a button.... I need to call from that script to a C# function. Is there anyway to do that??

Probably the best way is to avoid the active X. Another problem could be that the Active X is curropted or has a virus on the server side. To turn off Active X, Under, tools >> internet options >> advance Tab, remove the check to allow active X. All Active …

I tried linking to [url]http://www.daniweb.com/directory/[/url] I got a a 403, access forbidden.... and I'm logged in.

Use the length() function and return a boolean string str ("pasword"); if str.length() < 7 { return 0; } else{ return 1: }

Where are you getting the Data From??

What do you want to do with Winsocket and programming??

Is there a legit site that can provide assist in linking you submitted site, FREE or Inexpensive. Aside from backling directories, is there anything else?

It sounds like you might be infected with a virus. You gotta be very careful, recommend the following: [url]http://gabriel.cleverinnovative.com/?p=46[/url]

[QUOTE=SerbOz;839452]If I install Sp2 in my Windows will this affect any of my files on existing Sp1? Will I lost something?[/QUOTE] No, SP@ is only a service pack, it will update operating systems files only, your existing files and programs will remain in tack and will work fine.

Try joining the tables: [code][B]FROM[/B] tbl_Products [B]INNER JOIN[/B] tbl_ProductDetailsText [B]ON [/B]tbl_Products.ID = tbl_ProductDetailsText.ProductID [B]WHERE[/B] tbl_Products.CategoryID = 87 AND (tbl_ProductDetailsText.CategoryFieldID = 670 AND CAST(tbl_ProductDetailsText.CategoryFieldItem AS INT) >= 0 AND CAST(tbl_ProductDetailsText.CategoryFieldItem AS INT) <= 999)[/code]

I'm freaking out here. I installed VM Ware Server, downloaded it directly from the [URL="http://www.vmware.com/download/server/getserver.html"]VM location[/URL], after I rebooted, it locks at my login screen as soon as try to type anything (on the username OR password). I even tried on SafeMode.... anyone ever had this experience.

When you call the the Database, are you using a SELECT statement and a WHERE clause?? If so, what is it?

What is the browser you are using? On the menus, you should have at least a "View" menu where you can enable the toolbars you need. Have you ran a highjack or virus scan?

chr13 or VbCrLf

boot up under safe mode (press F11 or F10 when booting, can't remember) then try running a spy ware check and virus scan, also try a defrag on disk. Sometime, cleaning out all unnecessary junk in your system will work.

This is not a problem, you can do this: write an array of all sheet names (I believe it's woorkbook. sheetname ), then check if you have the name you need. Here are some things I need to know... How are you calling the macro to start? Is the name …

I'm running XP and I have 2 small problems. 1) my right click will not work on the start menus when I try to sort my programs. 2) I accidentally removed the Show Desktop icon on my task bar (I tried restoring defaults) They sound insignificant, but they are helpful …

We have a Linksys VPN Router (WRV200) and I enabled the Log viewer... only I have a few questions: The IP Viewer address should be what address?? Where the external View program is at or any address on the network. What FREE external log viewer app is recomened to use? …

[QUOTE=Augur1019]We have a small network set up in our appartment, using a cable modem, and a 4 port wired router. The four of us each use one port on the router, but I recently got another computer that I would like to add to the network. I found something called …

Are you on a Windows Enviornment?? You can use the Windows remote desktop. You basically have to enable it in all clients first. Then, what we used to do, we had them write a HELP request on an ASP site that emailed us the users IP address. Then you conenct …

What you do is use a seperate IP range to seperate from the network. I would plus a WAP into your current network and assaing the private IP to it, I also suggest you make your network static if it's not already. Then assing an IP to your WAP and …

I'm developing an app with another programmer, both of us are very mobile, I have a Testing a Development Server to add the DB we are building against and we would each pertain a local copy of the source code. How can it be possible to use VSS to synchronize …

Hello. I'm purchasing a new solution software for a business that requires a hefty and secure network allowing only 8 remote locations into the servers. The servers are Dell 2.33 x 2 GHz 8 Gig RAM 1950 systems, running terminal services for up to 25 remote users in various locations. …

Are you using DHCP or Static IP? Can you use the internet on other computers on the network?? First, I need more detail, like what is your infrustructure like. What is your router. Check to see that the gateway is entered correctly, also you might try an alternete gateway.

I successfully installed Debian on a MS VM. When it boots up, at the point it makes it to the log in, the display is distorted. It simple won't show anything but a distorted login screen.... even after it logs in, it's not viewable. Do I make sense?? Can anyone …

I was really recommended Gentoo, but I couldn't get it to install. Is there an easier way to install Gentoo?? What about Ubuntu, can it do as much as Gentoo, or at least Apache and MySQL

Is the game you are talking about an online game??? For that matter, you can utilize the iNet tool

Listen to this Podcast or Stream, even download the MP3 and get a free gmail account if you join. [url]http://www.gabrielvilla.com/support/[/url]

Huh, you again... I just [URL="http://www.daniweb.com/techtalkforums/thread67870.html"]answered [/URL]you right? So, what steps are you taking to learning programming? Theory is key, don't get cought up in languages, learn the structure. Here is a good learning [URL="http://www.catb.org/~esr/faqs/hacker-howto.html#skills1"]lesson[/URL].

What is the easiest way to migrate a project, with about 40 forms, 3 modules, 3 classes, and several designers (Crystal Reports) from VB6 to .Net 2003?? Any ideas?

This is just one man's opinion, but I vote for FireFox. I administer about 20 PC in our business and I been running FireFox for about 1.5 yrs without problems. I have no complains. I tried Opera, but wasn't to found of it, and wne to FireFox when over 2 …

does it have to be a bacth program?? I know of VB code that can retrieve the uses gateway, ip and subnet mask. Then you can ping it...what do you think??

Python is a programming language, is that what you propose to the the front end of the application? if using python, use MySQL database to create your database to save the date and python to retrieve and manipulate it.

Pay per Click means you would advertise with google, and you pay for every time your site got a hit from Google Search or Goodle Ads.... It takes registering with Google and paying for it, that's pretty much it.

I'm trying to config my router to restrict access to ebay, yahoo and other sites on certain IP in my network. Problem I have is the following.... I have 6 IP's that are being restricted access to certain URL.... and 6 that can get anything online. I created 2 policies …

Try 2 Linksys WAP with [URL="http://www.cantenna.com/"]Cantenna [/URL]boosterson them... it's quick and easy.