Posts
 
Reputation
Joined
Last Seen
0 Reputation Points
100% Quality Score
Upvotes Received
1
Posts with Upvotes
1
Upvoting Members
1
Downvotes Received
0
Posts with Downvotes
0
Downvoting Members
0
0 Endorsements
Ranked #2K
~6K People Reached
Favorite Forums

31 Posted Topics

Member Avatar for bilbao

i am not a laptop technician but as far as i know it does not have a fuse, when your laptop does not want to power up you have to start from a point(the power) is it plugged in? does the ac adapters power light come on?(if it has one) …

Member Avatar for james.pearse
0
367
Member Avatar for pgrinion

ok so when you say that it gives a blue screen... when exactly does it give the blue screen?when turning it on? does it boot into windows? is it when you are busy in windows(or what ever os). or do you mean that when you turn it on the screen …

Member Avatar for DM7747
0
184
Member Avatar for airbourne

yes your desktop at home would basicly do the same, it will only draw the power it needs from the psu, thus when the load get higher then the power consumption get higher

Member Avatar for Jupiter 2
0
158
Member Avatar for wedway

when a surge blows a psu and you replace it with a working one and this one blows aswell then you know the system is damaged, this not good as this could mean a new pc(mainboard,cpu,ram) the best is to replace them all at once, ass you do not know …

Member Avatar for Jupiter 2
0
140
Member Avatar for dianejh03

what you need to do is start the pc with bare minimum connected, disconnect every thing except the screen! (disconnect the keyboard and mouse) if it still beeps then you know its internal, then what you do is remove the ram,if the beep stays the same then you know it …

Member Avatar for Axalto
0
149
Member Avatar for sKiTzo

did you update the bios? this is very weird as every thing seems to work except all together! best thing to do is to start fresh again,flush the bios(reset) and make sure to update to the latest version. then shutdown the pc and install all of the memory again and …

Member Avatar for sKiTzo
0
95
Member Avatar for SpaceViking

to cancel out the power button use a screwdriver to turn the pc on, if this does not work then there is either something wrong with the psu or the mobo,seeing as both power supply do not work the that leaves the mainboard, take the mainboard out of the case …

Member Avatar for loki_
0
214
Member Avatar for jaishankar

the quality of the pic are not very good which makes it very difficult to see any thing, as for the audio connection the best thing to do is to search your model number of your motherboard and get the manual,it will tell you exactly where to plug in which …

Member Avatar for loki_
0
137
Member Avatar for jonj0e

[QUOTE=thepastimer;807101]Modern psu's are "idiot proof", so if it doesn't fit, its not the right one, and if it does, its probably the right connector.[/QUOTE] exactly what he said,the cable can only go in to one place,the gpu should have a 6pin connector where as the cpu connector will be eiter …

Member Avatar for loki_
0
198
Member Avatar for nayacalevu

go into safe mode and disable all the startup processes and programs, this way we can rule out any buggy software and then concentrate on the hardware, also start up the pc with minimum hardware(1stick of memory, onboard graphics,one hdd etc)

Member Avatar for loki_
0
116
Member Avatar for Jusar

have you updated the bios on the motherboard?does the bios detect the hdd as a 400gig? is your ide drivers installed?

Member Avatar for loki_
0
151
Member Avatar for reanbeg

yes it most likely is your cpu that is fried nowtry taking it out again and reseting it with new compound(not to much) but if that does not work then i do not know!

Member Avatar for reanbeg
0
169
Member Avatar for ibbeywoox

hey man. the answer to your question is YES it can, when cloning the hdd it will ask you to select the drives that you want to clone, just make sure that you select all the partitions of the drive and then clone! it will clone all the data as …

Member Avatar for ibbeywoox
0
189
Member Avatar for jovaslite

This is normally not a good sign at all as it mostly means that you motherboard is faulty, so the best thing to do is take it to a repair shop and let them have a look, maybe a reflow of the system board will get tit going again(i dont …

Member Avatar for slash77
0
146
Member Avatar for mjohn030

this could be caused by the 512mb that may of been faulty and then when you inserted the memory it damaged the the ram slot! have you tried in a different slot? can you test the 256 in a nother pc to make sure its still working? bothe the chip …

Member Avatar for ahihihi...
0
92
Member Avatar for etcmss

yeah you should be able to unless theres something else wrong with it.but if you that it wont turn on? does that mean with or with out the ac adapter?

Member Avatar for loki_
1
65
Member Avatar for attitude_speaks

well the first thing you need to do is update your bios, because if you bios does not know what cpu it is then windows wont aswell!and this motherboad supports the am2 cpus and the phenom is AM2+, this means that youre board will be able to start the cpu …

Member Avatar for jbennet
0
476
Member Avatar for robin59

remove all the devices from your pc,this includes usb mouse,keyboards,pci devices and even screen cards(if you have onboard) now start the pc up and c if you have the same problem!? if so then disconnect the front usb ports from the motherboard as this could be shorting the mainboard! if …

Member Avatar for loki_
0
147
Member Avatar for nobhobber

do you mean by setting up a peer to peer network between the 2 laptops? well yes this would work if you can still boot into windows, but if this is not possible the no you will not be able to, you will need to place the old hdd into …

Member Avatar for loki_
0
129
Member Avatar for normanallen

download seagate disk tools and test the hdd with that, this should be able to check if the drive is still working as it is suppose to. you could also try running chkdsk g: /r in command prompt!

Member Avatar for loki_
0
1K
Member Avatar for Gdircks64

i dont think that you can do this from HDMI as this is a media format, as for the usb 2.0 it should be fine seeing as you should get about 20mb/s atleast from a external drive. i guest it the only way for you to know if it will …

Member Avatar for loki_
0
106
Member Avatar for webstrand

do you have a pc speaker connected? if so is there a beep?if you do have one and you dont get a beep even when removing the memory then your mobo is definitely dead!if there is a beep then you should be able to fix it wich the means of …

Member Avatar for loki_
0
174
Member Avatar for 1dazza10

hey i had the same problem with my pc when playing COD4 or COD5,would be busy playing and then just like that the screen goes dead,the pc still runs but it does nto respond at all and there is nothing on the screen!(the screen cant even get a signal) after …

Member Avatar for loki_
0
211
Member Avatar for duartejoe

hey ok so i am having a similar problem with my pc, when i turn it on it goes throught the POST but then it just stays on the Asus screen, it does not make a difference if i turn the pc of via hard shut down or restart! But …

Member Avatar for ahihihi...
0
79
Member Avatar for boydcooley

the battery should be the same as the one that you would find in a watch and like jbennet said,it will have a number on it like 2023 or 2010, this will be the actual size or volts of the battery. the problem with the old laptops or notebooks is …

Member Avatar for boydcooley
0
106
Member Avatar for timcripps

if the pc starts up then what you can try is to run memtest on the pc,this will tell you if the memory is working correctly or not and it will tell you if its compatible with the system!

Member Avatar for timcripps
0
96
Member Avatar for Dougie

It is never a good thing to update hardware drivers from MS as i have days and days of troubles with it! IF you have a Nvidia card then get your Nvidia drivers from them, there are a lot of advantages of updating you gpu drivers like performance increases snd …

Member Avatar for loki_
0
181
Member Avatar for masstechteach

when you c that little white cursor flashing it means that it is trying to find a boot device, what you need to do is pull out all of you ide and sata devices(turn the pc of first) then turn it back on and c waht the error message says!? …

Member Avatar for loki_
0
116
Member Avatar for gigglepoot

yes the best way to test a mobo is by removing it from the case(reflow) and then starting it up like that with bare minimum components, this will then cancel out stuff like static from the case or any shorts that the case might be causing! if you still get …

Member Avatar for loki_
0
86
Member Avatar for Tebo

well when your lights and fans come on when you start the pc does not mean that the pc is actuallu working,this just means that your PSu is working and that those components are receiving power! If you do have a pc speaker which should be able to tell you …

Member Avatar for loki_
0
95
Member Avatar for wadintennis

if you got a memory dump error the first time and now your pc does not switch on anymore then i would suggest you try a different mem module! this should give you a pretty good idea of what the problem is? if the pc comes on with different memory …

Member Avatar for loki_
0
134

The End.