Posts by caperjack

where are the links for some good spyware and what is its use... ?

James Partagas Cigar

in my post #2 ,link to virus forum ,and in the readme stickeys you will find all kinds of links for all kinds of programs

The Dell driver worked. Thanks.

your welcome

installed a 512 agp card with nvida 6200 ,win7 loaded microsoft drivers ,seem to work ok ,i updated with nvida win7 drives ,seem to work ok, shut down computer ,next time i turned it on it had issues and did a system restore ,so im now using microsoft drivers again ,will try it for a few days and update again to see what happens

yeah ,firefox can be funny like that

Yes, that was the first thing that I tried before resorting to ATI or even third party sources. When I try to download the driver, it instead forces me to install a "Dell Driver Download Manager". Once that's done, it instructs me to add the drivers that I want to my list, which I have done, BUT it won't recognize that they are there, and I've yet to find a work around on that site. Could it be that the download manager is not liking 7 for some reason? Is there another source for that particular driver?

i chose vista as os ,go to the video link at the bottom open it and click on download for ati driver and it gave me an option download mager or download with browser ,so i chose browser over download manager and it downloaded for me

i get a virus on my computer when i try to install a new antivirus he just shut down

how do you tell if a computer is aHe!
hi check the virus /spyware and othere nasties section of this fourm fo help with viruses click link below ,read top sticky notes first good luck .
http://www.daniweb.com/forums/forum64.html

hi Dell site for your model laptop shows lates driver for Vista 32 bit as 5/21/07 - 8.36-070314a have you tried that
http://support.dell.com/support/downloads/driverslist.aspx?os=WLH&catid=-1&dateid=-1&impid=-1&osl=EN&typeid=-1&formatid=-1&servicetag=&SystemID=INSPIRONI6400%2FE1505&hidos=WW1&hidlang=en&TabIndex=&scanSupported=True&scanConsent=False

Related question...I have a Dell Inspiron E1505 which I found has a Mobility Radeon™ X1300 video card (based on the service tag). According to every source that I've found on the matter, including the Dell and Windows 7 websites themselves, the 1XXX series is no longer supported, including for Windows 7. So, my question is...Will there likely be a driver released to enable full compatibility with Windows 7 at some point in the near future by an independent source (or, for some reason, Dell or Microsoft), or am I just going to have to live with the crappy resolution that I have to deal with right now?

As a side note, I also found that some Vista drivers are said to be fully compatible with Windows 7, but I have the most recent version for my adapter. That must be for supported adapters, though, right?

Thanks for your help.

so you have the latest vista driver install on win7 ,correct ,did you right click on the desktop ,chose screen resolution/advanced settings/monitor ,check the refresh rate ,what is it showing ,maybe it need to be adjusted up or down

windows 7 amazing but I'm not able to find drivers for it

drivers for what devices ,if the device has a win Vista driver listed for it that should work in win7

Windows 7 is faster than Vista and its proven.
for detailed info: http://windows7.iyogi.net/

for sure but that was not the question in this thread

i have broplem whith my laptob windows SE and i want to change the languwich

you just did .lol
in control panel ,go to date and time and reginonal and language settings

Though so. vivek01anand did not mention his registry when he said what all he had done and I do know the registry can influence the speed that programs open, which was his complaint. You keep your reg clean so it would not make a difference.

ok, now i get what you were getting at ,you are correct indeed

Hi, i cant imagin how one would be faster than the other ,as in my opinion what on the page you are going to detemines howe fast it loads .
and i don't under stand your not lining tabs as it was one of the biggest reasons people like and made the swithc to Firefox ,maybe just a miss use of the scroll[ to scroll is to move page from top to bottom or left to right ] on your part but you can quickly go from page to page by simply clicking on the tap across the top of the page in the toolbar

Have you run any other reg cleaner before it?

sure ,before and after ,i usually just use ccleaner for registry ,and ATF cleaner for removing temp files,

Hi caperjack. Try this address for Radeon 9200 vista drivers.

http://www.bioticaindia.com/radeon-9200-vista-drivers.html

Hope it helps.

thanks,but from what i see when i click onit it wants me to buy the driver .i will wait and buy new comp and video card

Download Advanced windows care for IOBit

www.iobit.com/advancedwindowscareper.html

It will clean the registry, spyware and temp files on your pc. Should increase the speed. If the registry is bloated it will slow down your pc.

,i installand ran this program and all though it cleans well it helped none in the speed of my computer ,thank you

I am having problems during installization in my PC while i install window 7.
It is very much difficult to having problem during installization .
Isn't there is easy way to install window 7 .

hi,,first you didn't even tell us what problems you were having .
easiest way it to put the win7 disk in the cdrom drive and boot computer and follow on screen prompts

your a ahucker allright

you first need to make sure you ystem is ready fior it,compatible with your hardware .my suggestion is it best to buy new system with win7 on it,unless you system is reletively new and is Vista compatible

Yeah i got Win7 via MSDNAA it runs well on my P4 too

yeah ! I installed the 90 day trial win7 for corprates on my Dell demention 450 with a 2.8 Xeon cpu and 1.5 gig ram and it ran really good on that

That's awesome! I was so happy about getting Windows 7, it is really good.

Congratulations on winning as well.

thank you

I wrote a small article about it ;)

http://cohenl.info/blog/microsoft/windows-7-article/

yeah, same stuff in mine ,no balloons and streamers .just the same junk you have .i also only signed up for the win7 dvd's . i found out about it through the Microsoft MPV program ,the story on that one starts awhile back i was contacted on this forum by some saying they were part of the mvp program and wanted to nominate me, i guess so many Canadians get nominated ,first i said no[also didn't think i qualified and still don't ] thinking it was maybe a scam ,but was assured it wasn't ,so i agreed .so i got nominated ,for my helping here on this forum ,i told the guy i was just a good Googler!lol, my prize ! i received a 150.00$ certificate for the online Microsoft store , and a one year subscription to Microsoft netlife, the magazine and the website ,vale over 300.00$ the site gives me access to all microsoft software and Os's from 3.1 on ,with working keys even download . i have a fully working 90 day trial of win7priemium anyway a long story short ,its all a bit over my head ,and im the first one to admit it ,most nominee are IT people.not me

https://mvp.support.microsoft.com/gp/aboutmvp

i would contact dell they might know

I got win 7 the same way.

Probably because the computer is so old, you will need at least windows vista drivers. I found that out.

and baloons and streamers and a puzzle.lol

yeah i looked a bit and all i found was info on using winxp drive ,and installing it using compatibility mode .ATI site has none even for Vista for my old card , went out shopping yesterday for new computer ,still looking

Thanks I will look at the pin and see if it is damage again thanks for the info.
Stan

your welcome ,good luck

I have a program that is not in add/remove programs that is in control panel called"Safety Center". but I can not delete the program. Can some help how to delete it. Tkx

hi please start you own thread in the spyware/virus and other nasties section for help removing this problem .
http://www.daniweb.com/forums/forum64.html

Thanks caperjack
I found that this is my case also and I will have to solder the jack back to the motherboard.
Stan

yes ,but check the center pin of the jack ,mine was burnt off ,so i replaced the jack, but when the guy soldered it for me noticed this it was after new one was installed ,he said he could have just re-soldered the pin

I reinstalled ati drivers through device manager,driected it to the ati/support folder on c:\ put there by failed ati catylist install ! will see how that works

did not help ,still bsod,

yeah they are not cheap i have 4 stick in the shead ,forget actuall the size ,but i think they a re pc800 64 meg each ,but could be pc600 's

I reinstalled ati drivers through device manager,driected it to the ati/support folder on c:\ put there by failed ati catylist install ! will see how that works

had to uninstall ati xp drivers ,kept getting bsod screen because of a ati dll file ,

I made a mistake once...

me to,in 1996 I got a 486 computer for my daughter ,she
didn't like it so i got into it ,so as not to wast the 750 dollars i paid for it .nuff said

the deel.com you told me to go to is some fake search website so not sure what else to do

sorry typo .shold have been www.dell.com, sorry but you own the dell and should have caught that one

Got my free copy of win7 the other day ,got it for hosting a win7 launch party http://www.houseparty.com/windows7usa.
Problem is im istalling just for now on my old P4 2.8 1 gig ram
runs really nice, it took only 28 min to install from start to finish .on a new 80 gig harddrive ,not formated .like tha t little snipit tool ,will be great for here ,when people want to snip a part of the error mess and post it in a thread for a helper to see
missing some drivers .lke video controller and a motherboard chipset drive .
anyway likning some of the features i can use .
got my old audgity 2 sound card to work ,using the cd that came with it .
will not spend to much time trying other drivers ,hope to buy a new computer soon anyway ! thanks for listining ,enjoy win7 i will

edit ,installed ati 9200 drivers for winxp ,in xp compatability mode ,but the graphics were choppy and grainy .standard vga was better,but then changed refresh rate and it looks better now

im trying to get the driver for my standard VGA graphics adapter working but nothing helps, ive downloaded and re installed it 5 times so far and its still showing me an error, any help with this problem would be appreciated thanks

Dell inspiron 1525
Intel celeron cpu 560 @ 2.12Ghz
1 gig of ram
32 bit operating system ( windows vista )

hi,no standard vga graphics is what vista is using ,you need to find out what video adaper you have and install the drivers for it.
go to deel.com and use you service tag #,should be on you computer case somewhere ,you should find video controller drivers that way

Caperjack, He is from the Philippines and speaks Tagalog, can you speak that as well? LOL

off course ,first need take time how to say lol

Caperjack speaking Russian, you never fail to amaze me!!!!

lol,good translating site ,i told them nicely not to post in other persons thread .

Помогите я не могу понять что это за файл? из-за него у меня не получается установить винду!! (a8rs92h6.sys)

привет ты не предположить угнать другую должность люди Спасибо

Помогите я не могу понять что это за файл? из-за него у меня не получается установить винду!! (a8rs92h6.sys)

translated .

Help I can not understand what this file? because it can not I install Windu! (a8rs92h6.sys)

I have a Compaq Presario v2000, sn CNF55116NW , Model EP378UA#ABA. My AC adapter connector end, the end that connects to the PC, melted the yellow insert in the connector. I noticed that I can run the laptop with the battery out and the AC plugged in and there is very little heat. However if I put the battery back in and it begins to charge after about 15 or 20% of charging the end gets hot and after about 40 or 50% the end is extremely hot. I know that when the PC is in use and if the battery is charging and the PC is being used the AC adapter will heat up but to have the connector end to melt the yellow insert appears to be way too hot. When the battery reached full charge the connector cooled off but when I pulled the connector end out of the PC it was stuck, hence the melted insert. The battery ran the PC OK and the charge dissipated about 15% in about 20 to 25 minutes. Could my battery be bad or is it the motherboard?
Thanks Stan

hi, i also have a Compaq Presario v2000 and earlier this year it did the same thing ,actually it was my daughter who used the laptop at university ,and she used to jam the back of the laptop where the plug is against the back of her desk and she broke the power jack away from the motherboard ,so …

sorry for the double post but I forgot to add that my backspace button on my keyboard doesn't work either, I have NO idea if that is anything to do with anything but still

hi a little more info ,what windows are you using and that motherboard model # doesn't seem correct

hi,reading most of the post to try and figre out what it might be ,
this is from post #5
Bobs question,Have you been able to play it OK before this event?
your answer
Yes, first its ok then it go slow then smooth and then slow again.
i thing bob meant did this game play good say last month or last year even,not when you first turn it on .
so when did you install the game and has it always acted this way

never mind i see you posted in the vista section

or you could at your own risk try winsocfix! i have used it many times with out problems
http://www.snapfiles.com/get/winsockxpfix.html

try safe mode ,f8 on bootup .if you get in uninstall cakewalk

No mate, after reading the links u provided with some links i found I wrote that simple article to make things easier for people who will search for it in the future.

Sure it makes sense and thanks to you ^^

now it does .good luck

btw, I've wrote a very simplified article about ARM processors and some nice information about their features....etc

that makes absolutely no sense to me,thought you were looking for help .!!!

Thanks again mate :)

.
your welcome

And this is not a HW this is for me to read so that I'll be able to participate in class with others.

hi doesn't where you read it its still hw .lol
good luck finding what you nee, if i knew anything about what you need i would google it for you.
seems to me anything you read would be of benefit .like this and click on the links with the article to find more info
http://encyclopedia2.thefreedictionary.com/Advanced+RISC+Machine

this is where i started www.google.com this is what i got ,has to be info in all this for you to study .
http://www.google.ca/search?q=ARM%2C+Advanced+RISC+Machine&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a

go tp computer store and buy a pci network can and install it ,and siable the onboard one in device manager