This looks very straightforward. Install the software from the CD, then insert the card and follow the prompts. You'll need to know what kind of encryption you have, the key, and the SSID. What problems were you having? The documentation is here: http://kb.netgear.com/app/products/model/a_id/2569
First, see if this hasn't been done already. Open Network on the Ubuntu box and see if you have a share defined. If not, right-click to share a folder. Open Network places on the XP box. Windows network. I believe Ubuntu defaults to Workgroup, and you should find your Linux share in there. You can edit the Samba config file to change the Workgroup: http://www.linuxquestions.org/questions/linux-networking-3/how-to-network-ubuntu-to-and-xp-network-454120/ Or, just change the XP workgroup name to "Workgroup". This is much easier than it used to be.
"Should I install Vista on my new SATA HDD, plug in my PATA HDD to the system & expect to have access to everything?" In a word, yes. XP Programs won't work of course, and you need to be sure the Vista HD is set as the boot drive. You'll probably need to take ownership of the XP files.
Rt-click on the rectangular space next to the drive name to get the format option. It probably shows as "unallocated". You can also format from the command line.
There's no problem that I know of, except to exercise care not to mistreat the drive while moving it around. You might find a 2.5" portable more convenient.
I think you're just asking for trouble-if you hijack someone's desktop, you're probably going to get lots of tech support calls asking how to get rid of it. Why not just an image with your logo and site URL like most manufacturers.
I don't think so. The boot drive must have the windows OS on it. You'll need a floppy drive to make this work. (Press F6 to load driver). Read this before you proceed: Why RAID is (usually) a Terrible Idea http://www.pugetsystems.com/articles.php?id=29
It's safe enough, but it's not likely to work. If you have an install disk you may be able to do a repair install, but you'd do just as well to do a clean install. Your ME computer will probably run Ubuntu, which would be a considerable improvement over ME.
I applaud you for having the curiosity to try this. You probably need to remove the partitions first. Open disk management and rt-click to delete the existing partitions, then re-create. Format should then work.
But, realistically: "Why RAID is (usually) a Terrible Idea" http://www.pugetsystems.com/articles.php?id=29 This will make more sense when you've had a couple of RAID failures, as I have.
What make and model? This appears to be a Modem/Router combination. In most cases, you'll need to access the Router's Web Interface to set up your wireless config.
Did you read it? "It is always best to format a drive when installing a new motherboard, especially if the new board has a different chip set than the original; VIA, INTEL, AMD, NFORCE ..." If he's lucky, a repair install may do it, but see jbennett's response also.
I was changing cases, and the Ethernet port had failed some time previously. At that point I had washed many keyboards, so I said, why not? The port works now, and the board has been running well for 2-3 years since then.
My goodness! I have put motherboards (Complete with RAM and CMOS battery) and keyboards in the dishwasher and reinstalled them with no problem at all. Many electronic devices can be cleaned with water with no ill effects. Drying is important, of course, but 24-48 hours in a draining position will suffice.
Just put in the Vista DVD and reboot, changing the boot option to CD/DVD drive and follow the prompts. Delete the existing partition and format NTFS when prompted.
"Loading/installation? Are you sure that's not just the Autorun feature? Right-click this drive in My Computer and select "Explore". You mentioned an XP machine, so I assumed you had two computers available. You can try exploring from disk management as well.
"When plugged into an XP machine it loads as an internal drive - not an external device" That's not possible, so you're misunderstanding something. What makes you think this is so? The easiest way might be to connect this drive to the XP machine, share it, then open it on the Vista machine.
I've seen this happen when important files are missing. What have you done recently that might have caused this, like spyware removal or registry cleaning? Can you boot in safe mode?
Listen to jbennet, as he's got it right. A router makes this exercise a piece of cake. I agree with the Linksys recommendation as well. Forget the switch-you won't need it. NAT routers have a hardware firewall that's better than any software firewall, but you probably want both. Yes, to NAT and DHCP. I'm sorry, but you must pay in pounds or Euros. To remove a computer from the network, just unplug the ethernet cable, or disable the adapter in Control Panel/Device Manager. You may wish to look into "Hardware profiles" for this.
Look at your memory numbers: 256 + 256 = 512. Report shows 384 (256 + 128) Check this out, and upgrade to 1 GB while you're at it. See if ATI has a driver update. Check Windows Update for drivers and other updates.
