Posts by caperjack

http://www.google.ca/search?q=virtual+com+port&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a

I'm wondering if Adobe has a feature where you can take away the print option from File>PRINT the print is grayed out.

if you mean adobe reader ,i dough it ,if you mean a full version of adobe writer ,i think it has features to used to prevent the file from being printed and edited by others when the file is being created !!
.

Download Malwarebytes' Anti-Malware (http://www.majorgeeks.com/Malwarebytes_Anti-Malware_d5756.html) to your desktop.

* Double-click mbam-setup.exe and follow the prompts to install the program.
* At the end, be sure to checkmark the Update Malwarebytes' Anti-Malware and Launch Malwarebytes' Anti-Malware, then click Finish.
* If an update is found, it will download and install the latest version.
* Once the program has loaded, select Perform full scan, then click Scan.
* When the scan is complete, click OK, then Show Results to view the results.
* Be sure that everything is checked, and click Remove Selected.
* When completed, a log will open in Notepad.
post the log back here

My brother cracked open the sealed unit and managed to solder it and get it working to burn the data on cd. Thanks for all the responses everyone, they saved me from a whole world of stress! Note to self...back up your pen drive immediately!!
Cheers

great news ! gotta like it when someone gets takes the bull by the horns and gets it done!!!!

download firefox browser and try it .
www.firefox.com

it would require you having it removed from the case and taking it apart .cheaper to buy a new on maybe,as it may not even fix the problem

http://www.file.net/process/drvnddm.sys.html

plug in the device ,right click on my computer ,g ot oproperties ,hardware /device manager /bottom of the list usb devices ,see if one shows up with yellow ! mark ,if so double click on it ,go to reinstall drivers and direct it to the usbpar34.vxd file on the disk to install the driver

dvd drives lens reads dvd and cd differently ,its possible as jbennet has said bad dvd drive , lens is bad/weak not strong enough to read /burn dvd anymore,18 mnts is along time if you burned a lot of dvd over that time.
also you maybe able to try cleaning the lens with cotton swab and rubbing alcohol

Thanks for your suggestions. The drive is already optimised for quick removal, with write-caching disabled. .

yup, so is the one that i have the problem with .mine is actually a usb external case with laptop drive in it ,no swapfile on it

then once advised that we should not help, raised a point with copperjack...

and i since changed mt opinion on this issue ,will be helping anyone who asks , untill someone kicks me off this site

for me when this happens i just go to start and log off ,then log back in and it will then let me shut it down .I don't know of any software program to fix it sorry

hi everyone i have a small problem? my start up is slow when i log onto firefox

do you meant firefox is slow to start when you first click on it ,if so ,does it open quick the next time you go to open it after closing it for awhile ,,say an hour later, if yes so does mine ,i consider it normal ,

perhaps you should have searched the printer model#
http://www.epson.com.sg/epson/compatibles/compatibility.htm?dc=1&mode=3&catid=4&pid=1373

www.google.com

I got to the uploading.com site, there was no obvious link to the combo fix program (no "hand" when I moved the mouse over the download area. Now, if I try to go back to that site, it's blocked - it's like this virus is alive and learning as it goes.

click on the "Download For Free" Bar,wait the allotted time, then click download file ,

The built in Ethernet did not connect to the internet when I plugged in the cat 5 cable.

correct drivers are not installed for the device ,check device manager for errors in network section

http://jlhep.blogspot.com/2008/02/getting-rid-of-ufoexe.html
link in first post ,might work but i cant say for sure ,it worked for 2nd poster .
and if the file is on the thumb drive then you all ready infected you computer with it ,i would think

http://www.uploading.com/files/3V63NAVD/ComboFix.exe.html
try to get combo fix here .a little slow ,but !just click on the free download.
follow crunchies direction on it use !

Sorry ,I would love to help but you are trying to do something way over my head .But i like searching and reading what people like yourself are trying to do ,so my search finds this about Parallel posts and i/o stuff looks interesting .
http://www.beyondlogic.org/spp/parallel.htm

also this one .
http://www.lvr.com/parport.htm

you should check out the programing section of daniweb .
http://www.daniweb.com/category2.html

ironic ,my auto play stopped working awhile back ,just didnt bother fixing it will try tool 1 thanks

how do i reinstall

by click on the kwtbaim. exe!

and uninstall the kwtbaim.exe -

go to control panel /add and remove programs .

Sorry after STOP the first reference is 0x000000D1

http://support.microsoft.com/?kbid=839876&sd=RMVP
the above link comes from this site ,clcik on d1 on the right hand side .might be of some help!
http://aumha.org/a/stop.htm

i would also try using the barts cd of the windows cd to run a "R"epair and used this command "chkdsk /p/f "

did it allow you to do check this setting .!!
==================
1. Insert the BartPE CD into the drive, and boot the system from the CD. Once the file loading phase is over, the Bart PE desktop will be visible, as shown in Figure 1.
2. Type Regedit.exe in the prompt, and press Enter. Select the HKEY_USERS hive
3. From the File menu, choose the Load Hive option. Browse to your Windows installation drive, for example the following location:

C:\Windows\System32\Config\

4. Select the file named SOFTWARE (the file without any extensions), and click Open
5. Type a name for the hive that you've loaded now. (Example: MyXPHive)
6. Now the SOFTWARE hive is loaded, and present under the HKEY_USERS base hive.
7. In order to fix the Userinit value in the loaded hive, navigate to the following location:

HKEY_USERS \ MyXPHive \ Microsoft \ Windows NT \ CurrentVersion \ Winlogon

8. Double-click Userinit and set it's value correctly. Example: Set it's data as follows:

C:\Windows\System32\Userinit.exe,

(Include the trailing comma also. The above assumes that Windows is installed in C:\Windows, and Userinit.exe file is actually present in the System32 folder. You may want to verify that as well.)

9. After entering the correct data, you MUST unload the Hive. To do so, select MyXPHive branch, and then in the File menu, choose Unload Hive. It's important to note that you'll need to select the MyXPHive branch first, …

did yo uget the Bart'sPC file to create a xp boot cd and edit the registry as to instruction on this site you posted above .
http://windowsxp.mvps.org/peboot.htm

I actually have a good number more of these... all identical. I need to actually find a system to install them in and see what they come up as....

So you think they might be a prototype?

just a thought ,as when you search the numbers you posted ,most if not all results are of this thread!

PROTO 1 , PROTO BUILB this on both cards is interesting ,prot type .proto build ,mybe just that and you got the only 2 ,with those numbers on them ,actual builds have different numbers maybe

Hmm... Unless something was fried by the heat.

could be ! actually you don't need to take it apart ,buy a can of compressed air and blow it out from the outside

i have been working on computers for 9 yrs now ,i don't own a wrist strap and have never fried a stick of ram or a motherboard by not wearing one .unplug power source ,hold down power button and , as long as you ground yourself to the metal case first ,by just simply grabbing the side of the case you should be alright.
=
when you opened the box to check the ram did you take it out ,if yest take it out again and replace it like jbennet said ,also check to make sure you didn't knock any wires /cables loose,especially the front panel connection

how about over heating ,have you had it cleaned of dust and dirt in the heatsinc and fans,it doesn't take much dust to cause it to over heat

i turned the computer off and retired it

what does that mean !
When i retired my old p166 ,i unplugged it and threw it in the garbage

try the suggestions here in post #2 .
http://social.microsoft.com/Forums/en-US/genuinewindowsxp/thread/33e1e024-23d8-4f1b-8f39-96d13b026d6a/#page:1

as long as its not the via chipset ,then you would need the Via ac97 drivers ,also could have been ac97 highDefinition 5.1/7.1 drivers needed !with out the MB name its only guessing !

Are there people who can sort that kind of thing at all?

its possiably just broke ,wore out no way of fixing ,but its also possible that one or more of the 4 connection to the MainBoard is broke away from the MB,if you can take it apart to check if solder is broken ,i have a usb wireless device that is broke away and i took it apart to solder the joint again !now it works

according to this sites info you board only supports up to 333 ram , 333 translates to pc2700,so the pc3200 will only run at pc2700's speed , what does bios screen show if you install one of the 1 gig sticks

http://www.intel.com/support/motherboards/desktop/d845gvsr/sb/cs-008824.htm

also try this program to check ram ,it will show the ram in each slot and what speed it reads at .
http://www.cpuid.com/download/cpuz_148.zip

Im having the same problem, and tried 3 different dvd drives... all fail to be recognized by XP.
Tell me ig you find a solution.
chris

Possible Solution......go to Start /run/ type in ,regedit.and do the following, go to file and backup registry first before changing

There are 2 reg keys that can screw the device......remove them both and reboot......

The keys are:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325 -11CE-BFC1-08002BE10318} - "Upperfilters" and "Lowerfilters".

Hi,
Yes, I know it's the mainboard. And yes, I have a degree in electronics. But now I'm a bit stuck.
TIA

if you know its the main board what are you stuck at !
the only degree i have is a temp of about 102. cause by the flu i have .lol

Another option is using data recovery style programs if you don't want to physically remove the drives. I use Selkie Rescue (http://selkierescue.com) personally. It doesn't matter if windows is working or not and will connect through a network or cross-over cable.

good idea im sure ,but there was no mention of looking to recover data ,just swapping drives .

also just like to say it might work as i suggested but if you bsod is caused by bad ram there would be no point in changing drives

results of debug .looks like ram problem

Microsoft (R) Windows Debugger Version 6.9.0003.113 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Documents and Settings\Jack\Desktop\Mini102408-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: C:\WINDOWS\Symbolssp2
Executable search path is: 
Unable to load image ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
Windows XP Kernel Version 2600 (Service Pack 2) MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Kernel base = 0x804d7000 PsLoadedModuleList = 0x8055c700
Debug session time: Fri Oct 24 10:26:40.859 2008 (GMT-3)
System Uptime: 0 days 0:07:00.556
Unable to load image ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
Loading Kernel Symbols
.......................................................................................................................
Loading User Symbols
Loading unloaded module list
........
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000000A, {e1883094, 1c, 0, 804fac65}

Probably caused by : memory_corruption ( nt!MiWaitForInPageComplete+2d6 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: e1883094, memory referenced
Arg2: 0000001c, IRQL
Arg3: 00000000, bitfield :
    bit 0 : value 0 = read operation, 1 = write operation
    bit 3 : …

also you should start your own post ,posting to the end of a post thats a few yrs old doesn't get the best help as most posters don't read older threads

maybe tray a different version .
http://www.filehippo.com/download_limewire/

I have had the same issue before. Its something to do with the registry.

and this is the reg fix need ,it may or may not be the fix!!!
--------
Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)

Possible Solution......go to Start /run/ type in ,regedit.and do the following

There are 2 reg keys that can screw the device......remove them both and reboot......

The keys are:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325 -11CE-BFC1-08002BE10318} - "Upperfilters" and "Lowerfilters".

don't have a fix for this but do have a comment as usuall!
this on kellys corner and other links here and within kellys corner "restarts at the Welcome screen" are referring to when you actually click on a user name at the welcome screen to enter and then the computer reboots ,
and the links to post by Yzowl: cure didn't actually didn't fix the problem for those who tried it

So the post here do you get to click on a username at the welcome screen !!?????????????

yes and no,it could be psu getting bad ,make sure the cpu's heatsinc and fan are on correctly ,make sure there is thermal past on the cpu !

sounds like the power jack is bad/shorting out

lucky guess on the drive! LOL
like it says on the site that was linked .from link
========
Audio drivers available for download from the Realtek website are general drivers for our audio ICs, and may not offer the customizations made by your system/motherboard manufacturer. To be sure you obtain the full features/customizations provided in your original audio product, please download the latest drivers from your system/motherboard manufacturer's website.

, but I am clueless as to why it won't go the other way....

yeah ,me to ,gotta be something wrong with the new ram ,maybe unbuffered when it needs' to be buffered or vice versa

because they are the same you should be able to it ,i do it with 2 older Toshiba's that are the same

sorry totally missed that one !
you should be able to find the sata drivers on the cd for the motherboard ,put it in ,then go mycomputer right click on the cd drive icon and go explore and look for sata drivers to copy to floppy to use