2,228 Topics
 | |
| | i used the command : sudo /etc/init.d/networking stop in ubuntu 12 Now this command has not completed , remains active even after reboot and continues to stop a network connection a few seconds after it becomes active. i looked at ps aux but i'm none the wiser. How to eliminate … |
 | Help. I cannot install d/l'd upgrades. Can I reset this device to zero? Is the smaller inaccessable partition to location of the restore?  |
 | Hi, I'm pleased to be able to join a great community like Daniweb. I just started exploring Ubuntu Linux system. Hope to learn more. For a start, I got stuck after installing Ubuntu Server 13.04 on my IBM x3300 M4 system. Everything was fine during the installation until the system …  |
| | Really odd behaviour when you attach an image to a post. There appears to be two images the bottom one appears fine (under the **attached** post header) but the one embedded in the post exhibits strange behaviour when you mouse over it. It jumps around. I've test this on ubuntu … |
| | hi, I am using Acer aspire 4730z and Ubuntu 12.04 LTS left speaker is not working and it is working in windows 7 give me valueable tips thanks in advance |
 | Hey guys, I have problem in my server dns in resolve.conf keep reseting after upgrade or reboot what should I do to stop this ?  |
 | Hi all, I am having serious troubles connecting my laptop to the tv. I can do that with windows ok, but not in the linux. Somebody suggested to install bumblebee http://eternalvoid.net/tutorials/linux-optimus-gt650m/, which I seem to have successfully done. I think the reason was because my laptop had the nvidia drives … |
| | I was struggling to find a good place to put this one, should it go in the Linux forums, should it go in the Windows forums? Anyway, networking seemed like as good a place as any so here goes: I'm currently setting up a SAMBA file server which I am … |
| | Hi, what are the essential steps have to be done before installing eclipse j2ee on ubuntu manually give me valuable tips, thanks for your time.  |
| | Does there exist a basic up to date tutorial on writing compiz plugins? Smspillaz wrote a great tutorial on the subject, but it is getting out of date as both ubuntu compiz move on to newer versions. What are the latest compiz packages to install? (I've seen a lot of … |
| | Hello, I've finally gotten around to setting up my backup and file server, inside it has a set of hard drives which I've recovered from various computers. The drives are all in good condition, and are sized as: * SDA - 320.1 GB * SDB - 250.1 GB * SDC … |
| | Hello Daniweb, I've just purchased a new laptop, an Acer V3-571G which has an advertised battery of up to five hours. Obviously this is going to be dependant on what you are running, but even when using Ubuntu 13.04 to simply browse the internet, check emails and do some word …  |
 | I've had several people ask me what I think the best, top, most user friendly, ultimate, and so on distribution is--so now I'm publishing my Top 10 Linux Distributions in reverse order of preference. Ease of installation, commercial support, community support, updates, administrative tools, stability, performance, and to a lesser …  |
| | How to install Ubuntu on windows 7 with out distrubig windows kidly give me valuable tips.. thanks for your time  |
| | I downloaded ubuntu-12.04.2-desktop-i386 iso.Then i burn it to a DVD.But i can't run it as a live cd on Windows 7.I changed the bootable device oreder of BIOS also.Why is that? Thanks |
| | I have Windows 7 in my primary partition and I installed Ubuntu 13.04 in the second partition. I deleted the Ubuntu partition and kept windows 7. Now the next day when I try to start my windows 7 I get an error: error : no such partition. grub rescue> How … |
| | hi i have recently installed Ubuntu 13.10 in virtualbox windows 7 ultimate 32 bit, in terminal I tried to enable 3d accelration but it was not successful, and when the virtual box restarted there I cant able to find side bar(quick lauch bar) I tried in many ways to recover …  |
 | i use canon ip100 printer but it wont work properly with my pc (linux-ubuntu) i need sugestion and advice |
| | I having soap request and response xml in seperate file. i need to parse it and get the data from soap xml file. using C program I know it is possible with libxml2. Is it there any other way to parse ? Is there any facility available in gsoap to … |
 | How I connect zoom altra modem setup in ubuntu/linux?  |
 | Hello. As a Software Engineer I admit a slight lack of knowledge with hardware. I am usually quite good with any hardware that is contained within the case, my issues lie in networking. Usually I fix my own computer problems, but now I have a couple networking problems that I … |
| | Well, my laptop is rather slow... and it's missing the 'Zzzzzzzzzzz' key (woops... stupid thing). My current computer is a Fujitsu Siemens Lifebook A Series (AH530), it only has 2GB of RAM installed and a 250GB HDD making it unsuitable for anything heavy handed, and it has a dual core … |
| | Hi All, we have built web site in PHP, Mysql Database and Apache web server. Site is running fine on localhost(Window) but when we try to deploy it on our test environment (ubuntu 12.04.2 platform) .htaccess is not working. I am not getting any error like 500 Internal server error …  |
| | i have 2 files, one file created on Windows and another was made on Ubuntu, i want to use this command: comm -12 file1 file2 how do i do that? |
| | Hello, I am sharing my webserver with a few people (it's my server) and I am trying to create some sort of an admin panel for them. It has to be able to change Apache VirtualHosts and reload Apache. Now I can make the config-changing PHP code, but there are … |
 | SELECT getdatabaseencoding(), current_setting('client_encoding'), current_setting('lc_ctype'), current_setting('lc_collate'), version(); returns UTF8 UNICODE C C PostgreSQL 9.1.7 on x86_64-unknown-linux-gnu, compiled by gcc-4.5.real (Ubuntu/Linaro 4.5.2-8ubuntu4) 4.5.2, 64-bit select lower('ČĘĖĮ') returns ČĘĖĮ Actually what I want is to seach surnames with ILIKE which is not working for those chars. WHy this can be? |
 | Another question here. I installed Ubuntu (12.04 I thing, the ones with the LT support?), was previously using Windows 7. Now when I boot, I get the option to use Windows 7 or Ubuntu, but when I select Ubuntu nothing happens - just a black screen. I then have to …  |
| | I am (student) just switched to linux working on NoC (noxim) simulator in ubuntu 12.04 c++ is supported assignment from university, I want to make a script that call my whole program multiple times (for loop= e.g 10) and want to take average value from the functions that were called … |
| | Hey there guys, I have a strange problem, I have many linux servers (ubuntu) I have a script installed on them all servers works fine but one server dont keep login information, everytime I logged in its says hello to server then back to previous page wothout logging in, I've … |
| | I am working on NoC simulator in ubuntu 12.04 c++ is supported, I want to make a script that call my whole program multiple times (for loop= e.g 10) and want to take average value from the functions that were called from other files. Should I create a new file … |
 | I just installed Apache on my Ubuntu 12.04 and set it up to run with my domain name. Everything is working perfect, with one qualm. Though my site is up, and when I type mydomain.com/index.html, the index page loads, or suppose I type mydomain.com/directory, the index.html page in that directory … |
 | I am using Centos6.3 as Server and Ubuntu 11.10 and Linux mint 13 as Cilents. I am in need of a package that to send a Popup alert message to all my LAN Clients in a group & by individual using IP address from Linux. Help me regarding this... Thanks … |
 | Hi all, I'm using crontab on Ubuntu 10.04 and I have had 7 tasks running smoothly for about 6 months. I've now created a new script but for some frustrating reason it will be execute. It's a small task that needs to run every two minutes. The issue doesn't reside … |
 | Hi All, Not sure really where this should go but..... I have recently setup a shared HTDOCS under XAMPP across a dual boot system (Win7 & Ubuntu). Not sure if there is an interest, but if anyone would like to know how to do it, please give me a shout … |
 | I currently have a Ubuntu 12.04 LTS box serving as a network repository for daily workstation backups for our HQ office. Throughout the day the Win7 workstations use Cobian Backup 11 to backup their user folders to their respective samaba shares on this server. At night this server rsyncs all … |
| | I have compiled and linked my code written in C and C++ and calling certain Windows APIs to a Win32 .dll using MinGW in Code::Blocks runnings on Windows XP. My code has also been compiled to and linked to create a Win32 .exe, which works successfully whilst communicating serially from …  |
| | I installed the new **pillow 2.0** on windows 7 python 3.3 using one of the installers with no problems. Apparently that installer provides the jpeg support necessary for Vegaseat's program (link below). However, I am having some kind of trouble getting the jpeg support to work on Ubuntu. After my …  |
 | hello i have this problem with vmware ...it removes my Ubuntu iso file all the time ..i downloaded it (ubuntu iso) in vmware ...and worked on ubuntu normally this week , the same thing exactly last week happened with mint iso ...my whole work is gone !!! thank god i … |
 | I have a desktop with windows 7 and ubuntu 12.04 and a laptop with same ubuntu. My desktop is connected to wired network through ethernet cable through a switch. Is it possible to connect and share The internet of my desktop with my laptop? can I use the switch any …  |
| |  |
| | I have a damaged machine (no working CD/DVD drive) no USB Boot option. How can I install Ubuntu 12.10? I have downloaded the ISO file and the Windows installer. The installer started once, ask for user ID and password, told me the Ubuntu folder already exest. It must be deleted …  |
| | Guys how do I install WxPython in Ubuntu? I tried following the directions here: But to no avail.... [URL="http://wiki.wxpython.org/InstallingOnUbuntuOrDebian"]http://wiki.wxpython.org/InstallingOnUbuntuOrDebian[/URL] Is there an easier way to do this? |
| | Hey folks, I was wondering if anyone can explain why my laptop overheats when using Windows (any version), but when using Linux (Ubuntu) I have no heating issues! Its not a major worry as I have recently moved over to Linux as my main system, but I am curious why … |
 | Hope this is the correct place to put this question. i am new to linux and am runnning ubuntu 12.04. I just installed Netbeans 7.0.1 and xampp 1.8.1, both running on ubuntu. i would like to make a c++ program that uses the MySql database that comes with xampp. I …  |
| | Using Ubuntu 12.10 have been using python 2.7 and python 3.2 successfully. 2.7 is my default interpreter. Now, after installing python 3.3 it looks like the python3.3 version of "/usr/include/python3.3" was not installed (as it is for "usr/include/python3.2" . I have already done "sudo apt-get install python-dev" . I discovered … |
| | Hi i have linux mint os i have instaled python..and also wxpython and now i cannot run my application fron anywhere how i can add a path that i can run my python scripts from anywhere in my pc.. |
| | Hey guys!! Can somebody help me... I cannot setup a glut project in codeblocks under ubuntu , it says The path you entered seems valid, but the wizard can't locate the include directory. This wizard cannot continue. -_-  |
| | Hello, as one of the forum members susgested - I need to learn PECL to use. So I tried today, but not succesfully. I tried installing random extention, I choose html_parse http://pecl.php.net/package/html_parse\ So as documentattin writes - I run: pecl install html_parse in the ubuntu command line. And get error … |
| | Hi all, A friend brought me this computer, it's a gateway NV53 with windows 7. The problem was that the HDD was locked. Everytime the computer is turned on, the message "Ennter HDD User Password" appears. For that, we got a new hard drive for it and a windows 7 … |
| | I am a newbie to Python. I just have 2yrs experience in C# Asp.net Web form. I have gone through a couple of tutorials but I am still not sure. So, I decided to do a project as a way of learning better and I need help and guidance to …  |
The End.