Networking Forum

What is the best network topologies for LAN gaming Center

**Bold Text Here**

I am trying to learn how to struct a network hardware...I have been reading and watching videos on the internet but i cant understand how to Configure the interfaces of with the appropriate IP address and activate the interfaces and how to Configure Vlan1 interface of each switch with IP …

Hi, I am not sure what is the best solution for my problem so I really need your advice. Here it goes... I have an intranet setup at work and I am acessing a web app from let's say IP 192.168.0.40. The intranet computer from which I am accessing it …

hi ive been noticing that when i'm playing online games my internet speed will lag or slow down. ive gone to speedtest.net and checked everything over there and this is the results from that: http://www.speedtest.net/result/2371030413.png i don't really know what those numbers mean at all and was wondering if anyone …

Its been a while since I've posted,but within this time period I've discovered a controversy that still leaves me unconfirmed.All the modifications to my ACPI x86 system have been done under my original warranty of 3 years, but all I wanted to know is why and for who.I can't say …

I have a home network with an ATT router and maybe 10 devices on it. One device, a dell latitude laptop running Windows XP is the issue here. This PC has always connected to the wireless network just fine, but today will not. I have worked with ATT, no help …

how to configure a new network,

during installing router what networking components are needed in the internet protocol (tcp/ip) properties setup

How Tor browser works? How it gives anonymity?

want to know much about server 2008 r2.please anybody with help should kindly help me out here.

I am trying to set up my Linksys E1200 as a wireless/wired access point on my home network. My main modem/router is SMC Networks SMC8014WN and my main PC is connected to it by cable and everything works fine. **Main router Settings:** IP 192.168.0.1 subnet mask 255.255.255.0 channel 6 WPA …

HI. I need clarifications coz im confused. In the public IP address, the classes. which is correct: Class A: **1.0.0.0 to 126.0.0.0** or Class A: **1.0.0.0 to 126.255.255.0** Class B: **128.0.0.0 to 191.0.0.0** or Class B: **128.0.0.0 to 191.255.255.0** Class C: **192.0.0.0 to 223.0.0.0** or Class C: **192.0.0.0 to 223.255.255.0** …

Hey! Im fairly horrible(and new) at networking :) But i have been trying to setup a Mumble server on my newly accuired Raspberry Pi (running debian wheezy). Now the server works internally. And have setup a virtul server path with my D-LINk router to my servers local ip. But nobody …

I am trying to setup a new router on my network. I've ordered a basic Dynamode BR-6004W-G-N router of Amazon, although it is basic it is much better then the current Netgear router which has a very limited selection of user controls. When attempting to connect it up to the …

I posted this over on CGTalk and was also redirected here to ask about the following which, if you'll excuse my lazyness, is a bit of a copy/paste: This is a call for advice on switch traffic theory for a small-sized (~13 artists) VFX studio. For the most part, we …

Anyone to get me into this topic i want to get to know these.

I have a broad band internet connection. When I dial the dialer it connects to internet. Thing needs to mention that I dont need any modem or anything for dialing purpose. I want to make a wifi hopspot with that connection. As I dont have any static IP there in …

hi my goal is access a webpage (Jsp) which is running on my home pc from outside the world. for the above mention reason i followed below step but i m unable to access from my office/other network 1. registered with no-ip <br /> Hostname:callto.redirectme.net Host Type: Port 80 IP …

plzz help... http://speedtest.in/results/12110293e01edd3b7fa9e60491cb88b076bd this website n other all website same result except http://www.speedtest.net/result/2328677319.png first one is showing me more speed to download.. and i m getting only 70-80 kbps... plzz help... :(

Hello everyone, I wanna make software like ipmsg aur any lan mssnger software . Please any one guide me from where i can start my work . I am good in coding but dont wanna from where i have to start this .

we have a wireless network, where all computers in the office are connected to a router which is connected to modem for internet access. the problem is I cannot see the other pc's on the network.

They say even without an internet connection, you can still have a network if you have a hub/router/switch and 2 or more computers. How does it works?

Hey guys, This question is pointed at the guys working with voip. Here's the story, One of my client brought me an ATA device telling me there is no more dial tone. I check the hardware and no physical damage. So i tried to enter the admin section. Did * …

i want paypal sand box to access my localhost , it needs some port forwarding, i have *ZTE ZxDSL 831 series *

We are using XP as an operating system in our office; all the files on every pc are place on the network drives (about 6 or 8 network drives). How can I backup or sync all network drives on an external drive which is on the server? What softwares can …

The university has 7 departments namely, IT, Finance, HR, Management, Faculty, Students and RD. The RD department should not have access to the internet. Each department contains the following number of users: IT - 20, FINANCE - 10, HR - 5, MANAGEMENT - 30, FACULTY - 100, STUDENTS - 1500, …

Q. 1. Different topologies behave differently when a connection fails. You are required to discuss the effect on the network when only one device connection fails in the following cases.. 1. Seven devices are connected through a ring topology. 2. Six devices are connected through a dual ring topology. 3. …

When a switch is selected as root bridge why are all ports on that switch in forward mode? I know switches that are connected to each other by two ports have one blocked port and one forward so theres only one why for frames to go so no loops are …

Okay, so my office is having an issue with one of our computers. We have a domain that all of our computers are connected too and where we store our files. Earlier this week we reset the password for our domain and now one of our computers erases the Network …

Have 10 computers and I want to connect them on a network without using a server, how possible is this and what is the easiest way to do it?

Hello Daniweb, I'm having some issues with getting my Domain to go to my website. I registered my domain through 123-Reg.co.uk and I've forwarded to the servers which are hosting my site. I can get the website to load when I go through a proxy, but when I try and …

I was wondering if anyone can help... I cannot access the Internet on my laptop. Firstly I am terrible with technology so be kind to me... Came home to find my Internet wouldn't work, switched router on and off (yes I waited 20 seconds) but kept getting no Internet come …

Hello Networking Gurus of the Internet! I am trying to figure out the difference between MoCa (Media over Coaxial Alliance) and PDSL (Power Line Digitial Subscriber Line). I've been using PDSL for many years, however I've recently seen this MoCa thing which appears to do the same thing but instead …

what is networking security

Hi all i have a tiny question I have 5 IBM Blade servers running at my home using 1 external Static IP Address, is there any way i can forward certain ports to the different servers and people outside the network can access that Server instead of using DMZ on …

Pros: HARDCORE COVERAGE! Easy installation Lots of options dual band USB sharing 4 guest networks per band fast nice setup menus that look good and easy to navigate lots of security support connections are solid Cons: only thing is lack of print server, other than that it's perfect. Other Thoughts: …

im connected to wifi network at my office but unable to access the internet pls help me to fix it.

NO STUDENT LEFT BEHIND School of Excellence has recently received a donation of computers and network equipment from a benefactor from canada, with the promise that there will be futher donation in cash and kind should the school be able to provide demonstrable evidence of their meaningful use of the …

ping to my server is often very erractic and slow,i dont know if it is the router that is causing yhis or is from the providers side

for the lower three layers of the ISO Open System Interconnection model, what are the network device that operate each layer and their explaination?

How **Robots.txt** is to be placed in the web site?

Hi i am rk sagar i want to use a Wifai network

Hi all, I hope some one can help me here. This is the settings for my TPlink WR940N router which I am using as my primary router. I want to connect a TP Link WR740N and a Linksys WRT54GL as two bridges from the primary router. (I need 3 to …

Alright, first I would like to apologize in advance that it is late and I'm tiered, and therefor might make some mistakes or word things weird. Alright. So I have an old laptop computer from the late 80's that only has a dialup modem on it, no LAN (although it …

how we use different waves(radio,microwaves) as they can conflict with each other and they share the same ISM band..like bluetooth use low power to signal so not to conflict with others and i know that we use different frequencies for different technoligies..

I need driver wireless of dell latitude c510/c610 plz help me and thx

please tell me the answer of this question i am not good in advanced maths

I use Win 7 OS. My home connection is named linksys and the connection I try to connect at work is named linksys. When I try to connect at work I get an error message my settings are wrong. I don't want to change the network profile setting otherwise I …

1.Are the token rings same as star topology? 2. what is the big difference between Ethernet and token ring? 3.are these two(ethernet ,token ring) capable of trnamitting data at the same time? thanks