smferoz

HI, This error occurs when SMTP service is not working properly check whether SMTP service is running and check in registry in HKLM------Software----Microsoft----Windows--------Outlook remove all the rdp_ defined all the four in right hand box and restart your system and try to send mail .It should work.

Hi, It is better to reset password for Administrator instead of searching for Password in registry and you have to follow below steps : 1) Open your CPU Cabinet while the system is running . 2) Restart your computer 3) On MotherBoard there is a Battery just remove the battery …

Hi, UDP is defined as "User DataGram Protocol" and it clearly mentions it is not reliable and UDP is Connectionless whereas tcp is a connection oriented connectionless means there is no 3 Way Hand Shake.

Hi, You can name the Title of the Project as "StateFul Packet Filtering". The topics should be "State Table" and "Intrusion Detection System" "Intrusion Prevention System (IPS)".How IDS and IPS works and where the copy of packet is stored .The copy of Packet reaching destination is stored in State Table …

Hi, You can just change the Boot Sequence in order to show OS FLoppy Drive as A:/.You can change boot sequence through Bios Setup Hardware configuration.You can enter boot sequence either by pressing F10 or Delete while rebooting your system and change the settings and make floppy disk as primary …

Hi, When you are trying to Install OS you are getting MBR Partition you can format disk through command prompt and can make Partitions and install OS .Make floppy as primary bootable disk and reboot your system in command prompt once the bios sequence has been changed the prompt will …

Hi, DNS is defined as Domain Name Server.And this DNS is divided into 2 one is Forward Lookup-Bias and another is Reverse Lookup Bias.In Forward lookup bias it converts IP address to Hostname and in Reverse lookup bias it converts Hostname to IP Address.To see the conversion one has to …

Hi, There is a problem with the Disk you are using to install XP ,Use another XP OS disk and try installing OS .It will work.

Hi, Contact your ISP provider from where Internet connection is reached to your destination.check the modem status or else check your desktop PC LanCard replace it once and try connecting to Internet.

HI, Usually if a person is facing difficulty in any aspect of his life then the basic foundation in his/her career is not strong in the same manner if a Network Administrator who is a real time Administrator is facing problem in Career field then their basic foundation is not …

Hi, To check whether your NIC is working properly run this command in command promt as below : Ping 127.0.0.1 if the ping response is complete then your nic is working properly and moreover check the slot where the NIC is installed could be problem with the slot or cabling …

Hi, IP Addressing is a main concept in Networking field and ip addressing plays a vital role in Networking topology.Depending on class ip addressing is divided into 4 types and they are as below : Class A Class B Class C Class D Class E Class A ip ranges from …

Hi, Cat5 is the Cable and RJ45 is the Jack where climping of Cat5 cable is done for connection between peers.And for similar devices the cabling sequence is cross cabling and for dissimilar devices the cabling is straight cabling.And in todays world market one can get OFC (optical Fibre Cabling …

Hi, If you want to a Project on Networking then you can proceed with "Network Security" Project.It gives an idea how a Network can be made secure and what are the different methods of securing your Network and how a "Stateful Inspection Firewall" Works and advantages and overcomes in Network …

Hi, Router is a device for connecting different Networks with the help of Router one can configure different Routing protocols for communication between Networks and to know more about Routing protocols you are required to go through CCNA Course as i try to make you understand you will not be …

Hi, You can define that particular port on VLAN 10 and can modify accordingly and Dynamic is desireable as Switch will define that particular port number on particular Vlan with modifications accordingly.

Hi, It is the ip of Kiosk (10.254.22.0) and 255.255.255.0 and 255.255.255.255 is classless subnetting and it is not classfull Subnetting.

Hi, Try pinging 127.0.0.1 if you are able to ping then your lancard is working fine or else check the RJ45 jack colour sequence as it is 2 dissimilar devices the cabling should be Straight cabling mostly the cabling sequence might be wrong it should be straight cabling and not …

Hi, This is not the problem of Quintums Gateway on either side it is the switch problem check for switch configuration and modify configuration and make the ports open.

Hi, ASA has many features when compared with LinkSys Firewall .ASA Firewall is more secure and reliable one can configure Failovers and VPN and on ASA Firewall .

Hi, 1)IGMP 2)data bytes before 1000 have been successfully received 3)Ip 4)IP

Hi, There is nothing to worry it is just your facebook settings select the proper location and for ip address you can just check out your tcp/ip settings and moreover you can spoof your MacAddress and check once.

Hi, This is possible but you need to be very strong on Techincal Skills to proceed further with making a HDD dual OS where Vista is Already Installed follow below steps: 1) Take a Bootable Windows XP Cd and insert it in CD Rom drive . 2) select the version …

Hi, To Format your PC take a bootable disk for ex.Floppy and insert it is floppy drive and restart your system goto bios settings by pressing either f12 or Delete key on keyboard and change the boot sequence to primarily boot with Flopy drive and save changes by pressing f10 …

Hi, To get rid of slow connectivity problems you can proceed with below steps to reduce TCO of your organization. 1) goto start -----run----Services-----disable services which are of no use and can increase performance issue you can disable Alert and Computer browser service,you can disable few more services which are …

Hi, In Simple way i can tell you something about Networking If one is thorugh enough in OSI layer concept the whole Networking lies on OSI layer concept which contains 7 layers on Source Side and 7 Layers on Destination Side.OSI stands for Open Systems InterNetworking.The 7 layers in OSI …

Hi, I hope your switch port on particular port has been configured on SWitch and blocking your Port Number from Switch check if there is any Int fa01 in switch is configured and check where your system ip lies on switch in which Interface of FastEthernet (Int Fa01 or 02 …

Hi, you might have configured Serial Port and might have not connected Ethernet port to your system or switch or to a Router .please do check for Connections .

Hi, OSI Layer in Simple is like 7 layers on Source Side and 7 layers on Destination Side and without these 7 layers nothing is possible in Networkin Concept. 1) Physical Layer in the sense not only electric Box but it includes many things required for Networking like Lan Card,Sound …

Hi, To Access Lan computer all drives you should be an Administrator of that particular Domain and can gain access to all drives and folders and files .

Hi, Ping is nothing but "Packet Interface Goofing" and one can see a detail expalnation on each Ping command bu following these steps as below : goto----start-----cmd-----and type ping /? and press enter you can view a detail description on each ping command.

Hi, To,Connect to Lan Cat5 cable is used but there is climping sequence for connecting into LAN for Similar devices the cabling should be Cross Cabling and for dissimilar devices it should be Staraight Cabling.The colour sequence makes sense in cabling and if the colour sequence is not maintained then …

Hi, To over come this issue boot your system and press F8 and run your system in SafeMode Option and goto ---start-----run----type Services .msc------select RPC Service and got tab Recovery and there it will be restart your system or service change it to Take No Action and save changes and …

Hi, Whenever you listen to beep sound make a note that it usually occurs due to RAM .Try to replace Ram and check from your end or else replace it with new Ram and boot your system.

Hi, There are modifications done to your computer which you are trying to access properties on My Computer.Someone might have done changes to Group Policy and you try to access GPEDIT.MSC and check for settings and if u see any changes related to settings then please do modify settings and …

Hi, If the error while booting is "Boot Disk Failure" then you try to run system in Safe Mode and check for error details in Event viewer .As you said someone has removed HDD from server check for IDE cable and Jumper Settings on HDD .I hope someone might have …

Hi, This is a Technical Issue wherein you r connected to Internet through Dialup as there is router provided by ISP which is .35 modem on client side and .62 on ISP side .Could you open your modem connectivity and make changes in modem with a speed of 36000 it …

Hi, The Answer to your query is simple try to open Antivirus installed on your system you might have blocked incoming and outgoing traffic.Try to check for settings on the installed Antivirus on your Desktop PC and make necessary changes and also make changes in IE Settings as below : …