bobbyraw

you can use a program called partition magic and move space from the D drive to the C drive. you would use the option to resize partition

Sorry Amit the registry doe not report any information from the bios. to find out if the bios password is set try pressing the corresponding key to go into the bios, if the password is set then you will be ask to enter the password.

your laptop went into hibernation and cannot wake up. try starting in safe mode and go to control panel, power management and turn off hibernation. then restore you pc to yesterday.

try to start the pc in safe mode. press F8 as soon as you see the windows boot memu

[QUOTE=hillfolk;532707]I have a 40 GB hard drive loaded with windows xp home that has been converted to an external hard drive and an old emachines 333i loaded with windows 98 that crashed. I'm wondering if I bring the 32 bit DDRam up to minimum system requirements for xp if I …

if you crat the share on one pc and try to do the back up from another you have to give the second pc access permission to the drive and permission MUST include read/write.

they are a good way to preview the thread, one to know if you can solve or know what the person is talking about. Without having to open and read the entire thread.

I must say i am very pleased with the new feature that is shown for each threads. We can now see the age of a post instead of opening the post only to find out it's 5 years old. Great job Dani

why not try the trial version from the web site then install the full dvd version over it. and clean the disk as caper suggest

your pc is infected with some malware. you should run adaware, spybot Search and destroy. just so you know malware and trojan alwas target system restore point, so that if you restore you are still infected

you may want to check if the IMAPI service is turned on. and set to automatic. right click mycomputer icon, go to manage and select services look in the list for IMAPI

how much space is available on the HDD? check the configuration for WMP , make sure it's not set to digital recording?if it has the feature to enable atapi drivers, check for this in the cd bruner tab.

check system properties and see if the nic is disables or have a yellow ? over it. update the drive and try again

that might be the problem the bios setting. what does the bios recognized the drive as. you may have to turn on large support in the bios. and as for the boot order you have to set that in the bios also the bios will read the IDE as the …

is thai an hyperlink that YOU sent to the email address to do the test. if not try sending one yourself. also right clcik the hyperlink and take a look at the properties. it should show you the root URL

sound like you have bed memory. remove the memory models and test each seperately Step: remove memory start pc -do ou hear the beep shut down, install memory do you hear the beep. Shut down remove memory, install next module reboot do you hear the beep. THIS IS BASE ON …

cd-r is the better choice. you want to make sure the cd is burned and finalized. it the car radio plays mp3's you can put a whole lot more music on the disk.

Z your cache may be holding on too tight, refresh your browser and see what happen Don't know what this might have to do with this post but just to get it out there i tried logging on around 5:45 PM and Could not get the web page at all. …

you can simple do a search for the pst file set the search to lokok in hidden folders then copy the file to another folder you created, then back up the folder. it also seem like you got an infection going on. you want to run a spyware/malware scan

instead of copying the files to the partition. you should use the cd to bot then install on the new partition you created.

here are the steps you can try to sort by group. right click on a empty area in the Windows Explorer window. then Click on Sort By, Group by, or Stack By. Choose the sort order you want the window to be sorted by.

@ mapley have you tried updating windows, then try getting the latest driver for your wireless card. PS before u update deleted the file that causing the BSOD then run the lasted software update for the card

and to add when you get in the bios let us know if the drive is detected.

the link work and thats a pretty neat trick

what type of error are you getting when you boot from the Hard drive

this is happening because 1 your hard drive might be bad 2 your system files are messed up do as the previous post say do a repair install with the XP cd set your bios to boot from the cd first.

try running fdisk on the partition or do a standard format from the command prompt. you would ahve to use the cd to boot to the command prompt.

try the lcd display menu. try different settings and you might want to check out the size of the font that is being used. as stated earlier the crt will show certain fonts better that the lcd you just have to find the right setting

>>>>The document name or path is not valid. *check the file permissions for the document. * Use the file open dialog box to locate the document.<<<< this sis telling you that the file on the recent open list, the location of the file has change, all you have to do …

did you install MCE 2005 yourself or did you get it on a PC your purchase. the feature might have to be installed from the cd.

you seem to have a cross link registry entry. use a 3rd party program to scan your registry and see if that will retore the correct program to associate for each program

the thmpnail view is ONLY available when you are veiwing picture on windows 2000 try this if your is totally missing [url]http://support.microsoft.com/kb/243401/en-us[/url]

run this scan from the command prompt sfc /scannow it will tell you if any system file is missing or corrupted. you might need to have your XP cd

did you see the age of this post. [QUOTE=caperjack;583358]so did you also just install sp2,you say just the normal windows startup ,does that mean that you can boot into winxp and everything works ok. could be a keyboard problem ,are you tapping the f8 key over and over as soon …

infection, are you running the latest update for the scanning program you are using.

once you get to the partition screen in windows setup you can delete all the partition that are shown and then you will have one large partition. then format it it the standard way do not use the quick format..

what device have you installed recently. boot into safe mode with network go tot he manufacturer website and download the latest drive. (extract if you have to ) then remove the device though system properties and reboot, when windows find the new device browse to the folder you have the …

how about reinstalling the printer from the cd or downloaded drivers

have you updated windows recently. go the the update site and download all critical and reccomended updates

[QUOTE=taya74;559602]I bought a new computer which has Vista and a wireless modem. It worked perfectly until 3 months ago when every 1-2 days the Internet and Email will suddenly stop working and give error message such as page cannot be displayed. But I can ping, the network and sharing centre …

Looks good Dani....But instead of opening a psge why not have a drop down menu to select exactly what you want from each main topic, PS after the page open some people would still be lost......Just a suggestion

here is a work around defrag the HDD. and this is due to the compression thats on the .WMF files and your catalog file might be damaged. try reinstalling office and set everything to run from your hard drive.when you are done open power pint and run the clip organizer …

all the file below that are set to run on your pc. do you recognized them. if you are getting explorer exe error windows is getting critical. run the scans above and then do a repair install. some of these programs can be stopped. O4 - HKLM\..\Run: [SunJavaUpdateSched] "C:\Program Files\Java\jre1.6.0_05\bin\jusched.exe" …

restart the installation and do a standard format of the hard drive DO NOT select the quick format option. if you are given the option to delete the partition do that and then create a new one

simple put your NIC is fried. thats the worst. if not here are a few thing, if you get a 169 Ip address it can be fixed, but if the fix resort back to the 169 then the card is definitely fried. is this card on board or PCI. no …

check the jumpers on the hard drive, are they both on the save ide cable. if so, remove the clave, set the master to single hard drive then try to use the bios to detect it. after you boot up shut down set the master jumper to master with slave …

the power connection should only be connected one way positive + to positive + pole and negative - to negative - pole. turning them around with short your mother board. the manual that came with you mother board should give you an indication of the polarity of the connections. if …

[QUOTE=Oompa D.;561370]So... I got a new computer and decided to try and upgrade the old one. [COLOR="Red"][U]I went out and bought a DDR2 card.[/U][/COLOR] [U][COLOR="Green"]Come to find out, the slot was actually for a regular DDR card[/COLOR][/U]. [COLOR="Red"]:scared: [/COLOR] but when i hit the power, it wouldn't boot. Now,all it …

When you reformat the drive, did you use quick format or standard. and at what stage does the computer freezes, as soon as it start, after a few minutes, when you try to run a program.

have you added a new wireless device (cordless phone) or microwave recently. when you do ipconfig are you getting an IP address starting with 169.xxx.xx. what type of encryption are you using on the router.