ramjo

Are you using a workgroup or a domain? it can be picky sometimes depending on computer or NIC. Also check your IP settings they might on the wrong gateway

Can you try looking for a reset button that's within the laptop? Some laptops have them and reset the whole bios or also try to remove the main battery of the laptop for around 5min that also may work to reset the BIOS.

Download a software called unlocker it checks what processed are running on the file and can dive you the option to either delete the file or kill the process

Download active kill disk it will delete all data and wont have a chance of rocovering them again.

I am trying to create a table with a multikey but given i have to create a trigger and a sequence to place an auto increment key i am having difficulties on how to set a foreign key to be attached to a multi key. any help will be appreciated

Do you hear any POST (Power On Self Test) when you boot up the machine? If not it means your motherboard or a hardware within it has a problem

what if you virtualise the windows 98 using virtual box or vmware?

have you checked the video data cable to see whether it is defective

have you set the xammp server to be online.. that way it can be accessed on the LAN

have you tried to disable the startup programs using msconfig

try this command on cmd(command prompt) shutdown -s -t 1

here's mine Lock Hunter and Unlocker: for unlocking processes [url]http://lockhunter.com/[/url] [url]http://ccollomb.free.fr/unlocker/[/url] Copy Handle: for handling copying in the best queuing manner [url]http://www.copyhandler.com/[/url] Codec Packs: Sites for getting video and audio plugins and codecs [url]http://www.free-codecs.com/[/url] Komodo: Programming IDE Editor [url]http://www.activestate.com/komodo-ide[/url] Programmers Notepad: Lightweight programming utility [url]http://www.pnotepad.org/[/url]

hack how exactly coz you haven't specified if it's locked by BIOS or by operating system?

How many Hard disks do you have.. and also is it being detected by the bios when POST starts?

try disabling mcshield.exe it could be taking much of your memory on access scan as i have experienced in many machines that have Mcafee.. go to run type msconfig.exe then uncheck the mcafee files in startup tab and also in the services tab..

Remove the Hard disk from thhe laptop(when turned off). turn on the laptop without the hard disk inside and without any bootable cd in the DVD-ROM. It will restart twice the second time saying there is no valid system disk and should place one. Place the Bootable CD or recoverydisk …

Have you tried to reset the bios to see of it's the bios having the problem

Try this when you are at the logon screen press ctrl+alt+del as many time as possible you will get a dialog logon screen. On the user text box type 'Administrator' (without the '') and Press Enter no passowrds. Try that first and see.

Do you of any site sites that has open source on KMS or any website that i can go to see what king of information i can get on how to create on php.

What if your problem isn't with the system rather than with your hard disk. I had problem with a HP laptop way back i problem reinstalling windows because it kept giving me the blue screen. then i partioned it. afterwards i installed an antvirus to scan for any virus since …

what kind of memory stick was on your motherboard ddr1 or ddr 2 or sd ram what was the speed if it was a ddr2 533 or ddr 400 and was the memory stick you bought the same at that of the motherboard and was it supported by the motherboard

Is your hard disk detected by bios if so try using fdisk of active kill disk to erase the drive. If you want to recover a partiton to sace data get partion table doctor save the data you need then format the hard drive

i think your registry is corrupt and it's looping because the required driver or rigistry is deleted or corrupt. can you get into the system using a multiboot recovery disk to restore your registry settings or reinstalll the system with the recovery mode where you wont need to format the …

can you try ro reset the CMOS and then try to manuall check whether the DVD burner are recognised

I have a 120Gb seagate harddisk that is bringing me problems. It started having system checking issues and it was not completing to scan it using chkdisk. When i reboot the system, it says that it cannot find the system disk and on further checking i find out that the …

What have you installed that starts up when you windows logons and what video and audio plugins and codecs have you placed?

It seems you have alot of things which you are loading at startup that is why it's taking so long. use the run dialog and type 'msconfig'(without the qoutes) you will get to the system configuration utility. Go to the startup tab and deselect what you don't need at start …

did you try the 'net user admin *' command

does the motherboard support the 320gb hard drive and when you remove the seagate drive does it work porperly

i would say that your partion table is corrupted and it has affected the master boot record. try and get a windows service pack 1 cd and try the recovery console or use (cautiously) the fdisk of the windows98 SE cd or the floppy assumming you are using FAT32 not …

when you were installing mozilla did it ask whether it could instal the yahoo toolbar and have you checked in the settings of the browser if you can disable the option

have you checked in the BIOS if the combo is there coz it would mean you have a hardware problem not software or system

first of all is your motherboard compatible with the hard drive coz in most cases it might be overworking causing the stalling

was the file desktop_.ini or desktop.ini? if it's the first one then it's the fujacks virus but you confirm which one it is first.

is it a system passowrd or a bios password? if it's a bios password just open your tower or cpu and look for jumper-4 usually has 3-pins remove the jumper from the first two and set it to the next two. if it's a system password which operating system

what is the extension of th e file that you want to make the executable disc from. You can make a image with roxio by inputing your file in data form and when you want to burn on the drive or writer's option you choose the image recorder that will …

could be your registry is corrupt can u try and fix it and see what happens

What about heat and dust from the other casing is it providing enbough ventilation for the hardware in the case

Have you tried to reset the BIOS of the laptop to see whether it's the bios settings thats acting up

What about POST beep do you hear it and also have u tried to reset the BIOS of the system. Did you place anything new software or hardware

have u tried to disable startup items in msconfig that are not needed by the system to see whether it's one of the programs it starts up windows with that could be causing your system to crash. Disable them in safe mode using msconfig in run command then see what …

they may be static. try using antistatic liquid to wash away any dust or dist that may be on the keyboard

It you wnat a recovery CD that could help you recover all the data and also you don't format then use UBCD or Minipe live CD editions. They also have antiviruses which can also scan your hard disk for any viruses. Or if you can get to windows try using …

It seems what you did is erased a system file that is needed in the windows. can u recover your registry to see whther you can restore. Get MINI PE or UBCD

Does POST beep to indicate evrything is working and also have you checked whether the connections you disassembled are connected okay

Try unlplugging the cpu fan for the processor and dust it then unplug the power cord connecting the motherboard then reconnect them

I Had the same problem with alsmost the same specs and i had disconnect the memory, hard disk and floppy drive from the motherboard dusted it and then placed the memory only to see if it will work afterward reconnceted them and worked fine.

You could be having a virus call New Pe_Heur virus which clears up your desktop and renders your system useless. The best thing is to get a MINI PE or a UBCD to try and partition and move your data to a safe location then reinstall.

Have u tried to find a reset button and it has to have a battery within the laptop.

Raskesh Is the hard disk detected in the BIOS if so did you partition your hard disk with which format