bobbyraw

i have seem so many people used can air wreak havoc on there pc it's not funny. did any of the liquid spray out while you were using the can? as for the error you are having it would seem like there was an update to the bios that the …

most bios have a F3 key to detect hdd. if u are not able to detech the hdd that way, u definately want to check the cable as caperjack stated. ensure the cable is oriented correctly, and the jumber is correct on the hdd.

thanks for the shout out bard. we have very hardworking volunteers here who ensure that your problems will be solved.

there is a FN key (in blue) and another key with a shape of a monitor on it (in blue) hold the Fn key and press the key with the monitor icon on it. u might have to do it a few times but pause in between eg hold Fn …

yes acronis can set up your hdd for dual boot. and it also has its own bootloader

no u cant and this is the reason y they done allow employees to run file, on a computer. if u are tyring to do this think carefully about your job, do u love u want to keep it. just use the company pc for company work?? just so u …

herer is a easy solution u can try, .......do u have the restore cd that came with the computer. if so do a clean install. then install vista.

yeah u can wipe the hdd if u have a bootable xp cd, there are utility that u can use to get the account passwords but u would need internet to get them.

what is the error message u are getting?

your cd burner what are the spec, is it cd/rw +- or just + or - and what thype of mediat are u using, some time if u use a cd that is a minua or plus only your burner might not read it.

what is the purpose of this HJT list, we are great here but not mind readers what whats heppening y u had to post a HJT list.

find the file remane it, look in msconfig (start>run>type MSCONFIG. press enter then go to startup tab for any mention of it. disable it restart and see what happen

this does not have anything to do with the power supply. Your CPU is whats bad, check the fan, heatsink and thermal grease. if the grease if hard get it replace, if u have another processor thats is identical you could try replacing the present one.

here is what u need to do, boot withthe xp cd go to the repair console, run fdisk, check howmany partition are on the hdd, delete all and make one partitions, then do a format. when u get to the install section if it ask to format the partition do …

check the ip address on the computer, if u have a 169 they will not connect

whats happen here, are u getting an error when u tru to boot xp, what is the error? when does the error happen, on boot up? log on screen? in safe mode only? in normal mode?

can u connect the hdd to the primary cable as a slave to chek if the drive still work, if thst does then u have to get a new case for the hdd

did u get a set of restore cd with the computer?

it does not amtter where windows is reporting the devices to be, just follow caperjack link

did u change any hardware configuration recently?

check the jumper setting on the hdd, master with slave,master/slave and although it really don't matter much ensure the master is at the end of the cable

seem like a bad mobo. but seeing that all the pc are identical, try one of the other processors on the mobo, but i beleive it's the mobo when u are not getting anything to the monitor or for it to post

any of the option listed are viable, or have him burn them to 2 dvd or one 8g dvd i would say the ftp is a best bet cheap and fast.

i am now a happy forum guru, i see one of my suggestion has beed done, nice going dani, i have a lot more suggestion that can improve this forum, all the best and keep up the great sorry scratch that excellent work

is this vista you are using. here is a easy way to chek if u can upload creat a new txt file save to desk top then go to myspace and see if u can upload that txt file.

can u remove the battery pack, and the cmos batter for a few hours, then inset and try restarting. also connect an external monitor ans switch it the external mon, if u get pic then the mon conn to the lcd screen might be damaged.

read this it might help [url]http://support.microsoft.com/kb/315403[/url]

this is very simular to a recent problem i posted here. and base on the info i beleive your mobo is fried. here is how u can verify this. remove everp piece of hardware EXCEPT processor and memory. if ir come one then the board is good,,,,,,,,HOWEVER if u start …

well the best way to get a trusted one is to go to a retail store, because i have quite a few copies and i could sell but u would still not trust the source right?

how are u shutting down the pc is it via the pwr button or the start menu?

@ gezer bob if u check the manual for the palm, there is a way to reset to factory default. you will oose all data store, there is also another way to reset the device find the reset hole them hold a pointed object while turnig on the palm. here …

i feel your pain i had the hardest time getting started in the it field. it's funny how every one want u to have a Bs, or Ms and yet they are not willing to hire when u graduate.....does your college have a placement center. da search for entry level …

i am happy this site ahs evolved so well, not to put the dogs done but this is far better use. but there canb be so much more improvements for eg all post should have the solve button and all solve post shoulve be listed as a sub category to …

what does a moderator do, though, i am sure the queen has a process, and i would assumed that it would be base on quite a few thing most importantlym trust and reliabilty to name a few,

what version of outlook and out look express are u using

under vista what is the file sysem on the hdd,

for that particular media u have only one lic. basically u have a lic for the media u bought

if u know how to go into the registry u can get rid of these messages. ther comes up because the program that controll these files are set in the registry to run each time u start the pc, did u remove any software recently,

in control panel go to network and internet>network and sharing center> under sharing and discovery ensure that the following options are turned on network discovery, file sharing and publuc folder sharing,

try to start in safe mode. check computer management and look at the droved on the pc. make sure the correct one is set to active, then check bios that you are booting from the right hdd. these things happen for no apparent reason some times.

you would have to have access to the router config setting to spoof the guy , set a wep key rename the SSID, this can be done from any computer in the house as long as you have the router address which can be found on the manufacturer site of …

do u have DB program running on the computer.

does the game still run in the background when u press CTRL+ALT+DEL. if so u might need to increase the refresh rate for the monitor. check the game requirement for the display resolution and change the refresh to match

if the pc does not post u cant run the program, open the case and look on the mobo for the name.

take to a pc repair shop some can make a cable for the monitor or splice the end to give u a diff connector

[quote=damir_ruff;464101]Hi, I can tell you that you are lacky man that even starts in safe mode when you change some new parts especially MB your windows can't even boot in safe mode.So I'm telling you if you are having some personal files move them in other partition and install a …

i am guessing the pc does not post . ......even with the momitor blank you know know if the pc POST, your key board witll flash, your floppy will make a grinding sound(if u have one). now if the hdd light stays on one of 2 things, the cable is …

ok clean up your cache, temp files and if this does not fix the prob, find out from your ISP if ther is an outage on your node that would affest you. PS if this only happens whe u surf maybe a bug, in your pc. do a scn now …

[COLOR=red][B][U]never flash a bios unless obsolutely necessary.[/U][/B][/COLOR] [B][U][COLOR=#ff0000][/COLOR][/U][/B] CAN U GO INTO THE BIOS WHEN THE PC STARTS.??? can u get to safe mode

1 you would ahve to remove the security from each computer. or if u manager all computer from one server you can set group policies to allow access to each user to access any computer.